[PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]

[Leon Romanovsky]

On Thu, Dec 06, 2018 at 03:19:51PM +1100, David Gibson wrote:
> Mellanox ConnectX-5 IB cards (MT27800) seem to cause a call trace when
> unbound from their regular driver and attached to vfio-pci in order to pass
> them through to a guest.
>
> This goes away if the disable_idle_d3 option is used, so it looks like a
> problem with the hardware handling D3 state.  To fix that more permanently,
> use a device quirk to disable D3 state for these devices.
>
> We do this by renaming the existing quirk_no_ata_d3() more generally and
> attaching it to the ConnectX-[45] devices (0x15b3:0x1013).
>
> Signed-off-by: David Gibson <david at gibson.dropbear.id.au>
> ---
>  drivers/pci/quirks.c | 17 +++++++++++------
>  1 file changed, 11 insertions(+), 6 deletions(-)
>

Hi David,

Thank for your patch,

I would like to reproduce the calltrace before moving forward,
but have trouble to reproduce the original issue.

I'm working with vfio-pci and CX-4/5 cards on daily basis,
tried manually enter into D3 state now, and it worked for me.

Can you please post your full calltrace, and "lspci -s PCI_ID -vv"
output?

Thanks
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20181206/a6f012c9/attachment.sig>