[PATCH] SB600 for the Nemo board has non-zero devices on non-root bus
Bjorn Helgaas
bhelgaas at google.com
Thu Nov 30 09:34:37 AEDT 2017
On Wed, Nov 29, 2017 at 2:45 PM, Christian Zigotzky
<chzigotzky at xenosoft.de> wrote:
> On 29 November 2017 at 8:46PM, Bjorn Helgaas wrote:
>>
>> On Wed, Nov 29, 2017 at 1:28 PM, Christian Zigotzky
>> <chzigotzky at xenosoft.de> wrote:
>>>
>>> On 23 November 2017 at 2:31PM, Michael Ellerman wrote:
>>>>
>>>> Hi Christian,
>>>>
>>>> Thanks for your patch.
>>>>
>>>> Christian Zigotzky <chzigotzky at xenosoft.de> writes:
>>>>>
>>>>> Hi All,
>>>>>
>>>>> Just a small patch for the P.A. Semi Nemo board:
>>>>>
>>>>> -----
>>>>>
>>>>> diff -rupN a/drivers/pci/probe.c b/drivers/pci/probe.c
>>>>> --- a/drivers/pci/probe.c 2017-11-16 08:18:40.504012010 +0100
>>>>> +++ b/drivers/pci/probe.c 2017-11-16 08:17:22.044368405 +0100
>>>>> @@ -2219,6 +2219,8 @@ static int only_one_child(struct pci_bus
>>>>
>>>> As this is a patch to the PCI code I can't merge it via the powerpc
>>>> tree. You would need to send it to linux-pci at vger.kernel.org.
>>>>
>>>>> if (!parent || !pci_is_pcie(parent))
>>>>> return 0;
>>>>> + #ifndef CONFIG_PPC_PASEMI_NEMO
>>>>> + // SB600 for the Nemo board has non-zero devices on non-root bus.
>>>>> if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT)
>>>>> return 1;
>>>>>
>>>>> @@ -2231,6 +2233,7 @@ static int only_one_child(struct pci_bus
>>>>> if (parent->has_secondary_link &&
>>>>> !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
>>>>> return 1;
>>>>> + #endif
>>>>
>>>> But the PCI maintainer is not going to accept a patch like this, which
>>>> adds a platform specific #ifdef in core code like this.
>>>>
>>>> If you look at the rest of that file I don't think you'll find a single
>>>> #ifdef other than for generic configuration symbols.
>>>>
>>>> Are you sure the PCI_SCAN_ALL_PCIE_DEVS logic doesn't work for you? It
>>>> sounds like it was added for exactly this problem.
>>>>
>>>> cheers
>>>>
>>> Hi Michael,
>>>
>>> Thanks for your reply. Sorry for my late answer. I removed the patch
>>> above
>>> from the RC1 and compiled the RC1 again. Unfortunately without the patch,
>>> the kernel doesn't recognize any drives and partitions. Do you have
>>> another
>>> idea?
>>
>> What happens if you boot RC1 with "pci=pcie_scan_all"? If that works,
>> we do have some quirks that set that automatically, and we might be
>> able to add another one for the Nemo.
>>
>> Can you collect the complete "lspci -vv" and dmesg output for this
>> system? I'm curious about why it is special.
>>
>> Bjorn
>>
> Hi Bjorn,
>
> Thank you for your answer. I have tried to boot the kernel 4.15 RC1 (built
> without the patch above) with the boot argument "pci=pcie_scan_all" but
> without any success.
>
> Just for info:
>
> The CPU is a PA Semi “PWRficient” PA6T-1682M. This device combines dual
> 1.8GHz PowerPC cores with a 2MB L2 cache, dual channel DDR2 memory
> controllers and 24 SerDes
> channels. The PowerPC cores adhere to the Power ISA v2.04, and support
> 64-bit extensions. They feature a double precision FPU and a VMX (AltiVec)
> vector unit. They each have a 64kB I-cache and a 64kB D-cache.
> The SerDes channels support PCI Express, XAUI and SGMII protocols. The
> “ENVOI” I/O subsystem which drives them includes caching, offload and DMA
> resources to maximise I/O
> performance.
> Nemo uses the AMD/ATI SB600 South Bridge to provide various integrated I/O
> functions including SATA/PATA ports, USB and audio. The SB600 connects to
> the CPU via a PCIe x4 link. This is termed an “A-link II Express” link by
> ATI/AMD. The design team determined early in the development of Nemo that
> the link’s behaviour as an endpoint does not comply fully with the PCI
> Express specification. Specifically, it requires the root complex to use
> non-zero device numbers in type 0 configuration cycles to enumerate all the
> devices within the SB600. This is related to the PC architecture and is used
> to allow SB600 devices appear on logical bus 0.
>
> More information about the Nemo board:
>
> https://en.wikipedia.org/wiki/AmigaOne_X1000
> http://www.a-eon.com/?page=x1000
> http://www.amigaos.net/hardware/35/amigaone-x1000
>
> Please find attached the complete "lspci -vv" and dmesg output.
Thanks. Can you collect the "lspci -vv" output as root? The one you
attached wasn't as root and doesn't include the PCI capability
information, which we need so we can tell which devices appear as
conventional PCI and which as PCIe.
It would also be helpful if you could send plain-text email because
the linux-pci list discards fancy email
(http://vger.kernel.org/majordomo-info.html#taboo).
