Machine Check in P2010(e500v2)

[Laurentiu Tudor]

Hi Jocke,

On 09/01/2017 02:32 PM, Joakim Tjernlund wrote:
> I am trying to debug a Machine Check for a P2010 (e500v2) CPU:
>
> [   28.111816] Caused by (from MCSR=10008): Bus - Read Data Bus Error
> [   28.117998] Oops: Machine check, sig: 7 [#1]
> [   28.122263] P1010 RDB
> [   28.124529] Modules linked in: linux_bcm_knet(PO) linux_user_bde(PO) linux_kernel_bde(PO)
> [   28.132718] CPU: 0 PID: 470 Comm: emxp2_hw_bl Tainted: P           O    4.1.38+ #49
> [   28.140376] task: db16cd10 ti: df128000 task.ti: df128000
> [   28.145770] NIP: 00000000 LR: 10a4e404 CTR: 10046c38
> [   28.150730] REGS: df129f10 TRAP: 0204   Tainted: P           O     (4.1.38+)
> [   28.157776] MSR: 0002d000 <CE,EE,PR,ME>  CR: 44002428  XER: 00000000
> [   28.164140] DEAR: b7187000 ESR: 00000000
> GPR00: 10a4e404 bf86ea30 b7ca94a0 132f9fa8 07006000 07000000 00000000 132f9fd8
> GPR08: b7149000 b7159000 0003e000 bf86ea20 24004424 11d6cf7c 00000000 00000000
> GPR16: 10f6e29c 10f6c872 10f6db01 0000b541 0000b541 11d92fcc 00000011 00000001
> GPR24: 01a4d12d 132ffbf0 11d60000 00000000 07006000 00000000 132f9fa8 00000000
> [   28.196375] NIP [00000000]   (null)
> [   28.199859] LR [10a4e404] 0x10a4e404
> [   28.203426] Call Trace:
> [   28.205866] ---[ end trace f456255ddf9bee83 ]---
>
> I cannot figure out why NIP is NULL ? It LOOKs like NIP is set to
> MCSRR0 early on but maybe it is lost somehow?
>
> Anyhow, looking at entry_32.S:
> 	.globl	mcheck_transfer_to_handler
> mcheck_transfer_to_handler:
> 	mfspr	r0,SPRN_DSRR0
> 	stw	r0,_DSRR0(r11)
> 	mfspr	r0,SPRN_DSRR1
> 	stw	r0,_DSRR1(r11)
> 	/* fall through */
>
> 	.globl	debug_transfer_to_handler
> debug_transfer_to_handler:
> 	mfspr	r0,SPRN_CSRR0
> 	stw	r0,_CSRR0(r11)
> 	mfspr	r0,SPRN_CSRR1
> 	stw	r0,_CSRR1(r11)
> 	/* fall through */
>
> 	.globl	crit_transfer_to_handler
> crit_transfer_to_handler:
>
> It looks odd that DSRRx is assigned in mcheck and CSRRx in debug and
> crit has none. Should not this assigment be shifted down one level?
>

This does indeed looks weird. Have you tried moving the SPRN_CSRR* 
saving in the crit section? Any results?

---
Best Regards, Laurentiu