[PATCH v1 03/13] powerpc/mm/32s: rework mmu_mapin_ram()
Jonathan Neuschäfer
j.neuschaefer at gmx.net
Mon Dec 17 12:28:37 AEDT 2018
Hi, thanks for your reply.
On Thu, Dec 13, 2018 at 03:51:32PM +0100, Christophe Leroy wrote:
> Hi Again,
>
> Le 13/12/2018 à 13:16, Christophe Leroy a écrit :
[...]
> > Can you tell/provide the .config and dts used ?
I'm using wii.dts and almost the wii_defconfig from my tree (save-
defconfig result is attached), which is 4.20-rc5 plus a few patches:
https://github.com/neuschaefer/linux wii-4.20-rc5 (w/o your patches)
https://github.com/neuschaefer/linux wii-4.20-rc5-ppcbat (w/ your patches 1-3)
> > You seem to have 319MB RAM wherease arch/powerpc/boot/dts/wii.dts only
> > has 88MB Memory:
> >
> > memory {
> > device_type = "memory";
> > reg = <0x00000000 0x01800000 /* MEM1 24MB 1T-SRAM */
> > 0x10000000 0x04000000>; /* MEM2 64MB GDDR3 */
> > };
This is, I think, because something marks all the address space from 0
to the end of MEM2 as RAM, and then cuts out a hole in the middle. I'm
not sure about the exact mechanism.
Unfortunately this hole has to be treated carefully because it contains
MMIO devices.
> Putting the same description in my mpc832x board DTS and doing a few hacks
> to get the WII functions called, I get the following:
>
> [ 0.000000] Top of RAM: 0x14000000, Total RAM: 0x5800000
> [ 0.000000] Memory hole size: 232MB
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000000000-0x0000000013ffffff]
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000017fffff]
> [ 0.000000] node 0: [mem 0x0000000010000000-0x0000000013ffffff]
> [ 0.000000] Initmem setup node 0 [mem
> 0x0000000000000000-0x0000000013ffffff]
> [ 0.000000] On node 0 totalpages: 22528
> [ 0.000000] DMA zone: 640 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 22528 pages, LIFO batch:3
> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> [ 0.000000] pcpu-alloc: [0] 0
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 21888
> [ 0.000000] Kernel command line: loglevel=7
> ip=192.168.2.5:192.168.2.2::255.0
> [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
> bytes)
> [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> [ 0.000000] Memory: 77060K/90112K available (6548K kernel code, 1156K
> rwdata,
> [ 0.000000] Kernel virtual memory layout:
> [ 0.000000] * 0xfffdf000..0xfffff000 : fixmap
> [ 0.000000] * 0xfdffd000..0xfe000000 : early ioremap
> [ 0.000000] * 0xd5000000..0xfdffd000 : vmalloc & ioremap
>
>
>
>
> root at vgoippro:~# cat /sys/kernel/debug/powerpc/block_address_translation
> ---[ Instruction Block Address Translation ]---
> 0: 0xc0000000-0xc0ffffff 0x00000000 Kernel EXEC coherent
> 1: -
> 2: 0xc1000000-0xc17fffff 0x01000000 Kernel EXEC coherent
> 3: -
> 4: 0xd0000000-0xd3ffffff 0x10000000 Kernel EXEC coherent
> 5: -
> 6: -
> 7: -
>
> ---[ Data Block Address Translation ]---
> 0: 0xc0000000-0xc0ffffff 0x00000000 Kernel RW coherent
> 1: 0xfffe0000-0xffffffff 0x0d000000 Kernel RW no cache guarded
> 2: 0xc1000000-0xc17fffff 0x01000000 Kernel RW coherent
> 3: -
> 4: 0xd0000000-0xd3ffffff 0x10000000 Kernel RW coherent
> 5: -
> 6: -
> 7: -
>
>
> Could you please provide the dmesg and
> /sys/kernel/debug/powerpc/block_address_translation from before this patch,
> so that we can compare and identify the differences if any ?
