[PATCH v1 1/1] misc: IBM Virtual Management Channel Driver
Bryant G. Ly
bryantly at linux.vnet.ibm.com
Tue Apr 24 00:46:52 AEST 2018
This driver is a logical device which provides an
interface between the hypervisor and a management
partition.
This driver is to be used for the POWER Virtual
Management Channel Virtual Adapter on the PowerVM
platform. It provides both request/response and
async message support through the /dev/ibmvmc node.
Signed-off-by: Bryant G. Ly <bryantly at linux.vnet.ibm.com>
Reviewed-by: Steven Royer <seroyer at linux.vnet.ibm.com>
Reviewed-by: Adam Reznechek <adreznec at linux.vnet.ibm.com>
Tested-by: Taylor Jakobson <tjakobs at us.ibm.com>
Tested-by: Brad Warrum <bwarrum at us.ibm.com>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Michael Ellerman <mpe at ellerman.id.au>
---
Documentation/ioctl/ioctl-number.txt | 1 +
Documentation/misc-devices/ibmvmc.txt | 161 +++
MAINTAINERS | 6 +
arch/powerpc/include/asm/hvcall.h | 1 +
drivers/misc/Kconfig | 14 +
drivers/misc/Makefile | 1 +
drivers/misc/ibmvmc.c | 2415 +++++++++++++++++++++++++++++++++
drivers/misc/ibmvmc.h | 209 +++
8 files changed, 2808 insertions(+)
create mode 100644 Documentation/misc-devices/ibmvmc.txt
create mode 100644 drivers/misc/ibmvmc.c
create mode 100644 drivers/misc/ibmvmc.h
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 84bb74d..9851cee 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -329,6 +329,7 @@ Code Seq#(hex) Include File Comments
0xCA 80-BF uapi/scsi/cxlflash_ioctl.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein at puffin.lb.shuttle.de>
+0xCC 00-0F drivers/misc/ibmvmc.h pseries VMC driver
0xCD 01 linux/reiserfs_fs.h
0xCF 02 fs/cifs/ioctl.c
0xDB 00-0F drivers/char/mwave/mwavepub.h
diff --git a/Documentation/misc-devices/ibmvmc.txt b/Documentation/misc-devices/ibmvmc.txt
new file mode 100644
index 0000000..bae1064
--- /dev/null
+++ b/Documentation/misc-devices/ibmvmc.txt
@@ -0,0 +1,161 @@
+Kernel Driver ibmvmc
+====================
+
+Authors:
+ Dave Engebretsen <engebret at us.ibm.com>
+ Adam Reznechek <adreznec at linux.vnet.ibm.com>
+ Steven Royer <seroyer at linux.vnet.ibm.com>
+ Bryant G. Ly <bryantly at linux.vnet.ibm.com>
+
+Description
+===========
+
+The Virtual Management Channel (VMC) is a logical device which provides an
+interface between the hypervisor and a management partition. This
+management partition is intended to provide an alternative to HMC-based
+system management. In the management partition, a Novalink application
+exists which enables a system administrator to configure the system’s
+partitioning characteristics via a command line interface (CLI) or
+Representational State Transfer Application (REST). You can also manage the
+server by using PowerVC or other OpenStack solution. Support for
+conventional HMC management of the system may still be provided on a
+system; however, when an HMC is attached to the system, the VMC
+interface is disabled by the hypervisor.
+
+NovaLink runs on a Linux logical partition on a POWER8 or newer processor-
+based server that is virtualized by PowerVM. System configuration,
+maintenance, and control functions which traditionally require an HMC can
+be implemented in the Novalink using a combination of HMC to hypervisor
+interfaces and existing operating system methods. This tool provides a
+subset of the functions implemented by the HMC and enables basic partition
+configuration. The set of HMC to hypervisor messages supported by the
+Novalink component are passed to the hypervisor over a VMC interface, which
+is defined below.
+
+Virtual Management Channel (VMC)
+A logical device, called the virtual management channel (VMC), is defined
+for communicating between the Novalink application and the hypervisor.
+This device, similar to a VSCSI server device, is presented to a designated
+management partition as a virtual device and is only presented when the
+system is not HMC managed.
+This communication device borrows aspects from both VSCSI and ILLAN devices
+and is implemented using the CRQ and the RDMA interfaces. A three-way
+handshake is defined that must take place to establish that both the
+hypervisor and management partition sides of the channel are running prior
+to sending/receiving any of the protocol messages.
+This driver also utilizes Transport Event CRQs. CRQ messages that are sent
+when the hypervisor detects one of the peer partitions has abnormally
+terminated, or one side has called H_FREE_CRQ to close their CRQ.
+Two new classes of CRQ messages are introduced for the VMC device. VMC
+Administrative messages are used for each partition using the VMC to
+communicate capabilities to their partner. HMC Interface messages are used
+for the actual flow of HMC messages between the management partition and
+the hypervisor. As most HMC messages far exceed the size of a CRQ bugger,
+a virtual DMA (RMDA) of the HMC message data is done prior to each HMC
+Interface CRQ message. Only the management partition drives RDMA
+operations; hypervisors never directly causes the movement of message data.
+
+Example Management Partition VMC Driver Interface
+=================================================
+This section provides an example for the Novalink implementation where a
+device driver is used to interface to the VMC device. This driver
+consists of a new device, for example /dev/lparvmc, which provides
+interfaces to open, close, read, write, and perform ioctl’s against the
+VMC device.
+
+VMC Interface Initialization
+The device driver is responsible for initializing the VMC when the driver
+is loaded. It first creates and initializes the CRQ. Next, an exchange of
+VMC capabilities is performed to indicate the code version and number of
+resources available in both the management partition and the hypervisor.
+Finally, the hypervisor requests that the management partition create an
+initial pool of VMC buffers, one buffer for each possible HMC connection,
+which will be used for Novalink session initialization. Prior to completion
+of this initialization sequence, the device returns EBUSY to open() calls.
+EIO is returned for all open() failures.
+
+Management Partition Hypervisor
+ CRQ INIT
+---------------------------------------->
+ CRQ INIT COMPLETE
+<----------------------------------------
+ CAPABILITIES
+---------------------------------------->
+ CAPABILITIES RESPONSE
+<----------------------------------------
+ ADD BUFFER (MHC IDX=0,1,..) _
+<---------------------------------------- |
+ ADD BUFFER RESPONSE | - Perform # HMCs Iterations
+----------------------------------------> -
+
+VMC Interface Open
+After the basic VMC channel has been initialized, an HMC session level
+connection can be established. The application layer performs an open() to
+the VMC device and executes an ioctl() against it, indicating the HMC ID
+(32 bytes of data) for this session. If the VMC device is in an invalid
+state, EIO will be returned for the ioctl(). The device driver creates a
+new HMC session value (ranging from 1 to 255) and HMC index value (starting
+at index 0 and potentially ranging to 254 in future releases) for this HMC
+ID. The driver then does an RDMA of the HMC ID to the hypervisor, and then
+sends an Interface Open message to the hypervisor to establish the session
+over the VMC. After the hypervisor receives this information, it sends Add
+Buffer messages to the management partition to seed an initial pool of
+buffers for the new HMC connection. Finally, the hypervisor sends an
+Interface Open Response message, to indicate that it is ready for normal
+runtime messaging. The following illustrates this VMC flow:
+
+Management Partition Hypervisor
+ RDMA HMC ID
+---------------------------------------->
+ Interface Open
+---------------------------------------->
+ Add Buffer _
+<---------------------------------------- |
+ Add Buffer Response | - Perform N Iterations
+----------------------------------------> -
+ Interface Open Response
+<----------------------------------------
+
+VMC Interface Runtime
+During normal runtime, the Novalink application and the hypervisor
+exchange HMC messages via the Signal VMC message and RDMA operations. When
+sending data to the hypervisor, the Novalink application performs a
+write() to the VMC device, and the driver RDMA’s the data to the hypervisor
+and then sends a Signal Message. If a write() is attempted before VMC
+device buffers have been made available by the hypervisor, or no buffers
+are currently available, EBUSY is returned in response to the write(). A
+write() will return EIO for all other errors, such as an invalid device
+state. When the hypervisor sends a message to the Novalink, the data is
+put into a VMC buffer and an Signal Message is sent to the VMC driver in
+the management partition. The driver RDMA’s the buffer into the partition
+and passes the data up to the appropriate Novalink application via a
+read() to the VMC device. The read() request blocks if there is no buffer
+available to read. The Novalink application may use select() to wait for
+the VMC device to become ready with data to read.
+
+Management Partition Hypervisor
+ MSG RDMA
+---------------------------------------->
+ SIGNAL MSG
+---------------------------------------->
+ SIGNAL MSG
+<----------------------------------------
+ MSG RDMA
+<----------------------------------------
+
+VMC Interface Close
+HMC session level connections are closed by the management partition when
+the application layer performs a close() against the device. This action
+results in an Interface Close message flowing to the hypervisor, which
+causes the session to be terminated. The device driver must free any
+storage allocated for buffers for this HMC connection.
+
+Management Partition Hypervisor
+ INTERFACE CLOSE
+---------------------------------------->
+ INTERFACE CLOSE RESPONSE
+<----------------------------------------
+
+For more information on the documentation for CRQ Messages, VMC Messages,
+HMC interface Buffers, and signal messages please refer to the Linux on
+Power Architecture Platform Reference. Section F.
diff --git a/MAINTAINERS b/MAINTAINERS
index c7182d2..79969f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6721,6 +6721,12 @@ L: linux-scsi at vger.kernel.org
S: Supported
F: drivers/scsi/ibmvscsi/ibmvfc*
+IBM Power Virtual Management Channel Driver
+M: Bryant G. Ly <bryantly at linux.vnet.ibm.com>
+M: Steven Royer <seroyer at linux.vnet.ibm.com>
+S: Supported
+F: drivers/misc/ibmvmc.*
+
IBM Power Virtual SCSI Device Drivers
M: Tyrel Datwyler <tyreld at linux.vnet.ibm.com>
L: linux-scsi at vger.kernel.org
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 2e2ddda..662c834 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -279,6 +279,7 @@
#define H_GET_MPP_X 0x314
#define H_SET_MODE 0x31C
#define H_CLEAR_HPT 0x358
+#define H_REQUEST_VMC 0x360
#define H_RESIZE_HPT_PREPARE 0x36C
#define H_RESIZE_HPT_COMMIT 0x370
#define H_REGISTER_PROC_TBL 0x37C
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 5d71300..3726eac 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -113,6 +113,20 @@ config IBM_ASM
for information on the specific driver level and support statement
for your IBM server.
+config IBMVMC
+ tristate "IBM Virtual Management Channel support"
+ depends on PPC_PSERIES
+ help
+ This is the IBM POWER Virtual Management Channel
+
+ This driver is to be used for the POWER Virtual
+ Management Channel virtual adapter on the PowerVM
+ platform. It provides both request/response and
+ async message support through the /dev/ibmvmc node.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvmc.
+
config PHANTOM
tristate "Sensable PHANToM (PCI)"
depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 20be70c..af22bbc 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -4,6 +4,7 @@
#
obj-$(CONFIG_IBM_ASM) += ibmasm/
+obj-$(CONFIG_IBMVMC) += ibmvmc.o
obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o
obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o
obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
diff --git a/drivers/misc/ibmvmc.c b/drivers/misc/ibmvmc.c
new file mode 100644
index 0000000..ae9cea3
--- /dev/null
+++ b/drivers/misc/ibmvmc.c
@@ -0,0 +1,2415 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * IBM Power Systems Virtual Management Channel Support.
+ *
+ * Copyright (c) 2004, 2018 IBM Corp.
+ * Dave Engebretsen engebret at us.ibm.com
+ * Steven Royer seroyer at linux.vnet.ibm.com
+ * Adam Reznechek adreznec at linux.vnet.ibm.com
+ * Bryant G. Ly <bryantly at linux.vnet.ibm.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/percpu.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/miscdevice.h>
+#include <linux/sched/signal.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/vio.h>
+
+#include "ibmvmc.h"
+
+#define IBMVMC_DRIVER_VERSION "1.0"
+
+/*
+ * Static global variables
+ */
+static DECLARE_WAIT_QUEUE_HEAD(ibmvmc_read_wait);
+
+static const char ibmvmc_driver_name[] = "ibmvmc";
+
+static struct ibmvmc_struct ibmvmc;
+static struct ibmvmc_hmc hmcs[MAX_HMCS];
+static struct crq_server_adapter ibmvmc_adapter;
+
+static int ibmvmc_max_buf_pool_size = DEFAULT_BUF_POOL_SIZE;
+static int ibmvmc_max_hmcs = DEFAULT_HMCS;
+static int ibmvmc_max_mtu = DEFAULT_MTU;
+
+static inline long h_copy_rdma(s64 length, u64 sliobn, u64 slioba,
+ u64 dliobn, u64 dlioba)
+{
+ long rc = 0;
+
+ /* Ensure all writes to source memory are visible before hcall */
+ dma_wmb();
+ pr_debug("ibmvmc: h_copy_rdma(0x%llx, 0x%llx, 0x%llx, 0x%llx, 0x%llx\n",
+ length, sliobn, slioba, dliobn, dlioba);
+ rc = plpar_hcall_norets(H_COPY_RDMA, length, sliobn, slioba,
+ dliobn, dlioba);
+ pr_debug("ibmvmc: h_copy_rdma rc = 0x%lx\n", rc);
+
+ return rc;
+}
+
+static inline void h_free_crq(uint32_t unit_address)
+{
+ long rc = 0;
+
+ do {
+ if (H_IS_LONG_BUSY(rc))
+ msleep(get_longbusy_msecs(rc));
+
+ rc = plpar_hcall_norets(H_FREE_CRQ, unit_address);
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
+}
+
+/**
+ * h_request_vmc: - request a hypervisor virtual management channel device
+ * @vmc_index: drc index of the vmc device created
+ *
+ * Requests the hypervisor create a new virtual management channel device,
+ * allowing this partition to send hypervisor virtualization control
+ * commands.