It looks like the SB600 devices actually appear on bus 05 (not 00),
right? I see these devices (among others):
00:10.0 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port
00:11.0 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port
01:00.0 VGA compatible controller: [AMD/ATI] Barts XT [Radeon HD 6870]
05:12.0 SATA controller: [AMD/ATI] SB600 Non-Raid-5 SATA
05:14.4 PCI bridge: [AMD/ATI] SBx00 PCI to PCI Bridge
06:05.0 Ethernet controller: RTL-8100/8101L/8139
So 00:10.0 and 00:11.0 are bridges leading to buses 01 and 05-06.
Maybe 00:11.0 is the Downstream Port that leads to this magic "A-Link
II Express" thing?
But I don't think all those SB600 devices on bus 05 are PCIe devices.
It would certainly be unconventional to have a PCIe device (00:11.0)
at the upstream end of a link and conventional PCI devices (05:12.0,
05:13.0, 05:13.1, etc) at the downstream end, with no visible PCIe
port.
The usual thing would be that 00:11.0 would be a Root Port or a Switch
Downstream Port leading to a Link, and the other end of the Link would
terminate in either a Switch Upstream Port or an Upstream Port
embedded in an Endpoint.
We'll have to think about how to handle this. But the complete "lspci
-vv" output as root will have more useful information.
Bjorn
-------------- next part --------------
[ 0.000000] Allocated 4096 bytes for 2 pacas at c00000000ffff000
[ 0.000000] hash-mmu: Page sizes from device-tree:
[ 0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
[ 0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=3
[ 0.000000] hash-mmu: base_shift=20: shift=20, sllp=0x0030, avpnm=0x00000000, tlbiel=0, penc=31
[ 0.000000] hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12
[ 0.000000] Using 1TB segments
[ 0.000000] hash-mmu: Initializing hash mmu with SLB
[ 0.000000] Linux version 4.15.0-rc1_A-EON_AmigaOne_X1000_Nemo (christian at AmigaoneX1000) (gcc version 6.3.0 20170618 (Debian 6.3.0-19)) #1 SMP Mon Nov 27 09:04:52 CET 2017
[ 0.000000] IOBMAP L2 allocated at: c00000007fe00000
[ 0.000000] Using PA Semi PWRficient machine description
[ 0.000000] Found legacy serial port 0 for /pxp at 0,e0000000/serial at 1d
[ 0.000000] port=7f03f8, taddr=fcff03f8, irq=0, clk=133333333, speed=115200
[ 0.000000] Found legacy serial port 1 for /pxp at 0,e0000000/serial at 1d,1
[ 0.000000] port=7f02f8, taddr=fcff02f8, irq=0, clk=133333333, speed=115200
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] phys_mem_size = 0x200000000
[ 0.000000] dcache_bsize = 0x40
[ 0.000000] icache_bsize = 0x40
[ 0.000000] cpu_features = 0x0800020018500048
[ 0.000000] possible = 0xdf5fffff18500649
[ 0.000000] always = 0x0000000018100040
[ 0.000000] cpu_user_features = 0xdc000802 0x00000000
[ 0.000000] mmu_features = 0x6e000001
[ 0.000000] firmware_features = 0x0000000000000000
[ 0.000000] htab_address = 0xc000000278000000
[ 0.000000] htab_hash_mask = 0xfffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Found PA-PXP PCI host bridge.
[ 0.000000] PCI host bridge /pxp at 0,e0000000 (primary) ranges:
[ 0.000000] IO 0x00000000fc800000..0x00000000fcffffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x00000000e00fffff -> 0x0000000080000000
[ 0.000000] MEM 0x00000000fd800000..0x00000000fd800fff -> 0x00000000fd800000
[ 0.000000] MEM 0x0000080000000000..0x00000bffffffffff -> 0x0000080000000000
[ 0.000000] no ISA IO ranges or unexpected isa range, mapping 64k
[ 0.000000] ISA bridge (early) is /pxp at 0,e0000000/io-bridge at 0
[ 0.000000] Top of RAM: 0x280000000, Total RAM: 0x200000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] On node 0 totalpages: 2097152
[ 0.000000] DMA zone: 35840 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 2097152 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 27 pages/cpu @c00000026f200000 s71448 r0 d39144 u524288
[ 0.000000] pcpu-alloc: s71448 r0 d39144 u524288 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2061312
[ 0.000000] Kernel command line: root=/dev/sda4
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Memory: 8006352K/8388608K available (14984K kernel code, 2388K rwdata, 6988K rodata, 972K init, 1698K bss, 382256K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 36661 entries in 216 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] OpenPIC addr: fc000000
[ 0.000000] mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs
[ 0.000000] mpic: ISU size: 1024, shift: 10, mask: 3ff
[ 0.000000] mpic: Initializing for 1024 sources
[ 0.000000] Init i8259
[ 0.000000] i8259 legacy interrupt controller initialized
[ 0.000000] time_init: decrementer frequency = 66.666666 MHz
[ 0.000000] time_init: processor frequency = 1800.000000 MHz
[ 0.000004] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns
[ 0.000008] clocksource: timebase mult[f000003] shift[24] registered
[ 0.000012] clockevent: decrementer mult[1111110e] shift[32] cpu[0]
[ 0.000231] Console: colour dummy device 80x25
[ 0.000429] console [tty0] enabled
[ 0.000442] pid_max: default: 32768 minimum: 301
[ 0.000544] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000590] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000960] mpic: requesting IPIs...
[ 0.001214] Hierarchical SRCU implementation.
[ 0.001430] smp: Bringing up secondary CPUs ...
