[PATCH v9 1/2] powerpc/powernv: Enable tunneled operations

Frederic Barrat fbarrat at linux.vnet.ibm.com
Wed Feb 21 20:46:41 AEDT 2018



Le 20/02/2018 à 16:51, Philippe Bergheaud a écrit :
> P9 supports PCI tunneled operations (atomics and as_notify). This
> patch adds support for tunneled operations on powernv, with a new
> API, to be called by device drivers:
> 
> pnv_pci_enable_tunnel()
>     Enable tunnel operations, tell driver the 16-bit ASN indication
>     used by kernel.
> 
> pnv_pci_disable_tunnel()
>     Disable tunnel operations.
> 
> pnv_pci_set_tunnel_bar()
>     Tell kernel the Tunnel BAR Response address used by driver.
>     This function uses two new OPAL calls, as the PBCQ Tunnel BAR
>     register is configured by skiboot.
> 
> pnv_pci_get_as_notify_info()
>     Return the ASN info of the thread to be woken up.
> 
> Signed-off-by: Philippe Bergheaud <felix at linux.vnet.ibm.com>
> ---


Reviewed-by: Frederic Barrat <fbarrat at linux.vnet.ibm.com>


> Changelog:
> 
> v2: Do not set the ASN indication. Get it from the device tree.
> 
> v3: Make pnv_pci_get_phb_node() available when compiling without cxl.
> 
> v4: Add pnv_pci_get_as_notify_info().
>      Rebase opal call numbers on skiboot 5.9.6.
> 
> v5: pnv_pci_get_tunnel_ind():
>        - fix node reference count
>      pnv_pci_get_as_notify_info():
>        - fail if task == NULL
>        - read pid from mm->context.id
>        - explain that thread.tidr require CONFIG_PPC64
> 
> v6: pnv_pci_get_tunnel_ind():
>        - check if radix is enabled, or else return an error
>      pnv_pci_get_as_notify_info():
>        - remove a capi-specific comment, irrelevant for pci
> 
> v7: pnv_pci_set_tunnel_bar():
>        - setting the tunnel bar more than once with the same value
>          is not an error
> 
> v8: No change
> 
> v9: Rename pnv_pci_get_tunnel_ind() into pnv_pci_enable_tunnel():
>        - Increase real window size to accept as_notify messages.
>      New api pnv_pci_disable_tunnel():
>        - Restore real window size to its default value.
>      Adjust opal call numbers.
> 
> This patch depends on the following skiboot patches:
>    https://patchwork.ozlabs.org/patch/874415/
>    https://patchwork.ozlabs.org/patch/874416/
> ---
>   arch/powerpc/include/asm/opal-api.h            |   4 +-
>   arch/powerpc/include/asm/opal.h                |   2 +
>   arch/powerpc/include/asm/pnv-pci.h             |   6 ++
>   arch/powerpc/platforms/powernv/opal-wrappers.S |   2 +
>   arch/powerpc/platforms/powernv/pci-cxl.c       |   8 --
>   arch/powerpc/platforms/powernv/pci.c           | 135 +++++++++++++++++++++++++
>   6 files changed, 148 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
> index 94bd1bf2c873..07b5e2240ecc 100644
> --- a/arch/powerpc/include/asm/opal-api.h
> +++ b/arch/powerpc/include/asm/opal-api.h
> @@ -204,7 +204,9 @@
>   #define OPAL_NPU_SPA_SETUP			159
>   #define OPAL_NPU_SPA_CLEAR_CACHE		160
>   #define OPAL_NPU_TL_SET				161
> -#define OPAL_LAST				161
> +#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR		162
> +#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR		163
> +#define OPAL_LAST				163
> 
>   /* Device tree flags */
> 
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index 12e70fb58700..dde60089d0d4 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -204,6 +204,8 @@ int64_t opal_unregister_dump_region(uint32_t id);