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static inline long h_request_vmc(u32 *vmc_index)
+{
+ long rc = 0;
+ unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+
+ do {
+ if (H_IS_LONG_BUSY(rc))
+ msleep(get_longbusy_msecs(rc));
+
+ /* Call to request the VMC device from phyp */
+ rc = plpar_hcall(H_REQUEST_VMC, retbuf);
+ pr_debug("ibmvmc: %s rc = 0x%lx\n", __func__, rc);
+ *vmc_index = retbuf[0];
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
+
+ return rc;
+}
+
+/* routines for managing a command/response queue */
+/**
+ * ibmvmc_handle_event: - Interrupt handler for crq events
+ * @irq: number of irq to handle, not used
+ * @dev_instance: crq_server_adapter that received interrupt
+ *
+ * Disables interrupts and schedules ibmvmc_task
+ *
+ * Always returns IRQ_HANDLED
+ */
+static irqreturn_t ibmvmc_handle_event(int irq, void *dev_instance)
+{
+ struct crq_server_adapter *adapter =
+ (struct crq_server_adapter *)dev_instance;
+
+ vio_disable_interrupts(to_vio_dev(adapter->dev));
+ tasklet_schedule(&adapter->work_task);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ibmvmc_release_crq_queue - Release CRQ Queue
+ *
+ * @adapter: crq_server_adapter struct
+ *
+ * Return:
+ * 0 - Success
+ * Non-Zero - Failure
+ */
+static void ibmvmc_release_crq_queue(struct crq_server_adapter *adapter)
+{
+ struct vio_dev *vdev = to_vio_dev(adapter->dev);
+ struct crq_queue *queue = &adapter->queue;
+
+ free_irq(vdev->irq, (void *)adapter);
+ tasklet_kill(&adapter->work_task);
+
+ if (adapter->reset_task)
+ kthread_stop(adapter->reset_task);
+
+ h_free_crq(vdev->unit_address);
+ dma_unmap_single(adapter->dev,
+ queue->msg_token,
+ queue->size * sizeof(*queue->msgs), DMA_BIDIRECTIONAL);
+ free_page((unsigned long)queue->msgs);
+}
+
+/**
+ * ibmvmc_reset_crq_queue - Reset CRQ Queue
+ *
+ * @adapter: crq_server_adapter struct
+ *
+ * This function calls h_free_crq and then calls H_REG_CRQ and does all the
+ * bookkeeping to get us back to where we can communicate.
+ *
+ * Return:
+ * 0 - Success
+ * Non-Zero - Failure
+ */
+static int ibmvmc_reset_crq_queue(struct crq_server_adapter *adapter)
+{
+ struct vio_dev *vdev = to_vio_dev(adapter->dev);
+ struct crq_queue *queue = &adapter->queue;
+ int rc = 0;
+
+ /* Close the CRQ */
+ h_free_crq(vdev->unit_address);
+
+ /* Clean out the queue */
+ memset(queue->msgs, 0x00, PAGE_SIZE);
+ queue->cur = 0;
+
+ /* And re-open it again */
+ rc = plpar_hcall_norets(H_REG_CRQ,
+ vdev->unit_address,
+ queue->msg_token, PAGE_SIZE);
+ if (rc == 2)
+ /* Adapter is good, but other end is not ready */
+ dev_warn(adapter->dev, "Partner adapter not ready\n");
+ else if (rc != 0)
+ dev_err(adapter->dev, "couldn't register crq--rc 0x%x\n", rc);
+
+ return rc;
+}
+
+/**
+ * crq_queue_next_crq: - Returns the next entry in message queue
+ * @queue: crq_queue to use
+ *
+ * Returns pointer to next entry in queue, or NULL if there are no new
+ * entried in the CRQ.
+ */
+static struct ibmvmc_crq_msg *crq_queue_next_crq(struct crq_queue *queue)
+{
+ struct ibmvmc_crq_msg *crq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&queue->lock, flags);
+ crq = &queue->msgs[queue->cur];
+ if (crq->valid & 0x80) {
+ if (++queue->cur == queue->size)
+ queue->cur = 0;
+
+ /* Ensure the read of the valid bit occurs before reading any
+ * other bits of the CRQ entry
+ */
+ dma_rmb();
+ } else {
+ crq = NULL;
+ }
+
+ spin_unlock_irqrestore(&queue->lock, flags);
+
+ return crq;
+}
+
+/**
+ * ibmvmc_send_crq - Send CRQ
+ *
+ * @adapter: crq_server_adapter struct
+ * @word1: Word1 Data field
+ * @word2: Word2 Data field
+ *
+ * Return:
+ * 0 - Success
+ * Non-Zero - Failure
+ */
+static long ibmvmc_send_crq(struct crq_server_adapter *adapter,
+ u64 word1, u64 word2)
+{
+ struct vio_dev *vdev = to_vio_dev(adapter->dev);
+ long rc;
+
+ dev_dbg(adapter->dev, "(0x%x, 0x%016llx, 0x%016llx)\n",
+ vdev->unit_address, word1, word2);
+
+ /*
+ * Ensure the command buffer is flushed to memory before handing it
+ * over to the other side to prevent it from fetching any stale data.
+ */
+ dma_wmb();
+ rc = plpar_hcall_norets(H_SEND_CRQ, vdev->unit_address, word1, word2);
+ dev_dbg(adapter->dev, "rc = 0x%lx\n", rc);
+
+ return rc;
+}
+
+/**
+ * alloc_dma_buffer - Create DMA Buffer
+ *
+ * @vdev: vio_dev struct
+ * @size: Size field
+ * @dma_handle: DMA address field
+ *
+ * Allocates memory for the command queue and maps remote memory into an
+ * ioba.
+ *
+ * Returns a pointer to the buffer
+ */
+static void *alloc_dma_buffer(struct vio_dev *vdev, size_t size,
+ dma_addr_t *dma_handle)
+{
+ /* allocate memory */
+ void *buffer = kzalloc(size, GFP_KERNEL);
+
+ if (!buffer) {
+ *dma_handle = 0;
+ return NULL;
+ }
+
+ /* DMA map */
+ *dma_handle = dma_map_single(&vdev->dev, buffer, size,
+ DMA_BIDIRECTIONAL);
+
+ if (dma_mapping_error(&vdev->dev, *dma_handle)) {
+ *dma_handle = 0;
+ kzfree(buffer);
+ return NULL;
+ }
+
+ return buffer;
+}
+
+/**
+ * free_dma_buffer - Free DMA Buffer
+ *
+ * @vdev: vio_dev struct
+ * @size: Size field
+ * @vaddr: Address field
+ * @dma_handle: DMA address field
+ *
+ * Releases memory for a command queue and unmaps mapped remote memory.
+ */
+static void free_dma_buffer(struct vio_dev *vdev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ /* DMA unmap */
+ dma_unmap_single(&vdev->dev, dma_handle, size, DMA_BIDIRECTIONAL);
+
+ /* deallocate memory */
+ kzfree(vaddr);
+}
+
+/**
+ * ibmvmc_get_valid_hmc_buffer - Retrieve Valid HMC Buffer
+ *
+ * @hmc_index: HMC Index Field
+ *
+ * Return:
+ * Pointer to ibmvmc_buffer
+ */
+static struct ibmvmc_buffer *ibmvmc_get_valid_hmc_buffer(u8 hmc_index)
+{
+ struct ibmvmc_buffer *buffer;
+ struct ibmvmc_buffer *ret_buf = NULL;
+ unsigned long i;
+
+ if (hmc_index > ibmvmc.max_hmc_index)
+ return NULL;
+
+ buffer = hmcs[hmc_index].buffer;
+
+ for (i = 0; i < ibmvmc_max_buf_pool_size; i++) {
+ if (buffer[i].valid && buffer[i].free &&
+ buffer[i].owner == VMC_BUF_OWNER_ALPHA) {
+ buffer[i].free = 0;
+ ret_buf = &buffer[i];
+ break;
+ }
+ }
+
+ return ret_buf;
+}
+
+/**
+ * ibmvmc_get_free_hmc_buffer - Get Free HMC Buffer
+ *
+ * @adapter: crq_server_adapter struct
+ * @hmc_index: Hmc Index field
+ *
+ * Return:
+ * Pointer to ibmvmc_buffer
+ */
+static struct ibmvmc_buffer *ibmvmc_get_free_hmc_buffer(struct crq_server_adapter *adapter,
+ u8 hmc_index)
+{
+ struct ibmvmc_buffer *buffer;
+ struct ibmvmc_buffer *ret_buf = NULL;
+ unsigned long i;
+
+ if (hmc_index > ibmvmc.max_hmc_index) {
+ dev_info(adapter->dev, "get_free_hmc_buffer: invalid hmc_index=0x%x\n",
+ hmc_index);
+ return NULL;
+ }
+
+ buffer = hmcs[hmc_index].buffer;
+
+ for (i = 0; i < ibmvmc_max_buf_pool_size; i++) {
+ if (buffer[i].free &&
+ buffer[i].owner == VMC_BUF_OWNER_ALPHA) {
+ buffer[i].free = 0;
+ ret_buf = &buffer[i];
+ break;
+ }
+ }
+
+ return ret_buf;
+}
+
+/**
+ * ibmvmc_free_hmc_buffer - Free an HMC Buffer
+ *
+ * @hmc: ibmvmc_hmc struct
+ * @buffer: ibmvmc_buffer struct
+ *
+ */
+static void ibmvmc_free_hmc_buffer(struct ibmvmc_hmc *hmc,
+ struct ibmvmc_buffer *buffer)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hmc->lock, flags);
+ buffer->free = 1;
+ spin_unlock_irqrestore(&hmc->lock, flags);
+}
+
+/**
+ * ibmvmc_count_hmc_buffers - Count HMC Buffers
+ *
+ * @hmc_index: HMC Index field
+ * @valid: Valid number of buffers field
+ * @free: Free number of buffers field
+ *
+ */
+static void ibmvmc_count_hmc_buffers(u8 hmc_index, unsigned int *valid,
+ unsigned int *free)
+{
+ struct ibmvmc_buffer *buffer;
+ unsigned long i;
+ unsigned long flags;
+
+ if (hmc_index > ibmvmc.max_hmc_index)
+ return;
+
+ if (!valid || !free)
+ return;
+
+ *valid = 0; *free = 0;
+
+ buffer = hmcs[hmc_index].buffer;
+ spin_lock_irqsave(&hmcs[hmc_index].lock, flags);
+
+ for (i = 0; i < ibmvmc_max_buf_pool_size; i++) {
+ if (buffer[i].valid) {
+ *valid = *valid + 1;
+ if (buffer[i].free)
+ *free = *free + 1;
+ }
+ }
+
+ spin_unlock_irqrestore(&hmcs[hmc_index].lock, flags);
+}
+
+/**
+ * ibmvmc_get_free_hmc - Get Free HMC
+ *
+ * Return:
+ * Pointer to an available HMC Connection
+ * Null otherwise
+ */
+static struct ibmvmc_hmc *ibmvmc_get_free_hmc(void)
+{
+ unsigned long i;
+ unsigned long flags;
+
+ /*
+ * Find an available HMC connection.
+ */
+ for (i = 0; i <= ibmvmc.max_hmc_index; i++) {
+ spin_lock_irqsave(&hmcs[i].lock, flags);
+ if (hmcs[i].state == ibmhmc_state_free) {
+ hmcs[i].index = i;
+ hmcs[i].state = ibmhmc_state_initial;
+ spin_unlock_irqrestore(&hmcs[i].lock, flags);
+ return &hmcs[i];
+ }
+ spin_unlock_irqrestore(&hmcs[i].lock, flags);
+ }
+
+ return NULL;
+}
+
+/**
+ * ibmvmc_return_hmc - Return an HMC Connection
+ *
+ * @hmc: ibmvmc_hmc struct
+ * @release_readers: Number of readers connected to session
+ *
+ * This function releases the HMC connections back into the pool.