[ 0.001840] smp: Brought up 1 node, 2 CPUs
[ 0.002030] Using standard scheduler topology
[ 0.002309] devtmpfs: initialized
[ 0.004112] random: get_random_u32 called from .bucket_table_alloc+0x134/0x350 with crng_init=0
[ 0.004417] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.004433] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.004515] xor: measuring software checksum speed
[ 0.014094] 8regs : 3164.000 MB/sec
[ 0.024126] 8regs_prefetch: 3052.000 MB/sec
[ 0.034159] 32regs : 3516.000 MB/sec
[ 0.044191] 32regs_prefetch: 3100.000 MB/sec
[ 0.054226] altivec : 5752.000 MB/sec
[ 0.054233] xor: using function: altivec (5752.000 MB/sec)
[ 0.054324] NET: Registered protocol family 16
[ 0.054923] random: fast init done
[ 0.061205] PCI: Probing PCI hardware
[ 0.061502] PCI host bridge to bus 0000:00
[ 0.061517] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff])
[ 0.061528] pci_bus 0000:00: root bus resource [mem 0x80000000-0xe00fffff]
[ 0.061536] pci_bus 0000:00: root bus resource [mem 0xfd800000-0xfd800fff]
[ 0.061544] pci_bus 0000:00: root bus resource [mem 0x80000000000-0xbffffffffff]
[ 0.061553] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.061562] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.061565] pci_bus 0000:00: scanning bus
[ 0.061592] NEMO SB600 IOB base e0000000
[ 0.061620] pci 0000:00:00.0: [1959:a001] type 00 class 0x060000
[ 0.061633] pci 0000:00:00.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.061642] pci 0000:00:00.0: calling .quirk_mmio_always_on+0x0/0x40
[ 0.061665] pci 0000:00:00.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.061721] ISA bridge PCI attached: 0000:00:00.0
[ 0.061789] pci 0000:00:01.0: [1959:a009] type 00 class 0x058000
[ 0.061798] pci 0000:00:01.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.061824] pci 0000:00:01.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.061944] pci 0000:00:03.0: [1959:a00c] type 00 class 0x080080
[ 0.061953] pci 0000:00:03.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.061978] pci 0000:00:03.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.062086] pci 0000:00:04.0: [1959:a00a] type 00 class 0x050000
[ 0.062095] pci 0000:00:04.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.062121] pci 0000:00:04.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.062235] pci 0000:00:05.0: [1959:a00a] type 00 class 0x050000
[ 0.062244] pci 0000:00:05.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.062270] pci 0000:00:05.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.062401] pci 0000:00:08.0: [1959:a000] type 00 class 0x0b2000
[ 0.062409] pci 0000:00:08.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.062434] pci 0000:00:08.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.062541] pci 0000:00:09.0: [1959:a000] type 00 class 0x0b2000
[ 0.062549] pci 0000:00:09.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.062574] pci 0000:00:09.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.062690] pci 0000:00:10.0: [1959:a002] type 01 class 0x060400
[ 0.062704] pci 0000:00:10.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.062723] pci 0000:00:10.0: enabling Extended Tags
[ 0.062738] pci 0000:00:10.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.062767] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.062772] pci 0000:00:10.0: PME# disabled
[ 0.062890] pci 0000:00:10.1: [1959:a002] type 01 class 0x060400
[ 0.062903] pci 0000:00:10.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.062924] pci 0000:00:10.1: enabling Extended Tags
[ 0.062938] pci 0000:00:10.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.062965] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.062970] pci 0000:00:10.1: PME# disabled
[ 0.063087] pci 0000:00:10.2: [1959:a002] type 01 class 0x060400
[ 0.063100] pci 0000:00:10.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.063119] pci 0000:00:10.2: enabling Extended Tags
[ 0.063132] pci 0000:00:10.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.063160] pci 0000:00:10.2: PME# supported from D0 D3hot D3cold
[ 0.063164] pci 0000:00:10.2: PME# disabled
[ 0.063278] pci 0000:00:10.3: [1959:a002] type 01 class 0x060400
[ 0.063300] pci 0000:00:10.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.063319] pci 0000:00:10.3: enabling Extended Tags
[ 0.063332] pci 0000:00:10.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.063360] pci 0000:00:10.3: PME# supported from D0 D3hot D3cold
[ 0.063364] pci 0000:00:10.3: PME# disabled
[ 0.063476] pci 0000:00:11.0: [1959:a002] type 01 class 0x060400
[ 0.063490] pci 0000:00:11.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.063508] pci 0000:00:11.0: enabling Extended Tags
[ 0.063521] pci 0000:00:11.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.063548] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 0.063553] pci 0000:00:11.0: PME# disabled
[ 0.063661] pci 0000:00:11.1: [1959:a002] type 01 class 0x060400
[ 0.063675] pci 0000:00:11.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.063693] pci 0000:00:11.1: enabling Extended Tags
[ 0.063706] pci 0000:00:11.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.063733] pci 0000:00:11.1: PME# supported from D0 D3hot D3cold
[ 0.063737] pci 0000:00:11.1: PME# disabled
[ 0.063849] pci 0000:00:11.2: [1959:a002] type 01 class 0x060400
[ 0.063862] pci 0000:00:11.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.063880] pci 0000:00:11.2: enabling Extended Tags
[ 0.063894] pci 0000:00:11.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.063923] pci 0000:00:11.2: PME# supported from D0 D3hot D3cold
[ 0.063928] pci 0000:00:11.2: PME# disabled
[ 0.064039] pci 0000:00:11.3: [1959:a002] type 01 class 0x060400
[ 0.064053] pci 0000:00:11.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.064071] pci 0000:00:11.3: enabling Extended Tags
