[PATCH 04/13] powerpc/powernv: Add platform-specific services for opencapi

[Andrew Donnellan]

On 19/12/17 02:21, Frederic Barrat wrote:
> Implement a few platform-specific calls which can be used by drivers:
> 
> - provide the Transaction Layer capabilities of the host, so that the
>    driver can find some common ground and configure the device and host
>    appropriately.
> 
> - provide the hw interrupt to be used for translation faults raised by
>    the NPU
> 
> - map/unmap some NPU mmio registers to get the fault context when the
>    NPU raises an address translation fault
> 
> The rest are wrappers around the previously-introduced opal calls.
> 
> 
> Signed-off-by: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
> ---
>   arch/powerpc/include/asm/pnv-ocxl.h     |  36 ++++++
>   arch/powerpc/platforms/powernv/Makefile |   1 +
>   arch/powerpc/platforms/powernv/ocxl.c   | 187 ++++++++++++++++++++++++++++++++
>   3 files changed, 224 insertions(+)
>   create mode 100644 arch/powerpc/include/asm/pnv-ocxl.h
>   create mode 100644 arch/powerpc/platforms/powernv/ocxl.c
> 
> diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h
> new file mode 100644
> index 000000000000..b9ab3f0a9634
> --- /dev/null
> +++ b/arch/powerpc/include/asm/pnv-ocxl.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright 2017 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#ifndef _ASM_PVN_OCXL_H
> +#define _ASM_PVN_OCXL_H

I assume you meant "PNV" here.

> +
> +#include <linux/pci.h>
> +
> +#define PNV_OCXL_TL_MAX_TEMPLATE        63
> +#define PNV_OCXL_TL_BITS_PER_RATE       4
> +#define PNV_OCXL_TL_RATE_BUF_SIZE       ((PNV_OCXL_TL_MAX_TEMPLATE+1) * PNV_OCXL_TL_BITS_PER_RATE / 8)
> +
> +extern int pnv_ocxl_get_tl_cap(struct pci_dev *dev, long *cap,
> +			char *rate_buf, int rate_buf_size);
> +extern int pnv_ocxl_set_tl_conf(struct pci_dev *dev, long cap,
> +			uint64_t rate_buf_phys, int rate_buf_size);
> +
> +extern int pnv_ocxl_get_xsl_irq(struct pci_dev *dev, int *hwirq);
> +extern void pnv_ocxl_unmap_xsl_regs(void __iomem *dsisr, void __iomem *dar,
> +				void __iomem *tfc, void __iomem *pe_handle);
> +extern int pnv_ocxl_map_xsl_regs(struct pci_dev *dev, void __iomem **dsisr,
> +				void __iomem **dar, void __iomem **tfc,
> +				void __iomem **pe_handle);
> +
> +extern int pnv_ocxl_spa_setup(struct pci_dev *dev, void *spa_mem, int PE_mask,
> +			void **platform_data);
> +extern void pnv_ocxl_spa_release(void *platform_data);
> +extern int pnv_ocxl_spa_remove_pe(void *platform_data, int pe_handle);
> +
> +#endif /* _ASM_PVN_OCXL_H */

And here

> diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
> index 3732118a0482..6c9d5199a7e2 100644
> --- a/arch/powerpc/platforms/powernv/Makefile
> +++ b/arch/powerpc/platforms/powernv/Makefile
> @@ -17,3 +17,4 @@ obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
>   obj-$(CONFIG_PPC_MEMTRACE)	+= memtrace.o
>   obj-$(CONFIG_PPC_VAS)	+= vas.o vas-window.o vas-debug.o
>   obj-$(CONFIG_PPC_FTW)	+= nx-ftw.o
> +obj-$(CONFIG_OCXL_BASE)	+= ocxl.o
> diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
> new file mode 100644
> index 000000000000..3378b75cf5e5
> --- /dev/null
> +++ b/arch/powerpc/platforms/powernv/ocxl.c
> +int pnv_ocxl_get_xsl_irq(struct pci_dev *dev, int *hwirq)
> +{
> +	int rc;
> +
> +	rc = of_property_read_u32(dev->dev.of_node, "ibm,opal-xsl-irq", hwirq);
> +	if (rc) {
> +		dev_err(&dev->dev,
> +			"Can't translation xsl interrupt for device\n");

Can't get?


-- 
Andrew Donnellan              OzLabs, ADL Canberra
andrew.donnellan at au1.ibm.com  IBM Australia Limited