[PATCH 3/5] powerpc/boot: Remove support for Marvell mv64x60 i2c controller

Dale Farnsworth dalefarns at gmail.com
Sat Apr 7 02:37:04 AEST 2018


Acked-by: Dale Farnsworth <dale at farnsworth.org>

On Thu, Apr 5, 2018 at 6:17 PM, Mark Greer <mgreer at animalcreek.com> wrote:

> There are no longer any platforms that use Marvell's mv64x60's i2c
> controller so remove its driver.
>
> Signed-off-by: Mark Greer <mgreer at animalcreek.com>
> ---
>  arch/powerpc/boot/Makefile      |   2 +-
>  arch/powerpc/boot/mv64x60_i2c.c | 204 ------------------------------
> ----------
>  2 files changed, 1 insertion(+), 205 deletions(-)
>  delete mode 100644 arch/powerpc/boot/mv64x60_i2c.c
>
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 58f2dbfba275..bf6a46055ba7 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -120,7 +120,7 @@ src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
>  src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
>  src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
>  src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
> -src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c
> fsl-soc.c
> +src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c ugecon.c fsl-soc.c
>  src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c
>  src-wlib-$(CONFIG_CPM) += cpm-serial.c
>
> diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_
> i2c.c
> deleted file mode 100644
> index 52a3212b6638..000000000000
> --- a/arch/powerpc/boot/mv64x60_i2c.c
> +++ /dev/null
> @@ -1,204 +0,0 @@
> -/*
> - * Bootloader version of the i2c driver for the MV64x60.
> - *
> - * Author: Dale Farnsworth <dfarnsworth at mvista.com>
> - * Maintained by: Mark A. Greer <mgreer at mvista.com>
> - *
> - * 2003, 2007 (c) MontaVista, Software, Inc.  This file is licensed under
> - * the terms of the GNU General Public License version 2.  This program is
> - * licensed "as is" without any warranty of any kind, whether express or
> - * implied.
> - */
> -
> -#include <stdarg.h>
> -#include <stddef.h>
> -#include "types.h"
> -#include "elf.h"
> -#include "page.h"
> -#include "string.h"
> -#include "stdio.h"
> -#include "io.h"
> -#include "ops.h"
> -#include "mv64x60.h"
> -
> -/* Register defines */
> -#define MV64x60_I2C_REG_SLAVE_ADDR                     0x00
> -#define MV64x60_I2C_REG_DATA                           0x04
> -#define MV64x60_I2C_REG_CONTROL                                0x08
> -#define MV64x60_I2C_REG_STATUS                         0x0c
> -#define MV64x60_I2C_REG_BAUD                           0x0c
> -#define MV64x60_I2C_REG_EXT_SLAVE_ADDR                 0x10
> -#define MV64x60_I2C_REG_SOFT_RESET                     0x1c
> -
> -#define MV64x60_I2C_CONTROL_ACK                                0x04
> -#define MV64x60_I2C_CONTROL_IFLG                       0x08
> -#define MV64x60_I2C_CONTROL_STOP                       0x10
> -#define MV64x60_I2C_CONTROL_START                      0x20
> -#define MV64x60_I2C_CONTROL_TWSIEN                     0x40
> -#define MV64x60_I2C_CONTROL_INTEN                      0x80
> -
> -#define MV64x60_I2C_STATUS_BUS_ERR                     0x00
> -#define MV64x60_I2C_STATUS_MAST_START                  0x08
> -#define MV64x60_I2C_STATUS_MAST_REPEAT_START           0x10
> -#define MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK            0x18
> -#define MV64x60_I2C_STATUS_MAST_WR_ADDR_NO_ACK         0x20
> -#define MV64x60_I2C_STATUS_MAST_WR_ACK                 0x28
> -#define MV64x60_I2C_STATUS_MAST_WR_NO_ACK              0x30
> -#define MV64x60_I2C_STATUS_MAST_LOST_ARB               0x38
> -#define MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK            0x40
> -#define MV64x60_I2C_STATUS_MAST_RD_ADDR_NO_ACK         0x48
> -#define MV64x60_I2C_STATUS_MAST_RD_DATA_ACK            0x50
> -#define MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK         0x58
> -#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_ACK          0xd0
> -#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK       0xd8
> -#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_ACK          0xe0
> -#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK       0xe8
> -#define MV64x60_I2C_STATUS_NO_STATUS                   0xf8
> -
> -static u8 *ctlr_base;
> -
> -static int mv64x60_i2c_wait_for_status(int wanted)
> -{
> -       int i;
> -       int status;
> -
> -       for (i=0; i<1000; i++) {
> -               udelay(10);
> -               status = in_le32((u32 *)(ctlr_base +
> MV64x60_I2C_REG_STATUS))
> -                       & 0xff;
> -               if (status == wanted)