[ 0.064085] pci 0000:00:11.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.064112] pci 0000:00:11.3: PME# supported from D0 D3hot D3cold
[ 0.064116] pci 0000:00:11.3: PME# disabled
[ 0.064246] pci 0000:00:14.0: [1959:a005] type 00 class 0x020000
[ 0.064254] pci 0000:00:14.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.064280] pci 0000:00:14.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.064397] pci 0000:00:14.1: [1959:a005] type 00 class 0x020000
[ 0.064405] pci 0000:00:14.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.064432] pci 0000:00:14.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.064536] pci 0000:00:14.2: [1959:a005] type 00 class 0x020000
[ 0.064544] pci 0000:00:14.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.064570] pci 0000:00:14.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.064666] pci 0000:00:14.3: [1959:a005] type 00 class 0x020000
[ 0.064674] pci 0000:00:14.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.064700] pci 0000:00:14.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.064811] pci 0000:00:15.0: [1959:a006] type 00 class 0x020000
[ 0.064819] pci 0000:00:15.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.064845] pci 0000:00:15.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.064955] pci 0000:00:15.1: [1959:a006] type 00 class 0x020000
[ 0.064963] pci 0000:00:15.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.064989] pci 0000:00:15.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.065096] pci 0000:00:1a.0: [1959:a007] type 00 class 0x0801ff
[ 0.065105] pci 0000:00:1a.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.065128] pci 0000:00:1a.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.065244] pci 0000:00:1b.0: [1959:a00b] type 00 class 0x088000
[ 0.065254] pci 0000:00:1b.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.065279] pci 0000:00:1b.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.065399] pci 0000:00:1c.0: [1959:a003] type 00 class 0x0c0500
[ 0.065407] pci 0000:00:1c.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.065419] pci 0000:00:1c.0: reg 0x10: [io 0x800200-0x80023f]
[ 0.065441] pci 0000:00:1c.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.065541] pci 0000:00:1c.1: [1959:a003] type 00 class 0x0c0500
[ 0.065549] pci 0000:00:1c.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.065560] pci 0000:00:1c.1: reg 0x10: [io 0x800240-0x80027f]
[ 0.065583] pci 0000:00:1c.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.065687] pci 0000:00:1c.2: [1959:a003] type 00 class 0x0c0500
[ 0.065695] pci 0000:00:1c.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.065705] pci 0000:00:1c.2: reg 0x10: [io 0x800280-0x8002bf]
[ 0.065728] pci 0000:00:1c.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.065835] pci 0000:00:1d.0: [1959:a004] type 00 class 0x070003
[ 0.065843] pci 0000:00:1d.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.065854] pci 0000:00:1d.0: reg 0x10: [io 0x8003f8-0x8003ff]
[ 0.065876] pci 0000:00:1d.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.065976] pci 0000:00:1d.1: [1959:a004] type 00 class 0x070003
[ 0.065984] pci 0000:00:1d.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.065995] pci 0000:00:1d.1: reg 0x10: [io 0x8002f8-0x8002ff]
[ 0.066018] pci 0000:00:1d.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.066133] pci 0000:00:1e.0: [1959:a008] type 00 class 0x0601ff
[ 0.066141] pci 0000:00:1e.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.066152] pci 0000:00:1e.0: reg 0x10: [io 0x800400-0x8004ff]
[ 0.066158] pci 0000:00:1e.0: reg 0x14: [io 0x800500-0x8005ff]
[ 0.066178] pci 0000:00:1e.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.066270] pci_bus 0000:00: fixups for bus
[ 0.108867] IOMMU table initialized, virtual merging enabled
[ 0.109242] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.109364] pci_bus 0000:01: scanning bus
[ 0.109388] pci 0000:01:00.0: [1002:6738] type 00 class 0x030000
[ 0.109404] pci 0000:01:00.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.109423] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.109434] pci 0000:01:00.0: reg 0x18: [mem 0xa0020000-0xa003ffff 64bit]
[ 0.109442] pci 0000:01:00.0: reg 0x20: [io 0x12000-0x120ff]
[ 0.109455] pci 0000:01:00.0: reg 0x30: [mem 0xa0000000-0xa001ffff pref]
[ 0.109464] pci 0000:01:00.0: enabling Extended Tags
[ 0.109480] pci 0000:01:00.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.109488] pci 0000:01:00.0: calling .quirk_no_pm_reset+0x0/0x50
[ 0.109544] pci 0000:01:00.0: supports D1 D2
[ 0.109668] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
[ 0.109682] pci 0000:01:00.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.109698] pci 0000:01:00.1: reg 0x10: [mem 0xa0040000-0xa0043fff 64bit]
[ 0.109728] pci 0000:01:00.1: enabling Extended Tags
[ 0.109744] pci 0000:01:00.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.109780] pci 0000:01:00.1: supports D1 D2
[ 0.112559] pci_bus 0000:01: fixups for bus
[ 0.112564] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.112577] pci 0000:00:10.0: bridge window [io 0x12000-0x12fff]
[ 0.112582] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.112640] pci_bus 0000:01: bus scan returning with max=01
[ 0.112647] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 0
[ 0.112726] pci_bus 0000:02: scanning bus
[ 0.112751] pci_bus 0000:02: fixups for bus
[ 0.112755] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.112770] pci_bus 0000:02: bus scan returning with max=02
[ 0.112776] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 0
[ 0.112852] pci_bus 0000:03: scanning bus
[ 0.112877] pci_bus 0000:03: fixups for bus
[ 0.112881] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.112896] pci_bus 0000:03: bus scan returning with max=03
