[PATCH 4/5] arm64: dts: add QorIQ LX2160A SoC support
Vabhav Sharma
vabhav.sharma at nxp.com
Mon Aug 20 16:47:15 AEST 2018
LX2160A SoC is based on Layerscape Chassis Generation 3.2 Architecture.
LX2160A features an advanced 16 64-bit ARM v8 CortexA72 processor cores
in 8 cluster, CCN508, GICv3,two 64-bit DDR4 memory controller, 8 I2C
controllers, 3 dspi, 2 esdhc,2 USB 3.0, mmu 500, 3 SATA, 4 PL011 SBSA
UARTs etc.
Signed-off-by: Ramneek Mehresh <ramneek.mehresh at nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455 at nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta at nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur at nxp.com>
Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma at nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 572 +++++++++++++++++++++++++
1 file changed, 572 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
new file mode 100644
index 0000000..e35e494
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -0,0 +1,572 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree Include file for Layerscape-LX2160A family SoC.
+//
+// Copyright 2018 NXP
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ compatible = "fsl,lx2160a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ // 8 clusters having 2 Cortex-A72 cores each
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ };
+
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ };
+
+ cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x100>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ };
+
+ cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x101>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ };
+
+ cpu at 200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x200>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ };
+
+ cpu at 201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x201>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ };
+
+ cpu at 300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x300>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ };
+
+ cpu at 301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x301>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ };
+
+ cpu at 400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x400>;
+ clocks = <&clockgen 1 4>;
+ next-level-cache = <&cluster4_l2>;
+ };
+
+ cpu at 401 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x401>;
+ clocks = <&clockgen 1 4>;
+ next-level-cache = <&cluster4_l2>;
+ };
+
+ cpu at 500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x500>;
+ clocks = <&clockgen 1 5>;
+ next-level-cache = <&cluster5_l2>;
+ };
+
+ cpu at 501 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x501>;
+ clocks = <&clockgen 1 5>;
+ next-level-cache = <&cluster5_l2>;
+ };
+
+ cpu at 600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x600>;
+ clocks = <&clockgen 1 6>;
+ next-level-cache = <&cluster6_l2>;
+ };
+
+ cpu at 601 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x601>;
+ clocks = <&clockgen 1 6>;
+ next-level-cache = <&cluster6_l2>;
+ };
+
+ cpu at 700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x700>;
+ clocks = <&clockgen 1 7>;
+ next-level-cache = <&cluster7_l2>;
+ };
+
+ cpu at 701 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x701>;
+ clocks = <&clockgen 1 7>;
+ next-level-cache = <&cluster7_l2>;
+ };
+
+ cluster0_l2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ cluster1_l2: l2-cache1 {
+ compatible = "cache";
+ };
+
+ cluster2_l2: l2-cache2 {
+ compatible = "cache";
+ };
+
+ cluster3_l2: l2-cache3 {
+ compatible = "cache";
+ };
+
+ cluster4_l2: l2-cache4 {
+ compatible = "cache";
+ };
+
+ cluster5_l2: l2-cache5 {
+ compatible = "cache";
+ };
+
+ cluster6_l2: l2-cache6 {
+ compatible = "cache";
+ };
+
+ cluster7_l2: l2-cache7 {
+ compatible = "cache";
+ };
+ };
+
+ gic: interrupt-controller at 6000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x06000000 0 0x10000>, // GIC Dist
+ <0x0 0x06200000 0 0x200000>, // GICR (RD_base +
+ // SGI_base)
+ <0x0 0x0c0c0000 0 0x2000>, // GICC
+ <0x0 0x0c0d0000 0 0x1000>, // GICH
+ <0x0 0x0c0e0000 0 0x20000>; // GICV
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ interrupts = <1 9 0x4>;
+
+ its: gic-its at 6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x6020000 0 0x20000>;
+ };
+ };
+
+ rstcr: syscon at 1e60000 {
+ compatible = "syscon";
+ reg = <0x0 0x1e60000 0x0 0x4>;
+ };
+
+ reboot {
+ compatible ="syscon-reboot";
+ regmap = <&rstcr>;
+ offset = <0x0>;
+ mask = <0x2>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 4>, // Physical Secure PPI, active-low
+ <1 14 4>, // Physical Non-Secure PPI, active-low
+ <1 11 4>, // Virtual PPI, active-low
+ <1 10 4>; // Hypervisor PPI, active-low
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 7 0x8>; // PMU PPI, Level low type
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ memory at 80000000 {
+ // DRAM space - 1, size : 2 GB DRAM
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ };
+
+ ddr1: memory-controller at 1080000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1080000 0x0 0x1000>;
+ interrupts = <0 17 0x4>;
+ little-endian;
+ };
+