> -                       return status;
> -       }
> -       return -status;
> -}
> -
> -static int mv64x60_i2c_control(int control, int status)
> -{
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control &
> 0xff);
> -       return mv64x60_i2c_wait_for_status(status);
> -}
> -
> -static int mv64x60_i2c_read_byte(int control, int status)
> -{
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control &
> 0xff);
> -       if (mv64x60_i2c_wait_for_status(status) < 0)
> -               return -1;
> -       return in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA)) & 0xff;
> -}
> -
> -static int mv64x60_i2c_write_byte(int data, int control, int status)
> -{
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA), data & 0xff);
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control &
> 0xff);
> -       return mv64x60_i2c_wait_for_status(status);
> -}
> -
> -int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
> -                u32 count)
> -{
> -       int i;
> -       int data;
> -       int control;
> -       int status;
> -
> -       if (ctlr_base == NULL)
> -               return -1;
> -
> -       /* send reset */
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SOFT_RESET), 0);
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SLAVE_ADDR), 0);
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_EXT_SLAVE_ADDR), 0);
> -       out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_BAUD), (4 << 3) |
> 0x4);
> -
> -       if (mv64x60_i2c_control(MV64x60_I2C_CONTROL_TWSIEN,
> -                               MV64x60_I2C_STATUS_NO_STATUS) < 0)
> -               return -1;
> -
> -       /* send start */
> -       control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_MAST_START;
> -       if (mv64x60_i2c_control(control, status) < 0)
> -               return -1;
> -
> -       /* select device for writing */
> -       data = devaddr & ~0x1;
> -       control = MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK;
> -       if (mv64x60_i2c_write_byte(data, control, status) < 0)
> -               return -1;
> -
> -       /* send offset of data */
> -       control = MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_MAST_WR_ACK;
> -       if (offset_size > 1) {
> -               if (mv64x60_i2c_write_byte(offset >> 8, control, status) <
> 0)
> -                       return -1;
> -       }
> -       if (mv64x60_i2c_write_byte(offset, control, status) < 0)
> -               return -1;
> -
> -       /* resend start */
> -       control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_MAST_REPEAT_START;
> -       if (mv64x60_i2c_control(control, status) < 0)
> -               return -1;
> -
> -       /* select device for reading */
> -       data = devaddr | 0x1;
> -       control = MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK;
> -       if (mv64x60_i2c_write_byte(data, control, status) < 0)
> -               return -1;
> -
> -       /* read all but last byte of data */
> -       control = MV64x60_I2C_CONTROL_ACK | MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_MAST_RD_DATA_ACK;
> -
> -       for (i=1; i<count; i++) {
> -               data = mv64x60_i2c_read_byte(control, status);
> -               if (data < 0) {
> -                       printf("errors on iteration %d\n", i);
> -                       return -1;
> -               }
> -               *buf++ = data;
> -       }
> -
> -       /* read last byte of data */
> -       control = MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK;
> -       data = mv64x60_i2c_read_byte(control, status);
> -       if (data < 0)
> -               return -1;
> -       *buf++ = data;
> -
> -       /* send stop */
> -       control = MV64x60_I2C_CONTROL_STOP | MV64x60_I2C_CONTROL_TWSIEN;
> -       status = MV64x60_I2C_STATUS_NO_STATUS;
> -       if (mv64x60_i2c_control(control, status) < 0)
> -               return -1;
> -
> -       return count;
> -}
> -
> -int mv64x60_i2c_open(void)
> -{
> -       u32 v;
> -       void *devp;
> -
> -       devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c");
> -       if (devp == NULL)
> -               goto err_out;
> -       if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
> -               goto err_out;
> -
> -       ctlr_base = (u8 *)v;
> -       return 0;
> -
> -err_out:
> -       return -1;
> -}
> -
> -void mv64x60_i2c_close(void)
> -{
> -       ctlr_base = NULL;
> -}
> --
> 2.16.2
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20180406/b9088a3d/attachment.html>


More information about the Linuxppc-dev mailing list