[ 0.112902] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 0
[ 0.112976] pci_bus 0000:04: scanning bus
[ 0.113001] pci_bus 0000:04: fixups for bus
[ 0.113005] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.113020] pci_bus 0000:04: bus scan returning with max=04
[ 0.113026] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 0
[ 0.113106] pci_bus 0000:05: scanning bus
[ 0.113152] pci 0000:05:12.0: [1002:4380] type 00 class 0x01018f
[ 0.113164] pci 0000:05:12.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.113171] pci 0000:05:12.0: calling .quirk_no_ata_d3+0x0/0x40
[ 0.113189] pci 0000:05:12.0: reg 0x10: [io 0x11040-0x11047]
[ 0.113199] pci 0000:05:12.0: reg 0x14: [io 0x1105c-0x1105f]
[ 0.113209] pci 0000:05:12.0: reg 0x18: [io 0x11048-0x1104f]
[ 0.113219] pci 0000:05:12.0: reg 0x1c: [io 0x11058-0x1105b]
[ 0.113229] pci 0000:05:12.0: reg 0x20: [io 0x11010-0x1101f]
[ 0.113239] pci 0000:05:12.0: reg 0x24: [mem 0xa0209400-0xa02097ff]
[ 0.113257] pci 0000:05:12.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.113264] pci 0000:05:12.0: calling .quirk_amd_ide_mode+0x0/0xf0
[ 0.113273] pci 0000:05:12.0: set SATA to AHCI mode
[ 0.113413] pci 0000:05:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.113422] pci 0000:05:13.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.113440] pci 0000:05:13.0: reg 0x10: [mem 0xa0208000-0xa0208fff]
[ 0.113490] pci 0000:05:13.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.113614] pci 0000:05:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.113622] pci 0000:05:13.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.113640] pci 0000:05:13.1: reg 0x10: [mem 0xa0207000-0xa0207fff]
[ 0.113690] pci 0000:05:13.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.113803] pci 0000:05:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.113812] pci 0000:05:13.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.113830] pci 0000:05:13.2: reg 0x10: [mem 0xa0206000-0xa0206fff]
[ 0.113880] pci 0000:05:13.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.113988] pci 0000:05:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.113997] pci 0000:05:13.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.114015] pci 0000:05:13.3: reg 0x10: [mem 0xa0204000-0xa0204fff]
[ 0.114065] pci 0000:05:13.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.114175] pci 0000:05:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.114184] pci 0000:05:13.4: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.114202] pci 0000:05:13.4: reg 0x10: [mem 0xa0205000-0xa0205fff]
[ 0.114252] pci 0000:05:13.4: calling .pcibios_fixup_resources+0x0/0x160
[ 0.114368] pci 0000:05:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.114380] pci 0000:05:13.5: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.114398] pci 0000:05:13.5: reg 0x10: [mem 0xa0209800-0xa02098ff]
[ 0.114448] pci 0000:05:13.5: calling .pcibios_fixup_resources+0x0/0x160
[ 0.114482] pci 0000:05:13.5: supports D1 D2
[ 0.114485] pci 0000:05:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.114491] pci 0000:05:13.5: PME# disabled
[ 0.114613] pci 0000:05:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.114622] pci 0000:05:14.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.114638] pci 0000:05:14.0: reg 0x10: [io 0x11020-0x1102f]
[ 0.114649] pci 0000:05:14.0: reg 0x14: [mem 0xa0209000-0xa02093ff]
[ 0.114690] pci 0000:05:14.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.114806] pci 0000:05:14.1: [1002:438c] type 00 class 0x010183
[ 0.114815] pci 0000:05:14.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.114821] pci 0000:05:14.1: calling .quirk_no_ata_d3+0x0/0x40
[ 0.114838] pci 0000:05:14.1: reg 0x10: [io 0x11030-0x11037]
[ 0.114849] pci 0000:05:14.1: reg 0x14: [io 0x11054-0x11057]
[ 0.114858] pci 0000:05:14.1: reg 0x18: [io 0x11038-0x1103f]
[ 0.114868] pci 0000:05:14.1: reg 0x1c: [io 0x11050-0x11053]
[ 0.114878] pci 0000:05:14.1: reg 0x20: [io 0x11000-0x1100f]
[ 0.114899] pci 0000:05:14.1: legacy IDE quirk: reg 0x18: [io 0x10170-0x10177]
[ 0.114910] pci 0000:05:14.1: legacy IDE quirk: reg 0x1c: [io 0x10376]
[ 0.114921] pci 0000:05:14.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.115034] pci 0000:05:14.2: [1002:4383] type 00 class 0x040300
[ 0.115045] pci 0000:05:14.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.115068] pci 0000:05:14.2: reg 0x10: [mem 0xa0200000-0xa0203fff 64bit]
[ 0.115111] pci 0000:05:14.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.115140] pci 0000:05:14.2: PME# supported from D0 D3hot D3cold
[ 0.115144] pci 0000:05:14.2: PME# disabled
[ 0.115256] pci 0000:05:14.3: [1002:438d] type 00 class 0x060100
[ 0.115264] pci 0000:05:14.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.115326] pci 0000:05:14.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.115438] pci 0000:05:14.4: [1002:4384] type 01 class 0x060400
[ 0.115447] pci 0000:05:14.4: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.115481] pci 0000:05:14.4: calling .pcibios_fixup_resources+0x0/0x160
[ 0.115608] pci_bus 0000:05: fixups for bus
[ 0.115613] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.115626] pci 0000:00:11.0: bridge window [io 0x10000-0x13fff]
[ 0.115631] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.115689] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 0
[ 0.115768] pci_bus 0000:06: scanning bus
[ 0.115799] pci 0000:06:05.0: [10ec:8139] type 00 class 0x020000
[ 0.115812] pci 0000:06:05.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.115834] pci 0000:06:05.0: reg 0x10: [io 0x13000-0x130ff]
[ 0.115847] pci 0000:06:05.0: reg 0x14: [mem 0xa0310000-0xa03100ff]
[ 0.115897] pci 0000:06:05.0: reg 0x30: [mem 0xa0300000-0xa030ffff pref]
[ 0.115907] pci 0000:06:05.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.115942] pci 0000:06:05.0: supports D1 D2
