[PATCH 3/5] drivers: clk-qoriq: Add clockgen support for lx2160a

Vabhav Sharma vabhav.sharma at nxp.com
Thu Aug 30 17:36:48 AEST 2018



> -----Original Message-----
> From: linux-kernel-owner at vger.kernel.org <linux-kernel-
> owner at vger.kernel.org> On Behalf Of Scott Wood
> Sent: Wednesday, August 29, 2018 5:49 AM
> To: Vabhav Sharma <vabhav.sharma at nxp.com>; linux-
> kernel at vger.kernel.org; devicetree at vger.kernel.org; robh+dt at kernel.org;
> mark.rutland at arm.com; linuxppc-dev at lists.ozlabs.org; linux-arm-
> kernel at lists.infradead.org; mturquette at baylibre.com; sboyd at kernel.org;
> rjw at rjwysocki.net; viresh.kumar at linaro.org; linux-clk at vger.kernel.org;
> linux-pm at vger.kernel.org; linux-kernel-owner at vger.kernel.org;
> catalin.marinas at arm.com; will.deacon at arm.com;
> gregkh at linuxfoundation.org; arnd at arndb.de;
> kstewart at linuxfoundation.org; yamada.masahiro at socionext.com
> Cc: Yogesh Narayan Gaur <yogeshnarayan.gaur at nxp.com>; Andy Tang
> <andy.tang at nxp.com>; Udit Kumar <udit.kumar at nxp.com>;
> linux at armlinux.org.uk; Varun Sethi <V.Sethi at nxp.com>
> Subject: Re: [PATCH 3/5] drivers: clk-qoriq: Add clockgen support for lx2160a
> 
> On Mon, 2018-08-20 at 12:17 +0530, Vabhav Sharma wrote:
> > From: Yogesh Gaur <yogeshnarayan.gaur at nxp.com>
> >
> > Add clockgen support for lx2160a.
> > Added entry for compat 'fsl,lx2160a-clockgen'.
> > As LX2160A is 16 core, so modified value for NUM_CMUX
> >
> > Signed-off-by: Tang Yuantian <andy.tang at nxp.com>
> > Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur at nxp.com>
> > Signed-off-by: Vabhav Sharma <vabhav.sharma at nxp.com>
> > ---
> >  drivers/clk/clk-qoriq.c         | 14 +++++++++++++-
> >  drivers/cpufreq/qoriq-cpufreq.c |  1 +
> >  2 files changed, 14 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index
> > 3a1812f..fc6e308 100644
> > --- a/drivers/clk/clk-qoriq.c
> > +++ b/drivers/clk/clk-qoriq.c
> > @@ -60,7 +60,7 @@ struct clockgen_muxinfo {  };
> >
> >  #define NUM_HWACCEL	5
> > -#define NUM_CMUX	8
> > +#define NUM_CMUX	16
> >
> >  struct clockgen;
> >
> > @@ -570,6 +570,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
> >  		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
> >  	},
> >  	{
> > +		.compat = "fsl,lx2160a-clockgen",
> > +		.cmux_groups = {
> > +			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
> > +		},
> > +		.cmux_to_group = {
> > +			0, 0, 0, 0, 1, 1, 1, 1, -1
> > +		},
> > +		.pll_mask = 0x37,
> > +		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
> > +	},
> 
> Why are you increasing NUM_CMUX beyond 8 for a chip that only has 8
> entries in cmux_to_group?
Configuration is 16 cores,8 cluster with 2 cores in each cluster
> 
> -Scott



More information about the Linuxppc-dev mailing list