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_return_hmc(struct ibmvmc_hmc *hmc, bool release_readers)
+{
+ struct ibmvmc_buffer *buffer;
+ struct crq_server_adapter *adapter;
+ struct vio_dev *vdev;
+ unsigned long i;
+ unsigned long flags;
+
+ if (!hmc || !hmc->adapter)
+ return -EIO;
+
+ if (release_readers) {
+ if (hmc->file_session) {
+ struct ibmvmc_file_session *session = hmc->file_session;
+
+ session->valid = 0;
+ wake_up_interruptible(&ibmvmc_read_wait);
+ }
+ }
+
+ adapter = hmc->adapter;
+ vdev = to_vio_dev(adapter->dev);
+
+ spin_lock_irqsave(&hmc->lock, flags);
+ hmc->index = 0;
+ hmc->state = ibmhmc_state_free;
+ hmc->queue_head = 0;
+ hmc->queue_tail = 0;
+ buffer = hmc->buffer;
+ for (i = 0; i < ibmvmc_max_buf_pool_size; i++) {
+ if (buffer[i].valid) {
+ free_dma_buffer(vdev,
+ ibmvmc.max_mtu,
+ buffer[i].real_addr_local,
+ buffer[i].dma_addr_local);
+ dev_dbg(adapter->dev, "Forgot buffer id 0x%lx\n", i);
+ }
+ memset(&buffer[i], 0, sizeof(struct ibmvmc_buffer));
+
+ hmc->queue_outbound_msgs[i] = VMC_INVALID_BUFFER_ID;
+ }
+
+ spin_unlock_irqrestore(&hmc->lock, flags);
+
+ return 0;
+}
+
+/**
+ * ibmvmc_send_open - Interface Open
+ * @buffer: Pointer to ibmvmc_buffer struct
+ * @hmc: Pointer to ibmvmc_hmc struct
+ *
+ * This command is sent by the management partition as the result of a
+ * management partition device request. It causes the hypervisor to
+ * prepare a set of data buffers for the Novalink connection indicated HMC idx.
+ * A unique HMC Idx would be used if multiple management applications running
+ * concurrently were desired. Before responding to this command, the
+ * hypervisor must provide the management partition with at least one of these
+ * new buffers via the Add Buffer. This indicates whether the messages are
+ * inbound or outbound from the hypervisor.
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_send_open(struct ibmvmc_buffer *buffer,
+ struct ibmvmc_hmc *hmc)
+{
+ struct ibmvmc_crq_msg crq_msg;
+ struct crq_server_adapter *adapter;
+ __be64 *crq_as_u64 = (__be64 *)&crq_msg;
+ int rc = 0;
+
+ if (!hmc || !hmc->adapter)
+ return -EIO;
+
+ adapter = hmc->adapter;
+
+ dev_dbg(adapter->dev, "send_open: 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
+ (unsigned long)buffer->size, (unsigned long)adapter->liobn,
+ (unsigned long)buffer->dma_addr_local,
+ (unsigned long)adapter->riobn,
+ (unsigned long)buffer->dma_addr_remote);
+
+ rc = h_copy_rdma(buffer->size,
+ adapter->liobn,
+ buffer->dma_addr_local,
+ adapter->riobn,
+ buffer->dma_addr_remote);
+ if (rc) {
+ dev_err(adapter->dev, "Error: In send_open, h_copy_rdma rc 0x%x\n",
+ rc);
+ return -EIO;
+ }
+
+ hmc->state = ibmhmc_state_opening;
+
+ crq_msg.valid = 0x80;
+ crq_msg.type = VMC_MSG_OPEN;
+ crq_msg.status = 0;
+ crq_msg.var1.rsvd = 0;
+ crq_msg.hmc_session = hmc->session;
+ crq_msg.hmc_index = hmc->index;
+ crq_msg.var2.buffer_id = cpu_to_be16(buffer->id);
+ crq_msg.rsvd = 0;
+ crq_msg.var3.rsvd = 0;
+
+ ibmvmc_send_crq(adapter, be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]));
+
+ return rc;
+}
+
+/**
+ * ibmvmc_send_close - Interface Close
+ * @hmc: Pointer to ibmvmc_hmc struct
+ *
+ * This command is sent by the management partition to terminate an Novalink to
+ * hypervisor connection. When this command is sent, the management
+ * partition has quiesced all I/O operations to all buffers associated with
+ * this Novalink connection, and has freed any storage for these buffers.
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_send_close(struct ibmvmc_hmc *hmc)
+{
+ struct ibmvmc_crq_msg crq_msg;
+ struct crq_server_adapter *adapter;
+ __be64 *crq_as_u64 = (__be64 *)&crq_msg;
+ int rc = 0;
+
+ if (!hmc || !hmc->adapter)
+ return -EIO;
+
+ adapter = hmc->adapter;
+
+ dev_info(adapter->dev, "CRQ send: close\n");
+
+ crq_msg.valid = 0x80;
+ crq_msg.type = VMC_MSG_CLOSE;
+ crq_msg.status = 0;
+ crq_msg.var1.rsvd = 0;
+ crq_msg.hmc_session = hmc->session;
+ crq_msg.hmc_index = hmc->index;
+ crq_msg.var2.rsvd = 0;
+ crq_msg.rsvd = 0;
+ crq_msg.var3.rsvd = 0;
+
+ ibmvmc_send_crq(adapter, be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]));
+
+ return rc;
+}
+
+/**
+ * ibmvmc_send_capabilities - Send VMC Capabilities
+ *
+ * @adapter: crq_server_adapter struct
+ *
+ * The capabilities message is an administrative message sent after the CRQ
+ * initialization sequence of messages and is used to exchange VMC capabilities
+ * between the management partition and the hypervisor. The management
+ * partition must send this message and the hypervisor must respond with VMC
+ * capabilities Response message before HMC interface message can begin. Any
+ * HMC interface messages received before the exchange of capabilities has
+ * complete are dropped.
+ *
+ * Return:
+ * 0 - Success
+ */
+static int ibmvmc_send_capabilities(struct crq_server_adapter *adapter)
+{
+ struct ibmvmc_admin_crq_msg crq_msg;
+ __be64 *crq_as_u64 = (__be64 *)&crq_msg;
+
+ dev_dbg(adapter->dev, "ibmvmc: CRQ send: capabilities\n");
+ crq_msg.valid = 0x80;
+ crq_msg.type = VMC_MSG_CAP;
+ crq_msg.status = 0;
+ crq_msg.rsvd[0] = 0;
+ crq_msg.rsvd[1] = 0;
+ crq_msg.max_hmc = ibmvmc_max_hmcs;
+ crq_msg.max_mtu = cpu_to_be32(ibmvmc_max_mtu);
+ crq_msg.pool_size = cpu_to_be16(ibmvmc_max_buf_pool_size);
+ crq_msg.crq_size = cpu_to_be16(adapter->queue.size);
+ crq_msg.version = cpu_to_be16(IBMVMC_PROTOCOL_VERSION);
+
+ ibmvmc_send_crq(adapter, be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]));
+
+ ibmvmc.state = ibmvmc_state_capabilities;
+
+ return 0;
+}
+
+/**
+ * ibmvmc_send_add_buffer_resp - Add Buffer Response
+ *
+ * @adapter: crq_server_adapter struct
+ * @status: Status field
+ * @hmc_session: HMC Session field
+ * @hmc_index: HMC Index field
+ * @buffer_id: Buffer Id field
+ *
+ * This command is sent by the management partition to the hypervisor in
+ * response to the Add Buffer message. The Status field indicates the result of
+ * the command.
+ *
+ * Return:
+ * 0 - Success
+ */
+static int ibmvmc_send_add_buffer_resp(struct crq_server_adapter *adapter,
+ u8 status, u8 hmc_session,
+ u8 hmc_index, u16 buffer_id)
+{
+ struct ibmvmc_crq_msg crq_msg;
+ __be64 *crq_as_u64 = (__be64 *)&crq_msg;
+
+ dev_dbg(adapter->dev, "CRQ send: add_buffer_resp\n");
+ crq_msg.valid = 0x80;
+ crq_msg.type = VMC_MSG_ADD_BUF_RESP;
+ crq_msg.status = status;
+ crq_msg.var1.rsvd = 0;
+ crq_msg.hmc_session = hmc_session;
+ crq_msg.hmc_index = hmc_index;
+ crq_msg.var2.buffer_id = cpu_to_be16(buffer_id);
+ crq_msg.rsvd = 0;
+ crq_msg.var3.rsvd = 0;
+
+ ibmvmc_send_crq(adapter, be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]));
+
+ return 0;
+}
+
+/**
+ * ibmvmc_send_rem_buffer_resp - Remove Buffer Response
+ *
+ * @adapter: crq_server_adapter struct
+ * @status: Status field
+ * @hmc_session: HMC Session field
+ * @hmc_index: HMC Index field
+ * @buffer_id: Buffer Id field
+ *
+ * This command is sent by the management partition to the hypervisor in
+ * response to the Remove Buffer message. The Buffer ID field indicates
+ * which buffer the management partition selected to remove. The Status
+ * field indicates the result of the command.
+ *
+ * Return:
+ * 0 - Success
+ */
+static int ibmvmc_send_rem_buffer_resp(struct crq_server_adapter *adapter,
+ u8 status, u8 hmc_session,
+ u8 hmc_index, u16 buffer_id)
+{
+ struct ibmvmc_crq_msg crq_msg;
+ __be64 *crq_as_u64 = (__be64 *)&crq_msg;
+
+ dev_dbg(adapter->dev, "CRQ send: rem_buffer_resp\n");
+ crq_msg.valid = 0x80;
+ crq_msg.type = VMC_MSG_REM_BUF_RESP;
+ crq_msg.status = status;
+ crq_msg.var1.rsvd = 0;
+ crq_msg.hmc_session = hmc_session;
+ crq_msg.hmc_index = hmc_index;
+ crq_msg.var2.buffer_id = cpu_to_be16(buffer_id);
+ crq_msg.rsvd = 0;
+ crq_msg.var3.rsvd = 0;
+
+ ibmvmc_send_crq(adapter, be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]));
+
+ return 0;
+}
+
+/**
+ * ibmvmc_send_msg - Signal Message
+ *
+ * @adapter: crq_server_adapter struct
+ * @buffer: ibmvmc_buffer struct
+ * @hmc: ibmvmc_hmc struct
+ * @msg_length: message length field
+ *
+ * This command is sent between the management partition and the hypervisor
+ * in order to signal the arrival of an HMC protocol message. The command
+ * can be sent by both the management partition and the hypervisor. It is
+ * used for all traffic between the Novalink application and the hypervisor,
+ * regardless of who initiated the communication.
+ *
+ * There is no response to this message.