>   int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
>   int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag);
>   int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
> +int64_t opal_pci_get_pbcq_tunnel_bar(uint64_t phb_id, uint64_t *addr);
> +int64_t opal_pci_set_pbcq_tunnel_bar(uint64_t phb_id, uint64_t addr);
>   int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg,
>   		uint64_t msg_len);
>   int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
> diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
> index 3e5cf251ad9a..d2d8c28db336 100644
> --- a/arch/powerpc/include/asm/pnv-pci.h
> +++ b/arch/powerpc/include/asm/pnv-pci.h
> @@ -29,6 +29,12 @@ extern int pnv_pci_set_power_state(uint64_t id, uint8_t state,
>   extern int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
>   			   u64 desc);
> 
> +extern int pnv_pci_enable_tunnel(struct pci_dev *dev, uint64_t *asnind);
> +extern int pnv_pci_disable_tunnel(struct pci_dev *dev);
> +extern int pnv_pci_set_tunnel_bar(struct pci_dev *dev, uint64_t addr,
> +				  int enable);
> +extern int pnv_pci_get_as_notify_info(struct task_struct *task, u32 *lpid,
> +				      u32 *pid, u32 *tid);
>   int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode);
>   int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
>   			   unsigned int virq);
> diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
> index 1b2936ba6040..3da30c2f26b4 100644
> --- a/arch/powerpc/platforms/powernv/opal-wrappers.S
> +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
> @@ -323,3 +323,5 @@ OPAL_CALL(opal_sensor_group_clear,		OPAL_SENSOR_GROUP_CLEAR);
>   OPAL_CALL(opal_npu_spa_setup,			OPAL_NPU_SPA_SETUP);
>   OPAL_CALL(opal_npu_spa_clear_cache,		OPAL_NPU_SPA_CLEAR_CACHE);
>   OPAL_CALL(opal_npu_tl_set,			OPAL_NPU_TL_SET);
> +OPAL_CALL(opal_pci_get_pbcq_tunnel_bar,		OPAL_PCI_GET_PBCQ_TUNNEL_BAR);
> +OPAL_CALL(opal_pci_set_pbcq_tunnel_bar,		OPAL_PCI_SET_PBCQ_TUNNEL_BAR);
> diff --git a/arch/powerpc/platforms/powernv/pci-cxl.c b/arch/powerpc/platforms/powernv/pci-cxl.c
> index 94498a04558b..cee003de63af 100644
> --- a/arch/powerpc/platforms/powernv/pci-cxl.c
> +++ b/arch/powerpc/platforms/powernv/pci-cxl.c
> @@ -16,14 +16,6 @@
> 
>   #include "pci.h"
> 
> -struct device_node *pnv_pci_get_phb_node(struct pci_dev *dev)
> -{
> -	struct pci_controller *hose = pci_bus_to_host(dev->bus);
> -
> -	return of_node_get(hose->dn);
> -}
> -EXPORT_SYMBOL(pnv_pci_get_phb_node);
> -
>   int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode)
>   {
>   	struct pci_controller *hose = pci_bus_to_host(dev->bus);
> diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
> index 69d102cbf48f..b265ecc0836a 100644
> --- a/arch/powerpc/platforms/powernv/pci.c
> +++ b/arch/powerpc/platforms/powernv/pci.c
> @@ -18,6 +18,7 @@
>   #include <linux/io.h>
>   #include <linux/msi.h>
>   #include <linux/iommu.h>
> +#include <linux/sched/mm.h>
> 
>   #include <asm/sections.h>
>   #include <asm/io.h>
> @@ -38,6 +39,7 @@
>   #include "pci.h"
> 
>   static DEFINE_MUTEX(p2p_mutex);
> +static DEFINE_MUTEX(tunnel_mutex);
> 
>   int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
>   {
> @@ -1092,6 +1094,139 @@ int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target, u64 desc)
>   }
>   EXPORT_SYMBOL_GPL(pnv_pci_set_p2p);
> 
