[PATCH v4 00/10] Allow opal-async waiters to get interrupted

[Boris Brezillon]

On Tue, 10 Oct 2017 14:32:52 +1100
Cyril Bur <cyrilbur at gmail.com> wrote:

> V4: Rework and rethink.
> 
> To recap:
> Userspace MTD read()s/write()s and erases to powernv_flash become
> calls into the OPAL firmware which subsequently handles flash access.
> Because the read()s, write()s or erases can be large (bounded of
> course my the size of flash) OPAL may take some time to service the
> request, this causes the powernv_flash driver to sit in a wait_event()
> for potentially minutes. This causes two problems, firstly, tools
> appear to hang for the entire time as they cannot be interrupted by
> signals and secondly, this can trigger hung task warnings. The correct
> solution is to use wait_event_interruptible() which my rework (as part
> of this series) of the opal-async infrastructure provides.
> 
> The final patch in this series achieves this. It should eliminate both
> hung tasks and threads locking up.
> 
> Included in this series are other simpler fixes for powernv_flash:
> 
> Don't always return EIO on error. OPAL does mutual exclusion on the
> flash and also knows when the service processor takes control of the
> flash, in both of these cases it will return OPAL_BUSY, translating
> this to EIO is misleading to userspace.
> 
> Handle receiving OPAL_SUCCESS when it expects OPAL_ASYNC_COMPLETION
> and don't treat it as an error. Unfortunately there are too many drivers
> out there with the incorrect behaviour so this means OPAL can never
> return anything but OPAL_ASYNC_COMPLETION, this shouldn't prevent the
> code from being correct.
> 
> Don't return ERESTARTSYS if token acquisition is interrupted as
> powernv_flash can't be sure it hasn't already performed some work, let
> userspace deal with the problem.
> 
> Change the incorrect use of BUG_ON() to WARN_ON() in powernv_flash.
> 
> Not for powernv_flash, a fix from Stewart Smith which fits into this
> series as it relies on my improvements to the opal-async
> infrastructure.
> 
> V3: export opal_error_code() so that powernv_flash can be built=m
> 
> Hello,
> 
> Version one of this series ignored that OPAL may continue to use
> buffers passed to it after Linux kfree()s the buffer. This version
> addresses this, not in a particularly nice way - future work could
> make this better. This version also includes a few cleanups and fixups
> to powernv_flash driver one along the course of this work that I
> thought I would just send.
> 
> The problem we're trying to solve here is that currently all users of
> the opal-async calls must use wait_event(), this may be undesirable
> when there is a userspace process behind the request for the opal
> call, if OPAL takes too long to complete the call then hung task
> warnings will appear.
> 
> In order to solve the problem callers should use
> wait_event_interruptible(), due to the interruptible nature of this
> call the opal-async infrastructure needs to track extra state
> associated with each async token, this is prepared for in patch 6/10.
> 
> While I was working on the opal-async infrastructure improvements
> Stewart fixed another problem and he relies on the corrected behaviour
> of opal-async so I've sent it here.
> 
> Hello MTD folk, traditionally Michael Ellerman takes powernv_flash
> driver patches through the powerpc tree, as always your feedback is
> very welcome.

Just gave my acks on patches 1 to 4 and patch 10 (with minor comments
on patch 3 and 10). Feel free to take the patches directly through the
powerpc tree.

> 
> Thanks,
> 
> Cyril
> 
> Cyril Bur (9):
>   mtd: powernv_flash: Use WARN_ON_ONCE() rather than BUG_ON()
>   mtd: powernv_flash: Don't treat OPAL_SUCCESS as an error
>   mtd: powernv_flash: Remove pointless goto in driver init
>   mtd: powernv_flash: Don't return -ERESTARTSYS on interrupted token
>     acquisition
>   powerpc/opal: Make __opal_async_{get,release}_token() static
>   powerpc/opal: Rework the opal-async interface
>   powerpc/opal: Add opal_async_wait_response_interruptible() to
>     opal-async
>   powerpc/powernv: Add OPAL_BUSY to opal_error_code()
>   mtd: powernv_flash: Use opal_async_wait_response_interruptible()
> 
> Stewart Smith (1):
>   powernv/opal-sensor: remove not needed lock
> 
>  arch/powerpc/include/asm/opal.h              |   4 +-
>  arch/powerpc/platforms/powernv/opal-async.c  | 183 +++++++++++++++++++--------
>  arch/powerpc/platforms/powernv/opal-sensor.c |  17 +--
>  arch/powerpc/platforms/powernv/opal.c        |   2 +
>  drivers/mtd/devices/powernv_flash.c          |  83 +++++++-----
>  5 files changed, 194 insertions(+), 95 deletions(-)
>