[ 0.115946] pci 0000:06:05.0: PME# supported from D1 D2 D3hot
[ 0.115951] pci 0000:06:05.0: PME# disabled
[ 0.116086] pci_bus 0000:06: fixups for bus
[ 0.116091] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.116103] pci 0000:05:14.4: bridge window [io 0x13000-0x13fff]
[ 0.116110] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.116123] pci_bus 0000:06: bus scan returning with max=06
[ 0.116130] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 1
[ 0.116135] pci_bus 0000:05: bus scan returning with max=06
[ 0.116141] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 0
[ 0.116219] pci_bus 0000:07: scanning bus
[ 0.116245] pci_bus 0000:07: fixups for bus
[ 0.116249] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.116264] pci_bus 0000:07: bus scan returning with max=07
[ 0.116270] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 0
[ 0.116349] pci_bus 0000:08: scanning bus
[ 0.116374] pci_bus 0000:08: fixups for bus
[ 0.116378] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.116392] pci_bus 0000:08: bus scan returning with max=08
[ 0.116398] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 0
[ 0.116479] pci_bus 0000:09: scanning bus
[ 0.116504] pci_bus 0000:09: fixups for bus
[ 0.116508] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.116523] pci_bus 0000:09: bus scan returning with max=09
[ 0.116530] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.116536] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 1
[ 0.116553] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 1
[ 0.116559] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 1
[ 0.116565] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 1
[ 0.116571] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 1
[ 0.116577] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 1
[ 0.116582] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 1
[ 0.116588] pci_bus 0000:00: bus scan returning with max=09
[ 0.116593] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.116768] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
[ 0.116782] pci 0000:00:10.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.116807] pci 0000:00:11.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-06] add_size 200000 add_align 100000
[ 0.116815] pci 0000:00:11.1: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.116821] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 0.116826] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[ 0.116834] pci 0000:00:11.2: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.116839] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 0.116844] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[ 0.116852] pci 0000:00:11.3: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
[ 0.116857] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[ 0.116864] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000
[ 0.116890] pci 0000:00:10.0: BAR 9: assigned [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.116904] pci 0000:00:11.0: BAR 9: assigned [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.116914] pci 0000:00:11.1: BAR 8: assigned [mem 0x80000000-0x801fffff]
[ 0.116925] pci 0000:00:11.1: BAR 9: assigned [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.116934] pci 0000:00:11.2: BAR 8: assigned [mem 0x80200000-0x803fffff]
[ 0.116945] pci 0000:00:11.2: BAR 9: assigned [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.116954] pci 0000:00:11.3: BAR 8: assigned [mem 0x80400000-0x805fffff]
[ 0.116965] pci 0000:00:11.3: BAR 9: assigned [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.116974] pci 0000:00:11.1: BAR 7: assigned [io 0x14000-0x14fff]
[ 0.116983] pci 0000:00:11.2: BAR 7: assigned [io 0x15000-0x15fff]
[ 0.116991] pci 0000:00:11.3: BAR 7: assigned [io 0x16000-0x16fff]
[ 0.117004] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.117012] pci 0000:00:10.0: bridge window [io 0x12000-0x12fff]
[ 0.117021] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.117030] pci 0000:00:10.0: bridge window [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.117039] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.117048] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.117057] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.117071] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.117080] pci 0000:05:14.4: bridge window [io 0x13000-0x13fff]
[ 0.117089] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.117101] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.117109] pci 0000:00:11.0: bridge window [io 0x10000-0x13fff]
[ 0.117117] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.117126] pci 0000:00:11.0: bridge window [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.117135] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.117142] pci 0000:00:11.1: bridge window [io 0x14000-0x14fff]
[ 0.117150] pci 0000:00:11.1: bridge window [mem 0x80000000-0x801fffff]
[ 0.117159] pci 0000:00:11.1: bridge window [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.117168] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.117176] pci 0000:00:11.2: bridge window [io 0x15000-0x15fff]
[ 0.117184] pci 0000:00:11.2: bridge window [mem 0x80200000-0x803fffff]
[ 0.117192] pci 0000:00:11.2: bridge window [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.117201] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.117209] pci 0000:00:11.3: bridge window [io 0x16000-0x16fff]
[ 0.117217] pci 0000:00:11.3: bridge window [mem 0x80400000-0x805fffff]
[ 0.117226] pci 0000:00:11.3: bridge window [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.117239] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff]
[ 0.117242] pci_bus 0000:00: resource 5 [mem 0x80000000-0xe00fffff]