> +struct device_node *pnv_pci_get_phb_node(struct pci_dev *dev)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(dev->bus);
> +
> +	return of_node_get(hose->dn);
> +}
> +EXPORT_SYMBOL(pnv_pci_get_phb_node);
> +
> +int pnv_pci_enable_tunnel(struct pci_dev *dev, u64 *asnind)
> +{
> +	struct device_node *np;
> +	const __be32 *prop;
> +	struct pnv_ioda_pe *pe;
> +	uint16_t window_id;
> +	int rc;
> +
> +	if (!radix_enabled())
> +		return -ENXIO;
> +
> +	if (!(np = pnv_pci_get_phb_node(dev)))
> +		return -ENXIO;
> +
> +	prop = of_get_property(np, "ibm,phb-indications", NULL);
> +	of_node_put(np);
> +
> +	if (!prop || !prop[1])
> +		return -ENXIO;
> +
> +	*asnind = (u64)be32_to_cpu(prop[1]);
> +	pe = pnv_ioda_get_pe(dev);
> +	if (!pe)
> +		return -ENODEV;
> +
> +	/* Increase real window size to accept as_notify messages. */
> +	window_id = (pe->pe_number << 1 ) + 1;
> +	rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, pe->pe_number,
> +					     window_id, pe->tce_bypass_base,
> +					     (uint64_t)1 << 48);
> +	return opal_error_code(rc);
> +}
> +EXPORT_SYMBOL_GPL(pnv_pci_enable_tunnel);
> +
> +int pnv_pci_disable_tunnel(struct pci_dev *dev)
> +{
> +	struct pnv_ioda_pe *pe;
> +
> +	pe = pnv_ioda_get_pe(dev);
> +	if (!pe)
> +		return -ENODEV;
> +
> +	/* Restore default real window size. */
> +	pnv_pci_ioda2_set_bypass(pe, true);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(pnv_pci_disable_tunnel);
> +
> +int pnv_pci_set_tunnel_bar(struct pci_dev *dev, u64 addr, int enable)
> +{
> +	__be64 val;
> +	struct pci_controller *hose;
> +	struct pnv_phb *phb;
> +	u64 tunnel_bar;
> +	int rc;
> +
> +	if (!opal_check_token(OPAL_PCI_GET_PBCQ_TUNNEL_BAR))
> +		return -ENXIO;
> +	if (!opal_check_token(OPAL_PCI_SET_PBCQ_TUNNEL_BAR))
> +		return -ENXIO;
> +
> +	hose = pci_bus_to_host(dev->bus);
> +	phb = hose->private_data;
> +
> +	mutex_lock(&tunnel_mutex);
> +	rc = opal_pci_get_pbcq_tunnel_bar(phb->opal_id, &val);
> +	if (rc != OPAL_SUCCESS) {
> +		rc = -EIO;
> +		goto out;
> +	}
> +	tunnel_bar = be64_to_cpu(val);
> +	if (enable) {
> +		/*
> +		* Only one device per PHB can use atomics.
> +		* Our policy is first-come, first-served.
> +		*/
> +		if (tunnel_bar) {
> +			if (tunnel_bar != addr)
> +				rc = -EBUSY;
> +			else
> +				rc = 0;	/* Setting same address twice is ok */
> +			goto out;
> +		}
> +	} else {
> +		/*
> +		* The device that owns atomics and wants to release
> +		* them must pass the same address with enable == 0.
> +		*/
> +		if (tunnel_bar != addr) {
> +			rc = -EPERM;
> +			goto out;
> +		}
> +		addr = 0x0ULL;
> +	}
> +	rc = opal_pci_set_pbcq_tunnel_bar(phb->opal_id, addr);
> +	rc = opal_error_code(rc);
> +out:
> +	mutex_unlock(&tunnel_mutex);
> +	return rc;
> +}
> +EXPORT_SYMBOL_GPL(pnv_pci_set_tunnel_bar);
> +
> +#ifdef CONFIG_PPC64	/* for thread.tidr */
> +int pnv_pci_get_as_notify_info(struct task_struct *task, u32 *lpid, u32 *pid,
> +			       u32 *tid)
> +{
> +	struct mm_struct *mm = NULL;
> +
> +	if (task == NULL)
> +		return -EINVAL;
> +
> +	mm = get_task_mm(task);
> +	if (mm == NULL)
> +		return -EINVAL;
> +
> +	*pid = mm->context.id;
> +	mmput(mm);
> +
> +	*tid = task->thread.tidr;
> +	*lpid = mfspr(SPRN_LPID);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(pnv_pci_get_as_notify_info);
> +#endif
> +
>   void pnv_pci_shutdown(void)
>   {
>   	struct pci_controller *hose;
> 



More information about the Linuxppc-dev mailing list