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_send_msg(struct crq_server_adapter *adapter,
+ struct ibmvmc_buffer *buffer,
+ struct ibmvmc_hmc *hmc, int msg_len)
+{
+ struct ibmvmc_crq_msg crq_msg;
+ __be64 *crq_as_u64 = (__be64 *)&crq_msg;
+ int rc = 0;
+
+ dev_dbg(adapter->dev, "CRQ send: rdma to HV\n");
+ rc = h_copy_rdma(msg_len,
+ adapter->liobn,
+ buffer->dma_addr_local,
+ adapter->riobn,
+ buffer->dma_addr_remote);
+ if (rc) {
+ dev_err(adapter->dev, "Error in send_msg, h_copy_rdma rc 0x%x\n",
+ rc);
+ return rc;
+ }
+
+ crq_msg.valid = 0x80;
+ crq_msg.type = VMC_MSG_SIGNAL;
+ crq_msg.status = 0;
+ crq_msg.var1.rsvd = 0;
+ crq_msg.hmc_session = hmc->session;
+ crq_msg.hmc_index = hmc->index;
+ crq_msg.var2.buffer_id = cpu_to_be16(buffer->id);
+ crq_msg.var3.msg_len = cpu_to_be32(msg_len);
+ dev_dbg(adapter->dev, "CRQ send: msg to HV 0x%llx 0x%llx\n",
+ be64_to_cpu(crq_as_u64[0]), be64_to_cpu(crq_as_u64[1]));
+
+ buffer->owner = VMC_BUF_OWNER_HV;
+ ibmvmc_send_crq(adapter, be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]));
+
+ return rc;
+}
+
+/**
+ * ibmvmc_open - Open Session
+ *
+ * @inode: inode struct
+ * @file: file struct
+ *
+ * Return:
+ * 0 - Success
+ */
+static int ibmvmc_open(struct inode *inode, struct file *file)
+{
+ struct ibmvmc_file_session *session;
+ int rc = 0;
+
+ pr_debug("%s: inode = 0x%lx, file = 0x%lx, state = 0x%x\n", __func__,
+ (unsigned long)inode, (unsigned long)file,
+ ibmvmc.state);
+
+ session = kzalloc(sizeof(*session), GFP_KERNEL);
+ session->file = file;
+ file->private_data = session;
+
+ return rc;
+}
+
+/**
+ * ibmvmc_close - Close Session
+ *
+ * @inode: inode struct
+ * @file: file struct
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_close(struct inode *inode, struct file *file)
+{
+ struct ibmvmc_file_session *session;
+ struct ibmvmc_hmc *hmc;
+ int rc = 0;
+ unsigned long flags;
+
+ pr_debug("%s: file = 0x%lx, state = 0x%x\n", __func__,
+ (unsigned long)file, ibmvmc.state);
+
+ session = file->private_data;
+ if (!session)
+ return -EIO;
+
+ hmc = session->hmc;
+ if (hmc) {
+ if (!hmc->adapter)
+ return -EIO;
+
+ if (ibmvmc.state == ibmvmc_state_failed) {
+ dev_warn(hmc->adapter->dev, "close: state_failed\n");
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&hmc->lock, flags);
+ if (hmc->state >= ibmhmc_state_opening) {
+ rc = ibmvmc_send_close(hmc);
+ if (rc)
+ dev_warn(hmc->adapter->dev, "close: send_close failed.\n");
+ }
+ spin_unlock_irqrestore(&hmc->lock, flags);
+ }
+
+ kzfree(session);
+
+ return rc;
+}
+
+/**
+ * ibmvmc_read - Read
+ *
+ * @file: file struct
+ * @buf: Character buffer
+ * @nbytes: Size in bytes
+ * @ppos: Offset
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static ssize_t ibmvmc_read(struct file *file, char *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct ibmvmc_file_session *session;
+ struct ibmvmc_hmc *hmc;
+ struct crq_server_adapter *adapter;
+ struct ibmvmc_buffer *buffer;
+ ssize_t n;
+ ssize_t retval = 0;
+ unsigned long flags;
+ DEFINE_WAIT(wait);
+
+ pr_debug("ibmvmc: read: file = 0x%lx, buf = 0x%lx, nbytes = 0x%lx\n",
+ (unsigned long)file, (unsigned long)buf,
+ (unsigned long)nbytes);
+
+ if (nbytes == 0)
+ return 0;
+
+ if (nbytes > ibmvmc.max_mtu) {
+ pr_warn("ibmvmc: read: nbytes invalid 0x%x\n",
+ (unsigned int)nbytes);
+ return -EINVAL;
+ }
+
+ session = file->private_data;
+ if (!session) {
+ pr_warn("ibmvmc: read: no session\n");
+ return -EIO;
+ }
+
+ hmc = session->hmc;
+ if (!hmc) {
+ pr_warn("ibmvmc: read: no hmc\n");
+ return -EIO;
+ }
+
+ adapter = hmc->adapter;
+ if (!adapter) {
+ pr_warn("ibmvmc: read: no adapter\n");
+ return -EIO;
+ }
+
+ do {
+ prepare_to_wait(&ibmvmc_read_wait, &wait, TASK_INTERRUPTIBLE);
+
+ spin_lock_irqsave(&hmc->lock, flags);
+ if (hmc->queue_tail != hmc->queue_head)
+ /* Data is available */
+ break;
+
+ spin_unlock_irqrestore(&hmc->lock, flags);
+
+ if (!session->valid) {
+ retval = -EBADFD;
+ goto out;
+ }
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ schedule();
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ goto out;
+ }
+ } while (1);
+
+ buffer = &(hmc->buffer[hmc->queue_outbound_msgs[hmc->queue_tail]]);
+ hmc->queue_tail++;
+ if (hmc->queue_tail == ibmvmc_max_buf_pool_size)
+ hmc->queue_tail = 0;
+ spin_unlock_irqrestore(&hmc->lock, flags);
+
+ nbytes = min_t(size_t, nbytes, buffer->msg_len);
+ n = copy_to_user((void *)buf, buffer->real_addr_local, nbytes);
+ dev_dbg(adapter->dev, "read: copy to user nbytes = 0x%lx.\n", nbytes);
+ ibmvmc_free_hmc_buffer(hmc, buffer);
+ retval = nbytes;
+
+ if (n) {
+ dev_warn(adapter->dev, "read: copy to user failed.\n");
+ retval = -EFAULT;
+ }
+
+ out:
+ finish_wait(&ibmvmc_read_wait, &wait);
+ dev_dbg(adapter->dev, "read: out %ld\n", retval);
+ return retval;
+}
+
+/**
+ * ibmvmc_poll - Poll
+ *
+ * @file: file struct
+ * @wait: Poll Table
+ *
+ * Return:
+ * poll.h return values
+ */
+static unsigned int ibmvmc_poll(struct file *file, poll_table *wait)
+{
+ struct ibmvmc_file_session *session;
+ struct ibmvmc_hmc *hmc;
+ unsigned int mask = 0;
+
+ session = file->private_data;
+ if (!session)
+ return 0;
+
+ hmc = session->hmc;
+ if (!hmc)
+ return 0;
+
+ poll_wait(file, &ibmvmc_read_wait, wait);
+
+ if (hmc->queue_head != hmc->queue_tail)
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+/**
+ * ibmvmc_write - Write
+ *
+ * @file: file struct
+ * @buf: Character buffer
+ * @count: Count field
+ * @ppos: Offset
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static ssize_t ibmvmc_write(struct file *file, const char *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct ibmvmc_buffer *vmc_buffer;
+ struct ibmvmc_file_session *session;
+ struct crq_server_adapter *adapter;
+ struct ibmvmc_hmc *hmc;
+ unsigned char *buf;
+ unsigned long flags;
+ size_t bytes;
+ const char *p = buffer;
+ size_t c = count;
+ int ret = 0;
+
+ session = file->private_data;
+ if (!session)
+ return -EIO;
+
+ hmc = session->hmc;
+ if (!hmc)
+ return -EIO;
+
+ spin_lock_irqsave(&hmc->lock, flags);
+ if (hmc->state == ibmhmc_state_free) {
+ /* HMC connection is not valid (possibly was reset under us). */
+ ret = -EIO;
+ goto out;
+ }
+
+ adapter = hmc->adapter;
+ if (!adapter) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (count > ibmvmc.max_mtu) {
+ dev_warn(adapter->dev, "invalid buffer size 0x%lx\n",
+ (unsigned long)count);
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Waiting for the open resp message to the ioctl(1) - retry */
+ if (hmc->state == ibmhmc_state_opening) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* Make sure the ioctl() was called & the open msg sent, and that
+ * the HMC connection has not failed.
+ */
+ if (hmc->state != ibmhmc_state_ready) {
+ ret = -EIO;
+ goto out;
+ }
+
+ vmc_buffer = ibmvmc_get_valid_hmc_buffer(hmc->index);
+ if (!vmc_buffer) {
+ /* No buffer available for the msg send, or we have not yet
+ * completed the open/open_resp sequence. Retry until this is
+ * complete.
+ */
+ ret = -EBUSY;
+ goto out;
+ }
+ if (!vmc_buffer->real_addr_local) {
+ dev_err(adapter->dev, "no buffer storage assigned\n");
+ ret = -EIO;
+ goto out;
+ }
+ buf = vmc_buffer->real_addr_local;
+
+ while (c > 0) {
+ bytes = min_t(size_t, c, vmc_buffer->size);
+
+ bytes -= copy_from_user(buf, p, bytes);
+ if (!bytes) {
+ ret = -EFAULT;
+ goto out;
+ }
+ c -= bytes;
+ p += bytes;
+ }
+ if (p == buffer)
+ goto out;
+
+ file->f_path.dentry->d_inode->i_mtime = current_time(file_inode(file));
+ mark_inode_dirty(file->f_path.dentry->d_inode);
+
+ dev_dbg(adapter->dev, "write: file = 0x%lx, count = 0x%lx\n",
+ (unsigned long)file, (unsigned long)count);
+
+ ibmvmc_send_msg(adapter, vmc_buffer, hmc, count);
+ ret = p - buffer;
+ out:
+ spin_unlock_irqrestore(&hmc->lock, flags);
+ return (ssize_t)(ret);
+}
+
+/**
+ * ibmvmc_setup_hmc - Setup the HMC
+ *
+ * @session: ibmvmc_file_session struct
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static long ibmvmc_setup_hmc(struct ibmvmc_file_session *session)
+{
+ struct ibmvmc_hmc *hmc;
+ unsigned int valid, free, index;
+
+ if (ibmvmc.state == ibmvmc_state_failed) {
+ pr_warn("ibmvmc: Reserve HMC: state_failed\n");
+ return -EIO;
+ }
+
+ if (ibmvmc.state < ibmvmc_state_ready) {
+ pr_warn("ibmvmc: Reserve HMC: not state_ready\n");
+ return -EAGAIN;
+ }
+
+ /* Device is busy until capabilities have been exchanged and we
+ * have a generic buffer for each possible HMC connection.
+ */
+ for (index = 0; index <= ibmvmc.max_hmc_index; index++) {
+ valid = 0;
+ ibmvmc_count_hmc_buffers(index, &valid, &free);
+ if (valid == 0) {
+ pr_warn("ibmvmc: buffers not ready for index %d\n",
+ index);
+ return -ENOBUFS;
+ }
+ }
+
+ /* Get an hmc object, and transition to ibmhmc_state_initial */
+ hmc = ibmvmc_get_free_hmc();
+ if (!hmc) {
+ pr_warn("%s: free hmc not found\n", __func__);
+ return -EBUSY;
+ }
+
+ hmc->session = hmc->session + 1;
+ if (hmc->session == 0xff)
+ hmc->session = 1;
+
+ session->hmc = hmc;
+ hmc->adapter = &ibmvmc_adapter;
+ hmc->file_session = session;
+ session->valid = 1;
+
+ return 0;
+}
+
+/**
+ * ibmvmc_ioctl_sethmcid - IOCTL Set HMC ID
+ *
+ * @session: ibmvmc_file_session struct
+ * @new_hmc_id: HMC id field
+ *
+ * IOCTL command to setup the hmc id
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static long ibmvmc_ioctl_sethmcid(struct ibmvmc_file_session *session,
+ unsigned char __user *new_hmc_id)
+{
+ struct ibmvmc_hmc *hmc;
+ struct ibmvmc_buffer *buffer;
+ size_t bytes;
+ char print_buffer[HMC_ID_LEN + 1];
+ unsigned long flags;
+ long rc = 0;
+
+ /* Reserve HMC session */
+ hmc = session->hmc;
+ if (!hmc) {
+ rc = ibmvmc_setup_hmc(session);
+ if (rc)
