[PATCH] sound: soc: fsl: Do not set DAI sysclk when it is equal to system freq

Łukasz Majewski lukma at denx.de
Thu Sep 7 04:35:50 AEST 2017


Hi Nicolin,

> On Wed, Sep 06, 2017 at 11:22:48AM +0200, Łukasz Majewski wrote:
> 
>>> Here is the routine that I understood from the code:
>>> 1) asoc_simple_card_parse_clk_cpu(dev, cpu, dai_link, cpu_dai);
>>>     => asoc_simple_card_parse_clk(dev, cpu,        // cpu node in sound{} [1]
>>> 		   		 dai_link->cpu_of_node,     // node ssi2 [2]
>>> 				 cpu_dai, dai_link->cpu_dai_name);
>>>     ==> 1.1) devm_get_clk_from_child(dev, node, NULL);                 // [1]
>>>     ==> 1.2) of_property_read_u32(node, "system-clock-frequency", &val)// [1]
>>>     ==> 1.3) devm_get_clk_from_child(dev, dai_of_node, NULL);          // [2]
> 
>>> For the cpu routine, it first checks for clock property under cpu
>>> node of simple-card, then for "system-clock-frequency" in the cpu
>>> node of simple-card, and finally looks for clock property in ssi2
>>> node.
> 
>> -----> dev: sound
>> -----> clk node: /soc/aips-bus at 02000000/spba-bus at 02000000/ssi at 0202c000
>> -----> Clk asignment
>>
>> And this clock is taken from this node. It looks like ipg clock for ssi...
> 
> This makes sense now. The devm_get_clk_from_child() in 1.3) fetched
> the first clock of ssi2 -- ipg clock.

Yes, exactly (for SSI2) [1]:

	clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
		 <&clks IMX6QDL_CLK_SSI2>;
	clock-names = "ipg", "baud";


> 
>> The problem is with the "lack" of clock nodes/properties at
>>
>>   			dailink_master: cpu {
>>   			    sound-dai = <&ssi2>;
>> 			    clock = <&SSSS>;

	If possible I do prefer a solution, which uses only DTS.
	
Side question - how to refer to baud clock from [1]?


>> 			    system-clock-frequency = <XXXX>;
>>   			};
> 
> This is the right solution based on current simple-card driver. For
> SSI (having two clocks), you have to specify the baud clock in the
> cpu node like that. I believe this is what the simple-card designer
> expected users to do since the cpu node is the first place that the
> driver tries to look at.

I will give a shoot the option with adding the ipg clock.

> 
>> I think that the proper solution would be to add check for:
>>
>> freq < sysclk/5 in fsl_ssi_set_dai_sysclk() and return -ENOTSUPP to
>> make the simple-audo-card driver happy (and not introducing
>> regressions).
> 
> As I said in the first place, adding another check in set_sysclk()
> is not that essential but seems to be plausible to me. So I am okay
> if you really want to have that.
> 

Thanks for help.

-- 
Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de


More information about the Linuxppc-dev mailing list