After applying the patch that adds this debugfs file and enabling
CONFIG_PPC_PTDUMP, I get this:
# cat /sys/kernel/debug/powerpc/block_address_translation
---[ Instruction Block Address Translation ]---
0: -
1: -
2: 0xc0000000-0xc0ffffff 0x00000000 Kernel EXEC
3: 0xc1000000-0xc17fffff 0x01000000 Kernel EXEC
4: 0xd0000000-0xd1ffffff 0x10000000 Kernel EXEC
5: -
6: -
7: -
---[ Data Block Address Translation ]---
0: -
1: 0xfffe0000-0xffffffff 0x0d000000 Kernel RW no cache guarded
2: 0xc0000000-0xc0ffffff 0x00000000 Kernel RW
3: 0xc1000000-0xc17fffff 0x01000000 Kernel RW
4: 0xd0000000-0xd1ffffff 0x10000000 Kernel RW
5: -
6: -
7: -
dmesg is attached.
I added some tracing to the setbat function:
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index f6f575bae3bc..4da3dc54fe46 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -120,6 +120,9 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys,
struct ppc_bat *bat = BATS[index];
unsigned long flags = pgprot_val(prot);
+ pr_info("setbat(%u, %px, %px, %px, %lx)\n",
+ index, (void *)virt, (void *)phys, (void *)size, flags);
+
if ((flags & _PAGE_NO_CACHE) ||
(cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0))
flags &= ~_PAGE_COHERENT;
And here's what I got:
Before your patches (circa v4.20-rc5):
[ 0.000000] setbat(2, c0000000, 00000000, 01000000, 591)
[ 0.000000] setbat(3, c1000000, 01000000, 00800000, 591)
[ 0.000000] setbat(4, d0000000, 10000000, 02000000, 591)
With patches 1-3:
[ 0.000000] setbat(0, c0000000, 00000000, 01000000, 311)
[ 0.000000] setbat(2, c1000000, 01000000, 00800000, 311)
[ 0.000000] setbat(4, d0000000, 10000000, 02000000, 791)
According to arch/powerpc/include/asm/book3s/32/hash.h,
- 0x591 = _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | _PAGE_PRESENT
- 0x311 = _PAGE_EXEC | _PAGE_ACCESSED | _PAGE_COHERENT | _PAGE_PRESENT
- 0x791 = _PAGE_RW | _PAGE_EXEC | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | _PAGE_PRESENT
Changing the flags back to 0x591 in setbat doesn't result in a booting
system.
> > > I've tested at patch 1, 2, 3, 4, and 13, so I don't know if it works
> > > somewhere in the middle, but probably not.
(I get the same results if I also merge powerpc/next, btw)
I hope this helps somewhat,
Jonathan Neuschäfer
-------------- next part --------------
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] Total memory = 319MB; using 1024kB for hash table (at (ptrval))
[ 0.000000] Linux version 4.20.0-rc5-wii-00021-g15eb67569a3d (jn at longitude) (gcc version 8.2.0 (Debian 8.2.0-9)) #1337 PREEMPT Sun Dec 16 02:37:19 CET 2018
[ 0.000000] Using wii machine description
[ 0.000000] -----------------------------------------------------
[ 0.000000] Hash_size = 0x100000
[ 0.000000] phys_mem_size = 0x5700000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000000401a008
[ 0.000000] possible = 0x000000002f7ff049
[ 0.000000] always = 0x0000000000000000
[ 0.000000] cpu_user_features = 0x8c000001 0x00000000
[ 0.000000] mmu_features = 0x00010001
[ 0.000000] Hash = 0x(ptrval)
[ 0.000000] Hash_mask = 0x3fff
[ 0.000000] -----------------------------------------------------
[ 0.000000] wii: hw_ctrl at 0x0d800100 mapped to 0x(ptrval)
[ 0.000000] wii: hw_gpio at 0x0d8000c0 mapped to 0x(ptrval)
[ 0.000000] Top of RAM: 0x13f00000, Total RAM: 0x5700000
[ 0.000000] Memory hole size: 232MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000013efffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000017fffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x0000000013efffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000013efffff]