[ 0.117246] pci_bus 0000:00: resource 6 [mem 0xfd800000-0xfd800fff]
[ 0.117250] pci_bus 0000:00: resource 7 [mem 0x80000000000-0xbffffffffff]
[ 0.117255] pci_bus 0000:01: resource 0 [io 0x12000-0x12fff]
[ 0.117259] pci_bus 0000:01: resource 1 [mem 0x90000000-0xa00fffff]
[ 0.117263] pci_bus 0000:01: resource 2 [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.117268] pci_bus 0000:05: resource 0 [io 0x10000-0x13fff]
[ 0.117272] pci_bus 0000:05: resource 1 [mem 0xa0100000-0xa03fffff]
[ 0.117276] pci_bus 0000:05: resource 2 [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.117280] pci_bus 0000:06: resource 0 [io 0x13000-0x13fff]
[ 0.117284] pci_bus 0000:06: resource 1 [mem 0xa0300000-0xa03fffff]
[ 0.117288] pci_bus 0000:07: resource 0 [io 0x14000-0x14fff]
[ 0.117292] pci_bus 0000:07: resource 1 [mem 0x80000000-0x801fffff]
[ 0.117296] pci_bus 0000:07: resource 2 [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.117300] pci_bus 0000:08: resource 0 [io 0x15000-0x15fff]
[ 0.117304] pci_bus 0000:08: resource 1 [mem 0x80200000-0x803fffff]
[ 0.117308] pci_bus 0000:08: resource 2 [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.117311] pci_bus 0000:09: resource 0 [io 0x16000-0x16fff]
[ 0.117315] pci_bus 0000:09: resource 1 [mem 0x80400000-0x805fffff]
[ 0.117319] pci_bus 0000:09: resource 2 [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.117321] PCI: Probing PCI hardware done
[ 0.136598] HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages
[ 0.153782] raid6: altivecx1 gen() 2511 MB/s
[ 0.170856] raid6: altivecx2 gen() 3152 MB/s
[ 0.187924] raid6: altivecx4 gen() 3589 MB/s
[ 0.205010] raid6: altivecx8 gen() 3453 MB/s
[ 0.222108] raid6: int64x1 gen() 1015 MB/s
[ 0.239150] raid6: int64x1 xor() 505 MB/s
[ 0.256237] raid6: int64x2 gen() 1730 MB/s
[ 0.273325] raid6: int64x2 xor() 945 MB/s
[ 0.290393] raid6: int64x4 gen() 2007 MB/s
[ 0.307455] raid6: int64x4 xor() 1181 MB/s
[ 0.324543] raid6: int64x8 gen() 1542 MB/s
[ 0.341616] raid6: int64x8 xor() 1078 MB/s
[ 0.341622] raid6: using algorithm altivecx4 gen() 3589 MB/s
[ 0.341628] raid6: using intx1 recovery algorithm
[ 0.341954] SCSI subsystem initialized
[ 0.342139] libata version 3.00 loaded.
[ 0.342406] usbcore: registered new interface driver usbfs
[ 0.342466] usbcore: registered new interface driver hub
[ 0.342510] usbcore: registered new device driver usb
[ 0.342813] EDAC MC: Ver: 3.0.0
[ 0.343367] Advanced Linux Sound Architecture Driver Initialized.
[ 0.344067] clocksource: Switched to clocksource timebase
[ 0.374516] NET: Registered protocol family 2
[ 0.374840] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.375126] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.375572] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.375644] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.375734] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.375944] NET: Registered protocol family 1
[ 0.376137] RPC: Registered named UNIX socket transport module.
[ 0.376146] RPC: Registered udp transport module.
[ 0.376151] RPC: Registered tcp transport module.
[ 0.376156] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.376514] pci 0000:05:13.0: calling .quirk_usb_early_handoff+0x0/0x9d0
[ 0.428090] pci 0000:05:13.1: calling .quirk_usb_early_handoff+0x0/0x9d0
[ 0.480085] pci 0000:05:13.2: calling .quirk_usb_early_handoff+0x0/0x9d0
[ 0.532084] pci 0000:05:13.3: calling .quirk_usb_early_handoff+0x0/0x9d0
[ 0.584084] pci 0000:05:13.4: calling .quirk_usb_early_handoff+0x0/0x9d0
[ 0.637084] pci 0000:05:13.5: calling .quirk_usb_early_handoff+0x0/0x9d0
[ 0.637232] PCI: CLS 64 bytes, default 128
[ 0.638306] libphy: pasemi gpio mdio bus: probed
[ 0.639619] Initialise system trusted keyrings
[ 0.639680] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[ 0.640126] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.640395] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.640489] fuse init (API version 7.26)
[ 0.643198] Key type asymmetric registered
[ 0.643207] Asymmetric key parser 'x509' registered
[ 0.643248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.643257] io scheduler noop registered
[ 0.643262] io scheduler deadline registered
[ 0.643289] io scheduler cfq registered (default)
[ 0.643296] io scheduler mq-deadline registered
[ 0.643301] io scheduler kyber registered
[ 0.643324] io scheduler bfq registered
[ 0.643534] pcieport 0000:00:10.0: runtime IRQ mapping not provided by arch
[ 0.643657] pcieport 0000:00:10.1: runtime IRQ mapping not provided by arch
[ 0.643745] pcieport 0000:00:10.2: runtime IRQ mapping not provided by arch
[ 0.643834] pcieport 0000:00:10.3: runtime IRQ mapping not provided by arch
[ 0.643925] pcieport 0000:00:11.0: runtime IRQ mapping not provided by arch
[ 0.644031] pcieport 0000:00:11.1: runtime IRQ mapping not provided by arch
[ 0.644160] pcieport 0000:00:11.2: runtime IRQ mapping not provided by arch
[ 0.644268] pcieport 0000:00:11.3: runtime IRQ mapping not provided by arch
[ 0.644388] pcieport 0000:05:14.4: runtime IRQ mapping not provided by arch
[ 0.645198] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.665481] serial8250.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud = 8333333) is a 16550A
[ 0.685481] serial8250.0: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud = 8333333) is a 16550A
[ 0.685740] serial 0000:00:1d.0: runtime IRQ mapping not provided by arch
[ 0.705729] 0000:00:1d.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud = 8333333) is a 16550A
[ 0.705888] serial 0000:00:1d.1: runtime IRQ mapping not provided by arch
[ 0.725872] 0000:00:1d.1: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud = 8333333) is a 16550A
[ 0.726385] Registering PA Semi RNG
[ 0.726476] Linux agpgart interface v0.103
[ 0.726600] [drm] radeon kernel modesetting enabled.
