[v11 6/7] arm64: dts: ls1046a: add qdma device tree nodes

[Shawn Guo]

On Tue, Oct 30, 2018 at 10:36:03AM +0800, Peng Ma wrote:
> add the qDMA device tree nodes for LS1046A devices.
> 
> Signed-off-by: Wen He <wen.he_1 at nxp.com>
> Signed-off-by: Peng Ma <peng.ma at nxp.com>
> ---
> change in v11:
> 	- no
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi |   21 +++++++++++++++++++++
>  1 files changed, 21 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index ef83786..dc65318 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -704,6 +704,27 @@
>  					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		qdma: dma-controller at 8380000 {
> +			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
> +			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
> +			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
> +			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
> +			interrupts = <0 153 0x4>,
> +				     <0 39 0x4>,
> +				     <0 40 0x4>,
> +				     <0 41 0x4>,
> +				     <0 42 0x4>;

Use GIC_SPI and IRQ_TYPE_xxx defines.

Shawn

> +			interrupt-names = "qdma-error", "qdma-queue0",
> +				"qdma-queue1", "qdma-queue2", "qdma-queue3";
> +			dma-channels = <8>;
> +			block-number = <1>;
> +			block-offset = <0x10000>;
> +			fsl,dma-queues = <2>;
> +			status-sizes = <64>;
> +			queue-sizes = <64 64>;
> +			big-endian;
> +		};
> +
>  	};
>  
>  	reserved-memory {
> -- 
> 1.7.1
>