[ 0.000000] On node 0 totalpages: 22272
[ 0.000000] DMA zone: 638 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 22272 pages, LIFO batch:3
[ 0.000000] random: get_random_u32 called from start_kernel+0x84/0x438 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 21634
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=usbgecko1
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 73016K/89088K available (7084K kernel code, 512K rwdata, 1796K rodata, 2724K init, 158K bss, 16072K reserved, 0K cma-reserved)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffdf000..0xfffff000 : fixmap
[ 0.000000] * 0xfde00000..0xfe000000 : consistent mem
[ 0.000000] * 0xfddfe000..0xfde00000 : early ioremap
[ 0.000000] * 0xd4000000..0xfddfe000 : vmalloc & ioremap
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] flipper-pic: controller at 0x0c003000 mapped to 0x(ptrval)
[ 0.000000] hlwd-pic: controller at 0x0d800030 mapped to 0x(ptrval)
[ 0.000000] time_init: decrementer frequency = 60.750000 MHz
[ 0.000000] time_init: processor frequency = 729.000000 MHz
[ 0.000012] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x1c0588ffb6, max_idle_ns: 881590404504 ns
[ 0.004906] clocksource: timebase mult[83afef2] shift[23] registered
[ 0.007920] clockevent: decrementer mult[f8d4fdf] shift[32] cpu[0]
[ 0.011235] Console: colour dummy device 80x25
[ 0.013381] pid_max: default: 32768 minimum: 301
[ 0.015704] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.018862] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.023818] rcu: Hierarchical SRCU implementation.
[ 0.026863] devtmpfs: initialized
[ 0.057205] DMA-API: preallocated 65536 debug entries
[ 0.059600] DMA-API: debugging enabled by kernel config
[ 0.062146] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.066813] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.070472] NET: Registered protocol family 16
[ 0.074531] exi: Nintendo GameCube/Wii EXternal Interface (EXI) driver - version 4.0i
[ 0.079457] exi: about to add [exi0:0] id=0xfffffffe (external card)
[ 0.082855] exi: add completed
[ 0.084329] exi: about to add [exi0:1] id=0xfffff308 Wii Mask ROM/RTC/SRAM/UART
[ 0.088140] exi: add completed
[ 0.129762] SCSI subsystem initialized
[ 0.131853] Advanced Linux Sound Architecture Driver Initialized.
[ 0.138423] Bluetooth: Core ver 2.22
[ 0.140835] NET: Registered protocol family 31
[ 0.142944] Bluetooth: HCI device and connection manager initialized
[ 0.146378] Bluetooth: HCI socket layer initialized
[ 0.148693] Bluetooth: L2CAP socket layer initialized
[ 0.151303] Bluetooth: SCO socket layer initialized
[ 0.153707] clocksource: Switched to clocksource timebase
[ 0.236624] NET: Registered protocol family 2
[ 0.239818] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 6144 bytes)
[ 0.243850] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.247389] TCP bind hash table entries: 1024 (order: 2, 20480 bytes)
[ 0.250658] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.253850] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.256758] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.260147] NET: Registered protocol family 1
[ 0.262867] RPC: Registered named UNIX socket transport module.
[ 0.265675] RPC: Registered udp transport module.
[ 0.267974] RPC: Registered tcp transport module.