+ return rc;
+
+ hmc = session->hmc;
+ if (!hmc) {
+ pr_err("ibmvmc: setup_hmc success but no hmc\n");
+ return -EIO;
+ }
+ }
+
+ if (hmc->state != ibmhmc_state_initial) {
+ pr_warn("ibmvmc: sethmcid: invalid state to send open 0x%x\n",
+ hmc->state);
+ return -EIO;
+ }
+
+ bytes = copy_from_user(hmc->hmc_id, new_hmc_id, HMC_ID_LEN);
+ if (bytes)
+ return -EFAULT;
+
+ /* Send Open Session command */
+ spin_lock_irqsave(&hmc->lock, flags);
+ buffer = ibmvmc_get_valid_hmc_buffer(hmc->index);
+ spin_unlock_irqrestore(&hmc->lock, flags);
+
+ if (!buffer || !buffer->real_addr_local) {
+ pr_warn("ibmvmc: sethmcid: no buffer available\n");
+ return -EIO;
+ }
+
+ /* Make sure buffer is NULL terminated before trying to print it */
+ memset(print_buffer, 0, HMC_ID_LEN + 1);
+ strncpy(print_buffer, hmc->hmc_id, HMC_ID_LEN);
+ pr_info("ibmvmc: sethmcid: Set HMC ID: \"%s\"\n", print_buffer);
+
+ memcpy(buffer->real_addr_local, hmc->hmc_id, HMC_ID_LEN);
+ /* RDMA over ID, send open msg, change state to ibmhmc_state_opening */
+ rc = ibmvmc_send_open(buffer, hmc);
+
+ return rc;
+}
+
+/**
+ * ibmvmc_ioctl_query - IOCTL Query
+ *
+ * @session: ibmvmc_file_session struct
+ * @ret_struct: ibmvmc_query_struct
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static long ibmvmc_ioctl_query(struct ibmvmc_file_session *session,
+ struct ibmvmc_query_struct __user *ret_struct)
+{
+ struct ibmvmc_query_struct query_struct;
+ size_t bytes;
+
+ memset(&query_struct, 0, sizeof(query_struct));
+ query_struct.have_vmc = (ibmvmc.state > ibmvmc_state_initial);
+ query_struct.state = ibmvmc.state;
+ query_struct.vmc_drc_index = ibmvmc.vmc_drc_index;
+
+ bytes = copy_to_user(ret_struct, &query_struct,
+ sizeof(query_struct));
+ if (bytes)
+ return -EFAULT;
+
+ return 0;
+}
+
+/**
+ * ibmvmc_ioctl_requestvmc - IOCTL Request VMC
+ *
+ * @session: ibmvmc_file_session struct
+ * @ret_vmc_index: VMC Index
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static long ibmvmc_ioctl_requestvmc(struct ibmvmc_file_session *session,
+ u32 __user *ret_vmc_index)
+{
+ /* TODO: (adreznec) Add locking to control multiple process access */
+ size_t bytes;
+ long rc;
+ u32 vmc_drc_index;
+
+ /* Call to request the VMC device from phyp*/
+ rc = h_request_vmc(&vmc_drc_index);
+ pr_debug("ibmvmc: requestvmc: H_REQUEST_VMC rc = 0x%lx\n", rc);
+
+ if (rc == H_SUCCESS) {
+ rc = 0;
+ } else if (rc == H_FUNCTION) {
+ pr_err("ibmvmc: requestvmc: h_request_vmc not supported\n");
+ return -EPERM;
+ } else if (rc == H_AUTHORITY) {
+ pr_err("ibmvmc: requestvmc: hypervisor denied vmc request\n");
+ return -EPERM;
+ } else if (rc == H_HARDWARE) {
+ pr_err("ibmvmc: requestvmc: hypervisor hardware fault\n");
+ return -EIO;
+ } else if (rc == H_RESOURCE) {
+ pr_err("ibmvmc: requestvmc: vmc resource unavailable\n");
+ return -ENODEV;
+ } else if (rc == H_NOT_AVAILABLE) {
+ pr_err("ibmvmc: requestvmc: system cannot be vmc managed\n");
+ return -EPERM;
+ } else if (rc == H_PARAMETER) {
+ pr_err("ibmvmc: requestvmc: invalid parameter\n");
+ return -EINVAL;
+ }
+
+ /* Success, set the vmc index in global struct */
+ ibmvmc.vmc_drc_index = vmc_drc_index;
+
+ bytes = copy_to_user(ret_vmc_index, &vmc_drc_index,
+ sizeof(*ret_vmc_index));
+ if (bytes) {
+ pr_warn("ibmvmc: requestvmc: copy to user failed.\n");
+ return -EFAULT;
+ }
+ return rc;
+}
+
+/**
+ * ibmvmc_ioctl - IOCTL
+ *
+ * @session: ibmvmc_file_session struct
+ * @cmd: cmd field
+ * @arg: Argument field
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static long ibmvmc_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ibmvmc_file_session *session = file->private_data;
+
+ pr_debug("ibmvmc: ioctl file=0x%lx, cmd=0x%x, arg=0x%lx, ses=0x%lx\n",
+ (unsigned long)file, cmd, arg,
+ (unsigned long)session);
+
+ if (!session) {
+ pr_warn("ibmvmc: ioctl: no session\n");
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case VMC_IOCTL_SETHMCID:
+ return ibmvmc_ioctl_sethmcid(session,
+ (unsigned char __user *)arg);
+ case VMC_IOCTL_QUERY:
+ return ibmvmc_ioctl_query(session,
+ (struct ibmvmc_query_struct __user *)arg);
+ case VMC_IOCTL_REQUESTVMC:
+ return ibmvmc_ioctl_requestvmc(session,
+ (unsigned int __user *)arg);
+ default:
+ pr_warn("ibmvmc: unknown ioctl 0x%x\n", cmd);
+ return -EINVAL;
+ }
+}
+
+static const struct file_operations ibmvmc_fops = {
+ .owner = THIS_MODULE,
+ .read = ibmvmc_read,
+ .write = ibmvmc_write,
+ .poll = ibmvmc_poll,
+ .unlocked_ioctl = ibmvmc_ioctl,
+ .open = ibmvmc_open,
+ .release = ibmvmc_close,
+};
+
+/**
+ * ibmvmc_add_buffer - Add Buffer
+ *
+ * @adapter: crq_server_adapter struct
+ * @crq: ibmvmc_crq_msg struct
+ *
+ * This message transfers a buffer from hypervisor ownership to management
+ * partition ownership. The LIOBA is obtained from the virtual TCE table
+ * associated with the hypervisor side of the VMC device, and points to a
+ * buffer of size MTU (as established in the capabilities exchange).
+ *
+ * Typical flow for ading buffers:
+ * 1. A new Novalink connection is opened by the management partition.
+ * 2. The hypervisor assigns new buffers for the traffic associated with
+ * that connection.
+ * 3. The hypervisor sends VMC Add Buffer messages to the management
+ * partition, informing it of the new buffers.
+ * 4. The hypervisor sends an HMC protocol message (to the Novalink application)
+ * notifying it of the new buffers. This informs the application that
+ * it has buffers available for sending HMC commands.
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_add_buffer(struct crq_server_adapter *adapter,
+ struct ibmvmc_crq_msg *crq)
+{
+ struct ibmvmc_buffer *buffer;
+ u8 hmc_index;
+ u8 hmc_session;
+ u16 buffer_id;
+ unsigned long flags;
+ int rc = 0;
+
+ if (!crq)
+ return -1;
+
+ hmc_session = crq->hmc_session;
+ hmc_index = crq->hmc_index;
+ buffer_id = be16_to_cpu(crq->var2.buffer_id);
+
+ if (hmc_index > ibmvmc.max_hmc_index) {
+ dev_err(adapter->dev, "add_buffer: invalid hmc_index = 0x%x\n",
+ hmc_index);
+ ibmvmc_send_add_buffer_resp(adapter, VMC_MSG_INVALID_HMC_INDEX,
+ hmc_session, hmc_index, buffer_id);
+ return -1;
+ }
+
+ if (buffer_id >= ibmvmc.max_buffer_pool_size) {
+ dev_err(adapter->dev, "add_buffer: invalid buffer_id = 0x%x\n",
+ buffer_id);
+ ibmvmc_send_add_buffer_resp(adapter, VMC_MSG_INVALID_BUFFER_ID,
+ hmc_session, hmc_index, buffer_id);
+ return -1;
+ }
+
+ spin_lock_irqsave(&hmcs[hmc_index].lock, flags);
+ buffer = &hmcs[hmc_index].buffer[buffer_id];
+
+ if (buffer->real_addr_local || buffer->dma_addr_local) {
+ dev_warn(adapter->dev, "add_buffer: already allocated id = 0x%lx\n",
+ (unsigned long)buffer_id);
+ spin_unlock_irqrestore(&hmcs[hmc_index].lock, flags);
+ ibmvmc_send_add_buffer_resp(adapter, VMC_MSG_INVALID_BUFFER_ID,
+ hmc_session, hmc_index, buffer_id);
+ return -1;
+ }
+
+ buffer->real_addr_local = alloc_dma_buffer(to_vio_dev(adapter->dev),
+ ibmvmc.max_mtu,
+ &buffer->dma_addr_local);
+
+ if (!buffer->real_addr_local) {
+ dev_err(adapter->dev, "add_buffer: alloc_dma_buffer failed.\n");
+ spin_unlock_irqrestore(&hmcs[hmc_index].lock, flags);
+ ibmvmc_send_add_buffer_resp(adapter, VMC_MSG_INTERFACE_FAILURE,
+ hmc_session, hmc_index, buffer_id);
+ return -1;
+ }
+
+ buffer->dma_addr_remote = be32_to_cpu(crq->var3.lioba);
+ buffer->size = ibmvmc.max_mtu;
+ buffer->owner = crq->var1.owner;
+ buffer->free = 1;
+ /* Must ensure valid==1 is observable only after all other fields are */
+ dma_wmb();
+ buffer->valid = 1;
+ buffer->id = buffer_id;
+
+ dev_dbg(adapter->dev, "add_buffer: successfully added a buffer:\n");
+ dev_dbg(adapter->dev, " index: %d, session: %d, buffer: 0x%x, owner: %d\n",
+ hmc_index, hmc_session, buffer_id, buffer->owner);
+ dev_dbg(adapter->dev, " local: 0x%x, remote: 0x%x\n",
+ (u32)buffer->dma_addr_local,
+ (u32)buffer->dma_addr_remote);
+ spin_unlock_irqrestore(&hmcs[hmc_index].lock, flags);
+
+ ibmvmc_send_add_buffer_resp(adapter, VMC_MSG_SUCCESS, hmc_session,
+ hmc_index, buffer_id);
+
+ return rc;
+}
+
+/**
+ * ibmvmc_rem_buffer - Remove Buffer
+ *
+ * @adapter: crq_server_adapter struct
+ * @crq: ibmvmc_crq_msg struct
+ *
+ * This message requests an HMC buffer to be transferred from management
+ * partition ownership to hypervisor ownership. The management partition may
+ * not be able to satisfy the request at a particular point in time if all its
+ * buffers are in use. The management partition requires a depth of at least
+ * one inbound buffer to allow Novalink commands to flow to the hypervisor. It
+ * is, therefore, an interface error for the hypervisor to attempt to remove the
+ * management partition's last buffer.
+ *
+ * The hypervisor is expected to manage buffer usage with the Novalink
+ * application directly and inform the management partition when buffers may be
+ * removed. The typical flow for removing buffers:
+ *
+ * 1. The Novalink application no longer needs a communication path to a
+ * particular hypervisor function. That function is closed.
+ * 2. The hypervisor and the Novalink application quiesce all traffic to that
+ * function. The hypervisor requests a reduction in buffer pool size.
+ * 3. The Novalink application acknowledges the reduction in buffer pool size.
+ * 4. The hypervisor sends a Remove Buffer message to the management partition,
+ * informing it of the reduction in buffers.
+ * 5. The management partition verifies it can remove the buffer. This is
+ * possible if buffers have been quiesced.
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+/*
+ * The hypervisor requested that we pick an unused buffer, and return it.
+ * Before sending the buffer back, we free any storage associated with the
+ * buffer.
