[PATCH] ASoC: fsl_ssi: Override bit clock rate based on slot number

[Łukasz Majewski]

Hi Nicolin,

> On Thu, Sep 07, 2017 at 10:23:43PM -0700, Nicolin Chen wrote:
>> The set_sysclk() now is used to override the output bit clock rate.
>> But this is not a common way to implement a set_dai_sysclk(). And
>> this creates a problem when a general machine driver (simple-card
>> for example) tries to do set_dai_sysclk() by passing an input clock
>> rate for the baud clock instead of setting the bit clock rate as
>> fsl_ssi driver expected.
>>
>> So this patch solves this problem by firstly removing set_sysclk()
>> since the hw_params() can calculate the bit clock rate. Secondly,
>> in order not to break those TDM use cases which previously might
>> have been using set_sysclk() to override the bit clock rate, this
>> patch changes the driver to override it based on the slot number.
>>
>> The patch also removes an obsolete comment of the dir parameter.
>>
>> Signed-off-by: Nicolin Chen <nicoleotsuka at gmail.com>
> 
> Forgot to mention, I think that it's better to wait for a couple of
> Tested-by from those who use the TDM mode of SSI before applying it.

Although, I'm not the PCM user, I've tested your patch and it works :-)

Tested-by: Łukasz Majewski <lukma at denx.de>

Test HW: imx6q + tfa9879 codec

> 
> Thanks
> Nicolin
> 


-- 
Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de