[ 0.270219] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.584441] Initialise system trusted keyrings
[ 0.588214] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.682925] Key type asymmetric registered
[ 0.684871] Asymmetric key parser 'x509' registered
[ 0.687476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.691178] io scheduler noop registered
[ 0.693039] io scheduler deadline registered
[ 0.695278] io scheduler cfq registered (default)
[ 0.697511] io scheduler mq-deadline registered
[ 0.699746] io scheduler kyber registered
[ 0.755731] usbgecko: Console and TTY driver for the USB Gecko adapter - version 0.1i
[ 0.760106] usbgecko: USB Gecko detected in memcard slot-A
[ 1.341534] printk: console [usbgecko0] enabled
[ 1.346940] Generic non-volatile memory driver v1.1
[ 1.354626] brd: module loaded
[ 1.372181] loop: module loaded
[ 1.376667] Broadcom 43xx driver loaded [ Features: NS ]
[ 1.383138] i2c /dev entries driver
[ 1.388232] sdhci: Secure Digital Host Controller Interface driver
[ 1.395102] sdhci: Copyright(c) Pierre Ossman
[ 1.399557] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.405551] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.437737] mmc0: SDHCI controller on d070000.sd [d070000.sd] using DMA
[ 1.444910] mmc1 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.477741] mmc1: SDHCI controller on d080000.sdio [d080000.sdio] using DMA
[ 1.488556] NET: Registered protocol family 17
[ 1.500457] Bluetooth: RFCOMM socket layer initialized
[ 1.506001] Bluetooth: RFCOMM ver 1.11
[ 1.510150] mmc0: new high speed SDHC card at address 1234
[ 1.515730] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.523394] mmcblk0: mmc0:1234 SA32G 28.9 GiB
[ 1.527978] Bluetooth: BNEP filters: multicast
[ 1.533692] Bluetooth: BNEP socket layer initialized
[ 1.539240] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.545434] mmcblk0: p1
[ 1.548923] Bluetooth: HIDP socket layer initialized
[ 1.555729] drmem: No dynamic reconfiguration memory found
[ 1.563332] Loading compiled-in X.509 certificates
[ 1.568179] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.575175] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.583075] hctosys: unable to open rtc device (rtc0)
[ 1.588566] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[ 1.594391] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.603328] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.614717] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[ 1.624477] random: fast init done
[ 1.632755] mmc1: queuing unknown CIS tuple 0x80 (10 bytes)
[ 1.643310] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.650089] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.655619] ALSA device list:
[ 1.658623] No soundcards found.
[ 1.662253] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.674115] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[ 1.680759] Freeing unused kernel memory: 2724K
[ 1.685600] mmc1: queuing unknown CIS tuple 0x80 (4 bytes)
[ 1.691121] This architecture does not have kernel memory protection.
[ 1.697611] mmc1: new SDIO card at address 0001
[ 1.702178] Run /init as init process
[ 1.706477] b43-sdio mmc1:0001:1: Chip ID 14e4:4318
[ 1.716390] ssb: Found chip with id 0x4710, rev 0x00 and package 0x00
[ 1.736283] ssb: WARNING: Multiple ChipCommon found
[ 1.750060] b43-phy0: Broadcom 4710 WLAN found (core revision 9)
[ 1.768026] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.785099] cfg80211: failed to load regulatory.db
[ 1.794322] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[ 1.806215] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0
[ 1.878936] b43-sdio mmc1:0001:1: Sonics Silicon Backplane found on SDIO device mmc1:0001:1
[ 1.907732] udevd[615]: starting version 3.2.5
[ 1.921820] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 1.937066] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.945644] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.952679] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.974388] udevd[616]: starting eudev-3.2.5
[ 3.055809] random: dd: uninitialized urandom read (512 bytes read)
-------------- next part --------------
CONFIG_LOCALVERSION="-wii"
CONFIG_SYSVIPC=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="/home/jn/dev/linux/gc-linux/buildroot/images/rootfs.cpio"
CONFIG_EXPERT=y
# CONFIG_ELF_CORE is not set
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_WII=y
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_KEXEC=y
# CONFIG_SECCOMP is not set
CONFIG_ADVANCED_OPTIONS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_HIDP=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_ETHERNET is not set
CONFIG_B43=y
CONFIG_B43_BUSES_SSB=y
CONFIG_B43_SDIO=y
# CONFIG_B43_PHY_LP is not set
CONFIG_B43_DEBUG=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_SERIAL_USBGECKO=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_HLWD=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_HID_APPLE=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_HLWD=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_GENERIC=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DMA_API_DEBUG=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_PTDUMP=y
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20181217/38f5e342/attachment.sig>
More information about the Linuxppc-dev
mailing list