+ */
+static int ibmvmc_rem_buffer(struct crq_server_adapter *adapter,
+ struct ibmvmc_crq_msg *crq)
+{
+ struct ibmvmc_buffer *buffer;
+ u8 hmc_index;
+ u8 hmc_session;
+ u16 buffer_id = 0;
+ unsigned long flags;
+ int rc = 0;
+
+ if (!crq)
+ return -1;
+
+ hmc_session = crq->hmc_session;
+ hmc_index = crq->hmc_index;
+
+ if (hmc_index > ibmvmc.max_hmc_index) {
+ dev_warn(adapter->dev, "rem_buffer: invalid hmc_index = 0x%x\n",
+ hmc_index);
+ ibmvmc_send_rem_buffer_resp(adapter, VMC_MSG_INVALID_HMC_INDEX,
+ hmc_session, hmc_index, buffer_id);
+ return -1;
+ }
+
+ spin_lock_irqsave(&hmcs[hmc_index].lock, flags);
+ buffer = ibmvmc_get_free_hmc_buffer(adapter, hmc_index);
+ if (!buffer) {
+ dev_info(adapter->dev, "rem_buffer: no buffer to remove\n");
+ spin_unlock_irqrestore(&hmcs[hmc_index].lock, flags);
+ ibmvmc_send_rem_buffer_resp(adapter, VMC_MSG_NO_BUFFER,
+ hmc_session, hmc_index,
+ VMC_INVALID_BUFFER_ID);
+ return -1;
+ }
+
+ buffer_id = buffer->id;
+
+ if (buffer->valid)
+ free_dma_buffer(to_vio_dev(adapter->dev),
+ ibmvmc.max_mtu,
+ buffer->real_addr_local,
+ buffer->dma_addr_local);
+
+ memset(buffer, 0, sizeof(struct ibmvmc_buffer));
+ spin_unlock_irqrestore(&hmcs[hmc_index].lock, flags);
+
+ dev_dbg(adapter->dev, "rem_buffer: removed buffer 0x%x.\n", buffer_id);
+ ibmvmc_send_rem_buffer_resp(adapter, VMC_MSG_SUCCESS, hmc_session,
+ hmc_index, buffer_id);
+
+ return rc;
+}
+
+static int ibmvmc_recv_msg(struct crq_server_adapter *adapter,
+ struct ibmvmc_crq_msg *crq)
+{
+ struct ibmvmc_buffer *buffer;
+ struct ibmvmc_hmc *hmc;
+ unsigned long msg_len;
+ u8 hmc_index;
+ u8 hmc_session;
+ u16 buffer_id;
+ unsigned long flags;
+ int rc = 0;
+
+ if (!crq)
+ return -1;
+
+ /* Hypervisor writes CRQs directly into our memory in big endian */
+ dev_dbg(adapter->dev, "Recv_msg: msg from HV 0x%016llx 0x%016llx\n",
+ be64_to_cpu(*((unsigned long *)crq)),
+ be64_to_cpu(*(((unsigned long *)crq) + 1)));
+
+ hmc_session = crq->hmc_session;
+ hmc_index = crq->hmc_index;
+ buffer_id = be16_to_cpu(crq->var2.buffer_id);
+ msg_len = be32_to_cpu(crq->var3.msg_len);
+
+ if (hmc_index > ibmvmc.max_hmc_index) {
+ dev_err(adapter->dev, "Recv_msg: invalid hmc_index = 0x%x\n",
+ hmc_index);
+ ibmvmc_send_add_buffer_resp(adapter, VMC_MSG_INVALID_HMC_INDEX,
+ hmc_session, hmc_index, buffer_id);
+ return -1;
+ }
+
+ if (buffer_id >= ibmvmc.max_buffer_pool_size) {
+ dev_err(adapter->dev, "Recv_msg: invalid buffer_id = 0x%x\n",
+ buffer_id);
+ ibmvmc_send_add_buffer_resp(adapter, VMC_MSG_INVALID_BUFFER_ID,
+ hmc_session, hmc_index, buffer_id);
+ return -1;
+ }
+
+ hmc = &hmcs[hmc_index];
+ spin_lock_irqsave(&hmc->lock, flags);
+
+ if (hmc->state == ibmhmc_state_free) {
+ dev_err(adapter->dev, "Recv_msg: invalid hmc state = 0x%x\n",
+ hmc->state);
+ /* HMC connection is not valid (possibly was reset under us). */
+ spin_unlock_irqrestore(&hmc->lock, flags);
+ return -1;
+ }
+
+ buffer = &hmc->buffer[buffer_id];
+
+ if (buffer->valid == 0 || buffer->owner == VMC_BUF_OWNER_ALPHA) {
+ dev_err(adapter->dev, "Recv_msg: not valid, or not HV. 0x%x 0x%x\n",
+ buffer->valid, buffer->owner);
+ spin_unlock_irqrestore(&hmc->lock, flags);
+ return -1;
+ }
+
+ /* RDMA the data into the partition. */
+ rc = h_copy_rdma(msg_len,
+ adapter->riobn,
+ buffer->dma_addr_remote,
+ adapter->liobn,
+ buffer->dma_addr_local);
+
+ dev_dbg(adapter->dev, "Recv_msg: msg_len = 0x%x, buffer_id = 0x%x, queue_head = 0x%x, hmc_idx = 0x%x\n",
+ (unsigned int)msg_len, (unsigned int)buffer_id,
+ (unsigned int)hmc->queue_head, (unsigned int)hmc_index);
+ buffer->msg_len = msg_len;
+ buffer->free = 0;
+ buffer->owner = VMC_BUF_OWNER_ALPHA;
+
+ if (rc) {
+ dev_err(adapter->dev, "Failure in recv_msg: h_copy_rdma = 0x%x\n",
+ rc);
+ spin_unlock_irqrestore(&hmc->lock, flags);
+ return -1;
+ }
+
+ /* Must be locked because read operates on the same data */
+ hmc->queue_outbound_msgs[hmc->queue_head] = buffer_id;
+ hmc->queue_head++;
+ if (hmc->queue_head == ibmvmc_max_buf_pool_size)
+ hmc->queue_head = 0;
+
+ if (hmc->queue_head == hmc->queue_tail)
+ dev_err(adapter->dev, "outbound buffer queue wrapped.\n");
+
+ spin_unlock_irqrestore(&hmc->lock, flags);
+
+ wake_up_interruptible(&ibmvmc_read_wait);
+
+ return 0;
+}
+
+/**
+ * ibmvmc_process_capabilities - Process Capabilities
+ *
+ * @adapter: crq_server_adapter struct
+ * @crqp: ibmvmc_crq_msg struct
+ *
+ */
+static void ibmvmc_process_capabilities(struct crq_server_adapter *adapter,
+ struct ibmvmc_crq_msg *crqp)
+{
+ struct ibmvmc_admin_crq_msg *crq = (struct ibmvmc_admin_crq_msg *)crqp;
+
+ if ((be16_to_cpu(crq->version) >> 8) !=
+ (IBMVMC_PROTOCOL_VERSION >> 8)) {
+ dev_err(adapter->dev, "init failed, incompatible versions 0x%x 0x%x\n",
+ be16_to_cpu(crq->version),
+ IBMVMC_PROTOCOL_VERSION);
+ ibmvmc.state = ibmvmc_state_failed;
+ return;
+ }
+
+ ibmvmc.max_mtu = min_t(u32, ibmvmc_max_mtu, be32_to_cpu(crq->max_mtu));
+ ibmvmc.max_buffer_pool_size = min_t(u16, ibmvmc_max_buf_pool_size,
+ be16_to_cpu(crq->pool_size));
+ ibmvmc.max_hmc_index = min_t(u8, ibmvmc_max_hmcs, crq->max_hmc) - 1;
+ ibmvmc.state = ibmvmc_state_ready;
+
+ dev_info(adapter->dev, "Capabilities: mtu=0x%x, pool_size=0x%x, max_hmc=0x%x\n",
+ ibmvmc.max_mtu, ibmvmc.max_buffer_pool_size,
+ ibmvmc.max_hmc_index);
+}
+
+/**
+ * ibmvmc_validate_hmc_session - Validate HMC Session
+ *
+ * @adapter: crq_server_adapter struct
+ * @crq: ibmvmc_crq_msg struct
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_validate_hmc_session(struct crq_server_adapter *adapter,
+ struct ibmvmc_crq_msg *crq)
+{
+ unsigned char hmc_index;
+
+ hmc_index = crq->hmc_index;
+
+ if (crq->hmc_session == 0)
+ return 0;
+
+ if (hmc_index > ibmvmc.max_hmc_index)
+ return -1;
+
+ if (hmcs[hmc_index].session != crq->hmc_session) {
+ dev_warn(adapter->dev, "Drop, bad session: expected 0x%x, recv 0x%x\n",
+ hmcs[hmc_index].session, crq->hmc_session);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * ibmvmc_reset - Reset
+ *
+ * @adapter: crq_server_adapter struct
+ * @xport_event: export_event field
+ *
+ * Closes all HMC sessions and conditionally schedules a CRQ reset.
+ * @xport_event: If true, the partner closed their CRQ; we don't need to reset.
+ * If false, we need to schedule a CRQ reset.
+ */
+static void ibmvmc_reset(struct crq_server_adapter *adapter, bool xport_event)
+{
+ int i;
+
+ if (ibmvmc.state != ibmvmc_state_sched_reset) {
+ dev_info(adapter->dev, "*** Reset to initial state.\n");
+ for (i = 0; i < ibmvmc_max_hmcs; i++)
+ ibmvmc_return_hmc(&hmcs[i], xport_event);
+
+ if (xport_event) {
+ /* CRQ was closed by the partner. We don't need to do
+ * anything except set ourself to the correct state to
+ * handle init msgs.
+ */
+ ibmvmc.state = ibmvmc_state_crqinit;
+ } else {
+ /* The partner did not close their CRQ - instead, we're
+ * closing the CRQ on our end. Need to schedule this
+ * for process context, because CRQ reset may require a
+ * sleep.
+ *
+ * Setting ibmvmc.state here immediately prevents
+ * ibmvmc_open from completing until the reset
+ * completes in process context.
+ */
+ ibmvmc.state = ibmvmc_state_sched_reset;
+ dev_dbg(adapter->dev, "Device reset scheduled");
+ wake_up_interruptible(&adapter->reset_wait_queue);
+ }
+ }
+}
+
+/**
+ * ibmvmc_reset_task - Reset Task
+ *
+ * @data: Data field
+ *
+ * Performs a CRQ reset of the VMC device in process context.
+ * NOTE: This function should not be called directly, use ibmvmc_reset.
+ */
+static int ibmvmc_reset_task(void *data)
+{
+ struct crq_server_adapter *adapter = data;
+ int rc;
+
+ set_user_nice(current, -20);
+
+ while (!kthread_should_stop()) {
+ wait_event_interruptible(adapter->reset_wait_queue,
+ (ibmvmc.state == ibmvmc_state_sched_reset) ||
+ kthread_should_stop());
+
+ if (kthread_should_stop())
+ break;
+
+ dev_dbg(adapter->dev, "CRQ resetting in process context");
+ tasklet_disable(&adapter->work_task);
+
+ rc = ibmvmc_reset_crq_queue(adapter);
+
+ if (rc != H_SUCCESS && rc != H_RESOURCE) {
+ dev_err(adapter->dev, "Error initializing CRQ. rc = 0x%x\n",
+ rc);
+ ibmvmc.state = ibmvmc_state_failed;
+ } else {
+ ibmvmc.state = ibmvmc_state_crqinit;
+
+ if (ibmvmc_send_crq(adapter, 0xC001000000000000LL, 0)
+ != 0 && rc != H_RESOURCE)
+ dev_warn(adapter->dev, "Failed to send initialize CRQ message\n");
+ }
+
+ vio_enable_interrupts(to_vio_dev(adapter->dev));
+ tasklet_enable(&adapter->work_task);
+ }
+
+ return 0;
+}
+
+/**
+ * ibmvmc_process_open_resp - Process Open Response
+ *
+ * @crq: ibmvmc_crq_msg struct
+ * @adapter: crq_server_adapter struct
+ *
+ * This command is sent by the hypervisor in response to the Interface
+ * Open message. When this message is received, the indicated buffer is
+ * again available for management partition use.
+ */
+static void ibmvmc_process_open_resp(struct ibmvmc_crq_msg *crq,
+ struct crq_server_adapter *adapter)
+{
+ unsigned char hmc_index;
+ unsigned short buffer_id;
+
+ hmc_index = crq->hmc_index;
+ if (hmc_index > ibmvmc.max_hmc_index) {
+ /* Why would PHYP give an index > max negotiated? */
+ ibmvmc_reset(adapter, false);
+ return;
+ }
+
+ if (crq->status) {
+ dev_warn(adapter->dev, "open_resp: failed - status 0x%x\n",
+ crq->status);
+ ibmvmc_return_hmc(&hmcs[hmc_index], false);
+ return;
+ }
+
+ if (hmcs[hmc_index].state == ibmhmc_state_opening) {
+ buffer_id = be16_to_cpu(crq->var2.buffer_id);
+ if (buffer_id >= ibmvmc.max_buffer_pool_size) {
+ dev_err(adapter->dev, "open_resp: invalid buffer_id = 0x%x\n",
+ buffer_id);
+ hmcs[hmc_index].state = ibmhmc_state_failed;
+ } else {
+ ibmvmc_free_hmc_buffer(&hmcs[hmc_index],
+ &hmcs[hmc_index].buffer[buffer_id]);
+ hmcs[hmc_index].state = ibmhmc_state_ready;
+ dev_dbg(adapter->dev, "open_resp: set hmc state = ready\n");
+ }
+ } else {
+ dev_warn(adapter->dev, "open_resp: invalid hmc state (0x%x)\n",
+ hmcs[hmc_index].state);
+ }
+}
+
+/**
+ * ibmvmc_process_close_resp - Process Close Response
+ *
+ * @crq: ibmvmc_crq_msg struct
+ * @adapter: crq_server_adapter struct
+ *
+ * This command is sent by the hypervisor in response to the Novalink Interface
+ * Close message.
+ *
+ * If the close fails, simply reset the entire driver as the state of the VMC
+ * must be in tough shape.
+ */
+static void ibmvmc_process_close_resp(struct ibmvmc_crq_msg *crq,
+ struct crq_server_adapter *adapter)
+{
+ unsigned char hmc_index;
+
+ hmc_index = crq->hmc_index;
+ if (hmc_index > ibmvmc.max_hmc_index) {
+ ibmvmc_reset(adapter, false);
+ return;
+ }
+
+ if (crq->status) {
+ dev_warn(adapter->dev, "close_resp: failed - status 0x%x\n",
+ crq->status);
+ ibmvmc_reset(adapter, false);
+ return;
+ }
+
+ ibmvmc_return_hmc(&hmcs[hmc_index], false);
+}
+
+/**
+ * ibmvmc_crq_process - Process CRQ
+ *
+ * @adapter: crq_server_adapter struct
+ * @crq: ibmvmc_crq_msg struct
+ *
+ * Process the CRQ message based upon the type of message received.