+ ddr2: memory-controller at 1090000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1090000 0x0 0x1000>;
+ interrupts = <0 18 0x4>;
+ little-endian;
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking at 1300000 {
+ compatible = "fsl,lx2160a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ crypto: crypto at 8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ status = "disabled";
+
+ sec_jr0: jr at 10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr at 20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr at 30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr at 40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ dcfg: dcfg at 1e00000 {
+ compatible = "fsl,lx2160a-dcfg", "syscon";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ little-endian;
+ };
+
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; // Level high type
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; // Level high type
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; // Level high type
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio at 2330000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; // Level high type
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+
+ i2c0: i2c at 2000000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ fsl-scl-gpio = <&gpio2 15 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 2010000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 2020000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at 2030000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at 2040000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2040000 0x0 0x10000>;
+ interrupts = <0 74 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ fsl-scl-gpio = <&gpio2 16 0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at 2050000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2050000 0x0 0x10000>;
+ interrupts = <0 74 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at 2060000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2060000 0x0 0x10000>;
+ interrupts = <0 75 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ status = "disabled";
+ };
+
+ i2c7: i2c at 2070000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2070000 0x0 0x10000>;
+ interrupts = <0 75 0x4>; // Level high type
+ clock-names = "i2c";
+ clocks = <&clockgen 4 7>;
+ status = "disabled";
+ };
+
+ uart0: serial at 21c0000 {
+ device_type = "serial";
+ compatible = "arm,pl011","arm,sbsa-uart";
+ reg = <0x0 0x21c0000 0x0 0x1000>;
+ interrupts = <0 32 0x4>; // Level high type
+ current-speed = <115200>;
+ status = "disabled";
+ };
+
+ uart1: serial at 21d0000 {
+ device_type = "serial";
+ compatible = "arm,pl011","arm,sbsa-uart";
+ reg = <0x0 0x21d0000 0x0 0x1000>;
+ interrupts = <0 33 0x4>; // Level high type
+ current-speed = <115200>;
+ status = "disabled";
+ };
+
+ uart2: serial at 21e0000 {
+ device_type = "serial";
+ compatible = "arm,pl011","arm,sbsa-uart";
+ reg = <0x0 0x21e0000 0x0 0x1000>;
+ interrupts = <0 72 0x4>; // Level high type
+ current-speed = <115200>;
+ status = "disabled";
+ };
+
+ uart3: serial at 21f0000 {
+ device_type = "serial";
+ compatible = "arm,pl011","arm,sbsa-uart";
+ reg = <0x0 0x21f0000 0x0 0x1000>;
+ interrupts = <0 73 0x4>; // Level high type
+ current-speed = <115200>;
+ status = "disabled";
+ };
+
+ smmu: iommu at 5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #iommu-cells = <1>;
+ #global-interrupts = <14>;
+ interrupts = <0 13 4>, // global secure fault
+ <0 14 4>, // combined secure interrupt
+ <0 15 4>, // global non-secure fault
+ <0 16 4>, // combined non-secure interrupt
+ // performance counter interrupts 0-9
+ <0 211 4>, <0 212 4>,
+ <0 213 4>, <0 214 4>,
+ <0 215 4>, <0 216 4>,
+ <0 217 4>, <0 218 4>,
+ <0 219 4>, <0 220 4>,
+ // per context interrupt, 64 interrupts
+ <0 146 4>, <0 147 4>,
+ <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>,
+ <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>,
+ <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>,
+ <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>,
+ <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>,
+ <0 168 4>, <0 169 4>,
+ <0 170 4>, <0 171 4>,
+ <0 172 4>, <0 173 4>,
+ <0 174 4>, <0 175 4>,
+ <0 176 4>, <0 177 4>,
+ <0 178 4>, <0 179 4>,
+ <0 180 4>, <0 181 4>,
+ <0 182 4>, <0 183 4>,
+ <0 184 4>, <0 185 4>,
+ <0 186 4>, <0 187 4>,
+ <0 188 4>, <0 189 4>,
+ <0 190 4>, <0 191 4>,
+ <0 192 4>, <0 193 4>,
+ <0 194 4>, <0 195 4>,
+ <0 196 4>, <0 197 4>,
+ <0 198 4>, <0 199 4>,
+ <0 200 4>, <0 201 4>,
+ <0 202 4>, <0 203 4>,
+ <0 204 4>, <0 205 4>,
+ <0 206 4>, <0 207 4>,
+ <0 208 4>, <0 209 4>;
+ dma-coherent;
+ };
+
+ usb0: usb3 at 3100000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; // Level high type
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb1: usb3 at 3110000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; // Level high type
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ watchdog at 23a0000 {
+ compatible = "arm,sbsa-gwdt";
+ reg = <0x0 0x23a0000 0 0x1000>,
+ <0x0 0x2390000 0 0x1000>;
+ interrupts = <0 59 4>;
+ timeout-sec = <30>;
+ };
+
+ };
+};
--
2.7.4
More information about the Linuxppc-dev
mailing list