+ *
+ */
+static void ibmvmc_crq_process(struct crq_server_adapter *adapter,
+ struct ibmvmc_crq_msg *crq)
+{
+ switch (crq->type) {
+ case VMC_MSG_CAP_RESP:
+ dev_dbg(adapter->dev, "CRQ recv: capabilities resp (0x%x)\n",
+ crq->type);
+ if (ibmvmc.state == ibmvmc_state_capabilities)
+ ibmvmc_process_capabilities(adapter, crq);
+ else
+ dev_warn(adapter->dev, "caps msg invalid in state 0x%x\n",
+ ibmvmc.state);
+ break;
+ case VMC_MSG_OPEN_RESP:
+ dev_dbg(adapter->dev, "CRQ recv: open resp (0x%x)\n",
+ crq->type);
+ if (ibmvmc_validate_hmc_session(adapter, crq) == 0)
+ ibmvmc_process_open_resp(crq, adapter);
+ break;
+ case VMC_MSG_ADD_BUF:
+ dev_dbg(adapter->dev, "CRQ recv: add buf (0x%x)\n",
+ crq->type);
+ if (ibmvmc_validate_hmc_session(adapter, crq) == 0)
+ ibmvmc_add_buffer(adapter, crq);
+ break;
+ case VMC_MSG_REM_BUF:
+ dev_dbg(adapter->dev, "CRQ recv: rem buf (0x%x)\n",
+ crq->type);
+ if (ibmvmc_validate_hmc_session(adapter, crq) == 0)
+ ibmvmc_rem_buffer(adapter, crq);
+ break;
+ case VMC_MSG_SIGNAL:
+ dev_dbg(adapter->dev, "CRQ recv: signal msg (0x%x)\n",
+ crq->type);
+ if (ibmvmc_validate_hmc_session(adapter, crq) == 0)
+ ibmvmc_recv_msg(adapter, crq);
+ break;
+ case VMC_MSG_CLOSE_RESP:
+ dev_dbg(adapter->dev, "CRQ recv: close resp (0x%x)\n",
+ crq->type);
+ if (ibmvmc_validate_hmc_session(adapter, crq) == 0)
+ ibmvmc_process_close_resp(crq, adapter);
+ break;
+ case VMC_MSG_CAP:
+ case VMC_MSG_OPEN:
+ case VMC_MSG_CLOSE:
+ case VMC_MSG_ADD_BUF_RESP:
+ case VMC_MSG_REM_BUF_RESP:
+ dev_warn(adapter->dev, "CRQ recv: unexpected msg (0x%x)\n",
+ crq->type);
+ break;
+ default:
+ dev_warn(adapter->dev, "CRQ recv: unknown msg (0x%x)\n",
+ crq->type);
+ break;
+ }
+}
+
+/**
+ * ibmvmc_handle_crq_init - Handle CRQ Init
+ *
+ * @crq: ibmvmc_crq_msg struct
+ * @adapter: crq_server_adapter struct
+ *
+ * Handle the type of crq initialization based on whether
+ * it is a message or a response.
+ *
+ */
+static void ibmvmc_handle_crq_init(struct ibmvmc_crq_msg *crq,
+ struct crq_server_adapter *adapter)
+{
+ switch (crq->type) {
+ case 0x01: /* Initialization message */
+ dev_dbg(adapter->dev, "CRQ recv: CRQ init msg - state 0x%x\n",
+ ibmvmc.state);
+ if (ibmvmc.state == ibmvmc_state_crqinit) {
+ /* Send back a response */
+ if (ibmvmc_send_crq(adapter, 0xC002000000000000,
+ 0) == 0)
+ ibmvmc_send_capabilities(adapter);
+ else
+ dev_err(adapter->dev, " Unable to send init rsp\n");
+ } else {
+ dev_err(adapter->dev, "Invalid state 0x%x mtu = 0x%x\n",
+ ibmvmc.state, ibmvmc.max_mtu);
+ }
+
+ break;
+ case 0x02: /* Initialization response */
+ dev_dbg(adapter->dev, "CRQ recv: initialization resp msg - state 0x%x\n",
+ ibmvmc.state);
+ if (ibmvmc.state == ibmvmc_state_crqinit)
+ ibmvmc_send_capabilities(adapter);
+ break;
+ default:
+ dev_warn(adapter->dev, "Unknown crq message type 0x%lx\n",
+ (unsigned long)crq->type);
+ }
+}
+
+/**
+ * ibmvmc_handle_crq - Handle CRQ
+ *
+ * @crq: ibmvmc_crq_msg struct
+ * @adapter: crq_server_adapter struct
+ *
+ * Read the command elements from the command queue and execute the
+ * requests based upon the type of crq message.
+ *
+ */
+static void ibmvmc_handle_crq(struct ibmvmc_crq_msg *crq,
+ struct crq_server_adapter *adapter)
+{
+ switch (crq->valid) {
+ case 0xC0: /* initialization */
+ ibmvmc_handle_crq_init(crq, adapter);
+ break;
+ case 0xFF: /* Hypervisor telling us the connection is closed */
+ dev_warn(adapter->dev, "CRQ recv: virtual adapter failed - resetting.\n");
+ ibmvmc_reset(adapter, true);
+ break;
+ case 0x80: /* real payload */
+ ibmvmc_crq_process(adapter, crq);
+ break;
+ default:
+ dev_warn(adapter->dev, "CRQ recv: unknown msg 0x%02x.\n",
+ crq->valid);
+ break;
+ }
+}
+
+static void ibmvmc_task(unsigned long data)
+{
+ struct crq_server_adapter *adapter =
+ (struct crq_server_adapter *)data;
+ struct vio_dev *vdev = to_vio_dev(adapter->dev);
+ struct ibmvmc_crq_msg *crq;
+ int done = 0;
+
+ while (!done) {
+ /* Pull all the valid messages off the CRQ */
+ while ((crq = crq_queue_next_crq(&adapter->queue)) != NULL) {
+ ibmvmc_handle_crq(crq, adapter);
+ crq->valid = 0x00;
+ /* CRQ reset was requested, stop processing CRQs.
+ * Interrupts will be re-enabled by the reset task.
+ */
+ if (ibmvmc.state == ibmvmc_state_sched_reset)
+ return;
+ }
+
+ vio_enable_interrupts(vdev);
+ crq = crq_queue_next_crq(&adapter->queue);
+ if (crq) {
+ vio_disable_interrupts(vdev);
+ ibmvmc_handle_crq(crq, adapter);
+ crq->valid = 0x00;
+ /* CRQ reset was requested, stop processing CRQs.
+ * Interrupts will be re-enabled by the reset task.
+ */
+ if (ibmvmc.state == ibmvmc_state_sched_reset)
+ return;
+ } else {
+ done = 1;
+ }
+ }
+}
+
+/**
+ * ibmvmc_init_crq_queue - Init CRQ Queue
+ *
+ * @adapter: crq_server_adapter struct
+ *
+ * Return:
+ * 0 - Success
+ * Non-zero - Failure
+ */
+static int ibmvmc_init_crq_queue(struct crq_server_adapter *adapter)
+{
+ struct vio_dev *vdev = to_vio_dev(adapter->dev);
+ struct crq_queue *queue = &adapter->queue;
+ int rc;
+ int retrc;
+
+ queue->msgs = (struct ibmvmc_crq_msg *)get_zeroed_page(GFP_KERNEL);
+
+ if (!queue->msgs)
+ goto malloc_failed;
+
+ queue->size = PAGE_SIZE / sizeof(*queue->msgs);
+
+ queue->msg_token = dma_map_single(adapter->dev, queue->msgs,
+ queue->size * sizeof(*queue->msgs),
+ DMA_BIDIRECTIONAL);
+
+ if (dma_mapping_error(adapter->dev, queue->msg_token))
+ goto map_failed;
+
+ retrc = plpar_hcall_norets(H_REG_CRQ,
+ vdev->unit_address,
+ queue->msg_token, PAGE_SIZE);
+ retrc = rc;
+
+ if (rc == H_RESOURCE)
+ rc = ibmvmc_reset_crq_queue(adapter);
+
+ if (rc == 2) {
+ dev_warn(adapter->dev, "Partner adapter not ready\n");
+ retrc = 0;
+ } else if (rc != 0) {
+ dev_err(adapter->dev, "Error %d opening adapter\n", rc);
+ goto reg_crq_failed;
+ }
+
+ queue->cur = 0;
+ spin_lock_init(&queue->lock);
+
+ tasklet_init(&adapter->work_task, ibmvmc_task, (unsigned long)adapter);
+
+ if (request_irq(vdev->irq,
+ ibmvmc_handle_event,
+ 0, "ibmvmc", (void *)adapter) != 0) {
+ dev_err(adapter->dev, "couldn't register irq 0x%x\n",
+ vdev->irq);
+ goto req_irq_failed;
+ }
+
+ rc = vio_enable_interrupts(vdev);
+ if (rc != 0) {
+ dev_err(adapter->dev, "Error %d enabling interrupts!!!\n", rc);
+ goto req_irq_failed;
+ }
+
+ return retrc;
+
+req_irq_failed:
+ /* Cannot have any work since we either never got our IRQ registered,
+ * or never got interrupts enabled
+ */
+ tasklet_kill(&adapter->work_task);
+ h_free_crq(vdev->unit_address);
+reg_crq_failed:
+ dma_unmap_single(adapter->dev,
+ queue->msg_token,
+ queue->size * sizeof(*queue->msgs), DMA_BIDIRECTIONAL);
+map_failed:
+ free_page((unsigned long)queue->msgs);
+malloc_failed:
+ return -ENOMEM;
+}
+
+/* Fill in the liobn and riobn fields on the adapter */
+static int read_dma_window(struct vio_dev *vdev,
+ struct crq_server_adapter *adapter)
+{
+ const __be32 *dma_window;
+ const __be32 *prop;
+
+ /* TODO Using of_parse_dma_window would be better, but it doesn't give
+ * a way to read multiple windows without already knowing the size of
+ * a window or the number of windows
+ */
+ dma_window =
+ (const __be32 *)vio_get_attribute(vdev, "ibm,my-dma-window",
+ NULL);
+ if (!dma_window) {
+ dev_warn(adapter->dev, "Couldn't find ibm,my-dma-window property\n");
+ return -1;
+ }
+
+ adapter->liobn = be32_to_cpu(*dma_window);
+ dma_window++;
+
+ prop = (const __be32 *)vio_get_attribute(vdev, "ibm,#dma-address-cells",
+ NULL);
+ if (!prop) {
+ dev_warn(adapter->dev, "Couldn't find ibm,#dma-address-cells property\n");
+ dma_window++;
+ } else {
+ dma_window += be32_to_cpu(*prop);
+ }
+
+ prop = (const __be32 *)vio_get_attribute(vdev, "ibm,#dma-size-cells",
+ NULL);
+ if (!prop) {
+ dev_warn(adapter->dev, "Couldn't find ibm,#dma-size-cells property\n");
+ dma_window++;
+ } else {
+ dma_window += be32_to_cpu(*prop);
+ }
+
+ /* dma_window should point to the second window now */
+ adapter->riobn = be32_to_cpu(*dma_window);
+
+ return 0;
+}
+
+static int ibmvmc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
+{
+ struct crq_server_adapter *adapter = &ibmvmc_adapter;
+ int rc;
+
+ dev_set_drvdata(&vdev->dev, NULL);
+ memset(adapter, 0, sizeof(*adapter));
+ adapter->dev = &vdev->dev;
+
+ dev_info(adapter->dev, "Probe for UA 0x%x\n", vdev->unit_address);
+
+ rc = read_dma_window(vdev, adapter);
+ if (rc != 0) {
+ ibmvmc.state = ibmvmc_state_failed;
+ return -1;
+ }
+
+ dev_dbg(adapter->dev, "Probe: liobn 0x%x, riobn 0x%x\n",
+ adapter->liobn, adapter->riobn);
+
+ init_waitqueue_head(&adapter->reset_wait_queue);
+ adapter->reset_task = kthread_run(ibmvmc_reset_task, adapter, "ibmvmc");
+ if (IS_ERR(adapter->reset_task)) {
+ dev_err(adapter->dev, "Failed to start reset thread\n");
+ ibmvmc.state = ibmvmc_state_failed;
+ rc = PTR_ERR(adapter->reset_task);
+ adapter->reset_task = NULL;
+ return rc;
+ }
+
+ rc = ibmvmc_init_crq_queue(adapter);
+ if (rc != 0 && rc != H_RESOURCE) {
+ dev_err(adapter->dev, "Error initializing CRQ. rc = 0x%x\n",
+ rc);
+ ibmvmc.state = ibmvmc_state_failed;
+ goto crq_failed;
+ }
+
+ ibmvmc.state = ibmvmc_state_crqinit;
+
+ /* Try to send an initialization message. Note that this is allowed
+ * to fail if the other end is not acive. In that case we just wait
+ * for the other side to initialize.
+ */
+ if (ibmvmc_send_crq(adapter, 0xC001000000000000LL, 0) != 0 &&
+ rc != H_RESOURCE)
+ dev_warn(adapter->dev, "Failed to send initialize CRQ message\n");
+
+ dev_set_drvdata(&vdev->dev, adapter);
+
+ return 0;
+
+crq_failed:
+ kthread_stop(adapter->reset_task);
+ adapter->reset_task = NULL;
+ return -EPERM;
+}
+
+static int ibmvmc_remove(struct vio_dev *vdev)
+{
+ struct crq_server_adapter *adapter = dev_get_drvdata(&vdev->dev);
+
+ dev_info(adapter->dev, "Entering remove for UA 0x%x\n",
+ vdev->unit_address);
+ ibmvmc_release_crq_queue(adapter);
+
+ return 0;
+}
+
+static struct vio_device_id ibmvmc_device_table[] = {
+ { "ibm,vmc", "IBM,vmc" },
+ { "", "" }
+};
+MODULE_DEVICE_TABLE(vio, ibmvmc_device_table);
+
+static struct vio_driver ibmvmc_driver = {
+ .name = ibmvmc_driver_name,
+ .id_table = ibmvmc_device_table,
+ .probe = ibmvmc_probe,
+ .remove = ibmvmc_remove,
+};
+
+static void __init ibmvmc_scrub_module_parms(void)
+{
+ if (ibmvmc_max_mtu > MAX_MTU) {
+ pr_warn("ibmvmc: Max MTU reduced to %d\n", MAX_MTU);
+ ibmvmc_max_mtu = MAX_MTU;
+ } else if (ibmvmc_max_mtu < MIN_MTU) {
+ pr_warn("ibmvmc: Max MTU increased to %d\n", MIN_MTU);
+ ibmvmc_max_mtu = MIN_MTU;
+ }
+
+ if (ibmvmc_max_buf_pool_size > MAX_BUF_POOL_SIZE) {
+ pr_warn("ibmvmc: Max buffer pool size reduced to %d\n",
+ MAX_BUF_POOL_SIZE);
+ ibmvmc_max_buf_pool_size = MAX_BUF_POOL_SIZE;
+ } else if (ibmvmc_max_buf_pool_size < MIN_BUF_POOL_SIZE) {
+ pr_warn("ibmvmc: Max buffer pool size increased to %d\n",
+ MIN_BUF_POOL_SIZE);
+ ibmvmc_max_buf_pool_size = MIN_BUF_POOL_SIZE;
+ }
+
+ if (ibmvmc_max_hmcs > MAX_HMCS) {
+ pr_warn("ibmvmc: Max HMCs reduced to %d\n", MAX_HMCS);
+ ibmvmc_max_hmcs = MAX_HMCS;
+ } else if (ibmvmc_max_hmcs < MIN_HMCS) {
+ pr_warn("ibmvmc: Max HMCs increased to %d\n", MIN_HMCS);
+ ibmvmc_max_hmcs = MIN_HMCS;
+ }
+}
+
+static struct miscdevice ibmvmc_miscdev = {
+ .name = ibmvmc_driver_name,
+ .minor = MISC_DYNAMIC_MINOR,
+ .fops = &ibmvmc_fops,
+};
+
+static int __init ibmvmc_module_init(void)
+{
+ int rc, i, j;
+
+ ibmvmc.state = ibmvmc_state_initial;
+ pr_info("ibmvmc: version %s\n", IBMVMC_DRIVER_VERSION);
+
+ rc = misc_register(&ibmvmc_miscdev);
+ if (rc) {
+ pr_err("ibmvmc: misc registration failed\n");
+ goto misc_register_failed;
+ }
+ pr_info("ibmvmc: node %d:%d\n", MISC_MAJOR,
+ ibmvmc_miscdev.minor);
+
+ /* Initialize data structures */
+ memset(hmcs, 0, sizeof(struct ibmvmc_hmc) * MAX_HMCS);
+ for (i = 0; i < MAX_HMCS; i++) {
+ spin_lock_init(&hmcs[i].lock);
+ hmcs[i].state = ibmhmc_state_free;
+ for (j = 0; j < MAX_BUF_POOL_SIZE; j++)
+ hmcs[i].queue_outbound_msgs[j] = VMC_INVALID_BUFFER_ID;
+ }
+
+ /* Sanity check module parms */
+ ibmvmc_scrub_module_parms();
+
+ /*
+ * Initialize some reasonable values. Might be negotiated smaller
+ * values during the capabilities exchange.
+ */
+ ibmvmc.max_mtu = ibmvmc_max_mtu;
+ ibmvmc.max_buffer_pool_size = ibmvmc_max_buf_pool_size;
+ ibmvmc.max_hmc_index = ibmvmc_max_hmcs - 1;
+
+ rc = vio_register_driver(&ibmvmc_driver);
+
+ if (rc) {
+ pr_err("ibmvmc: rc %d from vio_register_driver\n", rc);
+ goto vio_reg_failed;
+ }
+
+ return 0;
+
+vio_reg_failed:
+ misc_deregister(&ibmvmc_miscdev);
+misc_register_failed:
+ return rc;
+}
+
+static void __exit ibmvmc_module_exit(void)
+{
+ pr_info("ibmvmc: module exit\n");
+ vio_unregister_driver(&ibmvmc_driver);
+ misc_deregister(&ibmvmc_miscdev);
+}
+
+module_init(ibmvmc_module_init);
+module_exit(ibmvmc_module_exit);
+
+module_param_named(buf_pool_size, ibmvmc_max_buf_pool_size,
+ int, 0644);
+MODULE_PARM_DESC(buf_pool_size, "Buffer pool size");
+module_param_named(max_hmcs, ibmvmc_max_hmcs, int, 0644);
+MODULE_PARM_DESC(max_hmcs, "Max HMCs");
+module_param_named(max_mtu, ibmvmc_max_mtu, int, 0644);
+MODULE_PARM_DESC(max_mtu, "Max MTU");
+
+MODULE_AUTHOR("Steven Royer <seroyer at linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM VMC");
+MODULE_VERSION(IBMVMC_DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/ibmvmc.h b/drivers/misc/ibmvmc.h
new file mode 100644
index 0000000..e140ada
--- /dev/null
+++ b/drivers/misc/ibmvmc.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * linux/drivers/misc/ibmvmc.h
+ *
+ * IBM Power Systems Virtual Management Channel Support.
+ *
+ * Copyright (c) 2004, 2018 IBM Corp.
+ * Dave Engebretsen engebret at us.ibm.com
+ * Steven Royer seroyer at linux.vnet.ibm.com
+ * Adam Reznechek adreznec at linux.vnet.ibm.com
+ * Bryant G. Ly <bryantly at linux.vnet.ibm.com>
+ */
+#ifndef IBMVMC_H
+#define IBMVMC_H
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+
+#include <asm/vio.h>
+
+#define IBMVMC_PROTOCOL_VERSION 0x0101
+
+#define MIN_BUF_POOL_SIZE 16
+#define MIN_HMCS 1
+#define MIN_MTU 4096
+#define MAX_BUF_POOL_SIZE 64
+#define MAX_HMCS 2
+#define MAX_MTU (4 * 4096)
+#define DEFAULT_BUF_POOL_SIZE 32
+#define DEFAULT_HMCS 1
+#define DEFAULT_MTU 4096
+#define HMC_ID_LEN 32
+
+#define VMC_INVALID_BUFFER_ID 0xFFFF
+
+/* ioctl numbers */
+#define VMC_BASE 0xCC
+#define VMC_IOCTL_SETHMCID _IOW(VMC_BASE, 0x00, unsigned char *)
+#define VMC_IOCTL_QUERY _IOR(VMC_BASE, 0x01, struct ibmvmc_query_struct)
+#define VMC_IOCTL_REQUESTVMC _IOR(VMC_BASE, 0x02, u32)
+
+#define VMC_MSG_CAP 0x01
+#define VMC_MSG_CAP_RESP 0x81
+#define VMC_MSG_OPEN 0x02
+#define VMC_MSG_OPEN_RESP 0x82
+#define VMC_MSG_CLOSE 0x03
+#define VMC_MSG_CLOSE_RESP 0x83
+#define VMC_MSG_ADD_BUF 0x04
+#define VMC_MSG_ADD_BUF_RESP 0x84
+#define VMC_MSG_REM_BUF 0x05
+#define VMC_MSG_REM_BUF_RESP 0x85
+#define VMC_MSG_SIGNAL 0x06
+
+#define VMC_MSG_SUCCESS 0
+#define VMC_MSG_INVALID_HMC_INDEX 1
+#define VMC_MSG_INVALID_BUFFER_ID 2
+#define VMC_MSG_CLOSED_HMC 3
+#define VMC_MSG_INTERFACE_FAILURE 4
+#define VMC_MSG_NO_BUFFER 5
+
+#define VMC_BUF_OWNER_ALPHA 0
+#define VMC_BUF_OWNER_HV 1
+
+enum ibmvmc_states {
+ ibmvmc_state_sched_reset = -1,
+ ibmvmc_state_initial = 0,
+ ibmvmc_state_crqinit = 1,
+ ibmvmc_state_capabilities = 2,
+ ibmvmc_state_ready = 3,
+ ibmvmc_state_failed = 4,
+};
+
+enum ibmhmc_states {
+ /* HMC connection not established */
+ ibmhmc_state_free = 0,
+
+ /* HMC connection established (open called) */
+ ibmhmc_state_initial = 1,
+
+ /* open msg sent to HV, due to ioctl(1) call */
+ ibmhmc_state_opening = 2,
+
+ /* HMC connection ready, open resp msg from HV */
+ ibmhmc_state_ready = 3,
+
+ /* HMC connection failure */
+ ibmhmc_state_failed = 4,
+};
+
+struct ibmvmc_buffer {
+ u8 valid; /* 1 when DMA storage allocated to buffer */
+ u8 free; /* 1 when buffer available for the Alpha Partition */
+ u8 owner;
+ u16 id;
+ u32 size;
+ u32 msg_len;
+ dma_addr_t dma_addr_local;
+ dma_addr_t dma_addr_remote;
+ void *real_addr_local;
+};
+
+struct ibmvmc_admin_crq_msg {
+ u8 valid; /* RPA Defined */
+ u8 type; /* ibmvmc msg type */
+ u8 status; /* Response msg status. Zero is success and on failure,
+ * either 1 - General Failure, or 2 - Invalid Version is
+ * returned.
+ */
+ u8 rsvd[2];
+ u8 max_hmc; /* Max # of independent HMC connections supported */
+ __be16 pool_size; /* Maximum number of buffers supported per HMC
+ * connection
+ */
+ __be32 max_mtu; /* Maximum message size supported (bytes) */
+ __be16 crq_size; /* # of entries available in the CRQ for the
+ * source partition. The target partition must
+ * limit the number of outstanding messages to
+ * one half or less.
+ */
+ __be16 version; /* Indicates the code level of the management partition
+ * or the hypervisor with the high-order byte
+ * indicating a major version and the low-order byte
+ * indicating a minor version.
+ */
+};
+
+struct ibmvmc_crq_msg {
+ u8 valid; /* RPA Defined */
+ u8 type; /* ibmvmc msg type */
+ u8 status; /* Response msg status */
+ union {
+ u8 rsvd; /* Reserved */
+ u8 owner;
+ } var1;
+ u8 hmc_session; /* Session Identifier for the current VMC connection */
+ u8 hmc_index; /* A unique HMC Idx would be used if multiple management
+ * applications running concurrently were desired
+ */
+ union {
+ __be16 rsvd;
+ __be16 buffer_id;
+ } var2;
+ __be32 rsvd;
+ union {
+ __be32 rsvd;
+ __be32 lioba;
+ __be32 msg_len;
+ } var3;
+};
+
+/* an RPA command/response transport queue */
+struct crq_queue {
+ struct ibmvmc_crq_msg *msgs;
+ int size, cur;
+ dma_addr_t msg_token;
+ spinlock_t lock;
+};
+
+/* VMC server adapter settings */
+struct crq_server_adapter {
+ struct device *dev;
+ struct crq_queue queue;
+ u32 liobn;
+ u32 riobn;
+ struct tasklet_struct work_task;
+ wait_queue_head_t reset_wait_queue;
+ struct task_struct *reset_task;
+};
+
+/* Driver wide settings */
+struct ibmvmc_struct {
+ u32 state;
+ u32 max_mtu;
+ u32 max_buffer_pool_size;
+ u32 max_hmc_index;
+ struct crq_server_adapter *adapter;
+ struct cdev cdev;
+ u32 vmc_drc_index;
+};
+
+struct ibmvmc_file_session;
+
+/* Connection specific settings */
+struct ibmvmc_hmc {
+ u8 session;
+ u8 index;
+ u32 state;
+ struct crq_server_adapter *adapter;
+ spinlock_t lock;
+ unsigned char hmc_id[HMC_ID_LEN];
+ struct ibmvmc_buffer buffer[MAX_BUF_POOL_SIZE];
+ unsigned short queue_outbound_msgs[MAX_BUF_POOL_SIZE];
+ int queue_head, queue_tail;
+ struct ibmvmc_file_session *file_session;
+};
+
+struct ibmvmc_file_session {
+ struct file *file;
+ struct ibmvmc_hmc *hmc;
+ bool valid;
+};
+
+struct ibmvmc_query_struct {
+ int have_vmc;
+ int state;
+ int vmc_drc_index;
+};
+
+#endif /* __IBMVMC_H */
--
2.7.2
More information about the Linuxppc-dev
mailing list