[ 0.726716] radeon 0000:01:00.0: runtime IRQ mapping not provided by arch
[ 0.726986] [drm] initializing kernel modesetting (BARTS 0x1002:0x6738 0x1682:0x3107 0x00).
[ 0.900078] ATOM BIOS: BARTS
[ 0.900239] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 0.900251] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 0.900258] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.900264] [drm] RAM width 256bits DDR
[ 0.900337] [TTM] Zone kernel: Available graphics memory: 4036662 kiB
[ 0.900344] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.900350] [TTM] Initializing pool allocator
[ 0.900361] [TTM] Initializing DMA pool allocator
[ 0.900403] [drm] radeon: 1024M of VRAM memory ready
[ 0.900409] [drm] radeon: 1024M of GTT memory ready.
[ 0.900431] [drm] Loading BARTS Microcode
[ 0.900446] [drm] Internal thermal controller with fan control
[ 0.905596] [drm] radeon: dpm initialized
[ 0.905663] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.945913] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 0.946071] radeon 0000:01:00.0: WB enabled
[ 0.946083] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xc00000026dbf3c00
[ 0.946095] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xc00000026dbf3c0c
[ 0.953473] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xd0003800901b2118
[ 0.953487] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.953493] [drm] Driver supports precise vblank timestamp query.
[ 0.953500] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 0.953543] [drm] radeon: irq initialized.
[ 0.970098] [drm] ring test on 0 succeeded in 2 usecs
[ 0.970118] [drm] ring test on 3 succeeded in 6 usecs
[ 1.145614] [drm] ring test on 5 succeeded in 3 usecs
[ 1.145629] [drm] UVD initialized successfully.
[ 1.145942] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.146048] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.802108] [drm] ib test on ring 5 succeeded
[ 1.803517] [drm] Radeon Display Connectors
[ 1.803526] [drm] Connector 0:
[ 1.803530] [drm] DP-1
[ 1.803533] [drm] HPD4
[ 1.803539] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.803545] [drm] Encoders:
[ 1.803549] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.803554] [drm] Connector 1:
[ 1.803557] [drm] DP-2
[ 1.803561] [drm] HPD5
[ 1.803566] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.803572] [drm] Encoders:
[ 1.803575] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.803580] [drm] Connector 2:
[ 1.803584] [drm] HDMI-A-1
[ 1.803587] [drm] HPD3
[ 1.803592] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.803598] [drm] Encoders:
[ 1.803602] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.803606] [drm] Connector 3:
[ 1.803610] [drm] DVI-D-1
[ 1.803613] [drm] HPD1
[ 1.803619] [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[ 1.803624] [drm] Encoders:
[ 1.803628] [drm] DFP4: INTERNAL_UNIPHY1
[ 1.803632] [drm] Connector 4:
[ 1.803636] [drm] DVI-I-1
[ 1.803639] [drm] HPD6
[ 1.803645] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 1.803650] [drm] Encoders:
[ 1.803654] [drm] DFP5: INTERNAL_UNIPHY
[ 1.803659] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.986247] [drm] fb mappable at 0x90363000
[ 1.986256] [drm] vram apper at 0x90000000
[ 1.986260] [drm] size 7680000
[ 1.986265] [drm] fb depth is 24
[ 1.986268] [drm] pitch is 6400
[ 2.086009] [drm:.btc_dpm_set_power_state] *ERROR* rv770_restrict_performance_levels_before_switch failed
[ 2.223007] Console: switching to colour frame buffer device 200x75
[ 2.319359] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.319862] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 2.323515] loop: module loaded
[ 2.323861] ahci 0000:05:12.0: runtime IRQ mapping not provided by arch
[ 2.323867] ahci 0000:05:12.0: version 3.0
[ 2.323908] ahci 0000:05:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.324452] ahci 0000:05:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.324995] ahci 0000:05:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.326608] scsi host0: ahci
[ 2.326930] scsi host1: ahci
[ 2.327243] scsi host2: ahci
[ 2.327543] scsi host3: ahci
[ 2.327740] ata1: SATA max UDMA/133 abar m1024 at 0xa0209400 port 0xa0209500 irq 9
[ 2.328220] ata2: SATA max UDMA/133 abar m1024 at 0xa0209400 port 0xa0209580 irq 9
[ 2.328688] ata3: SATA max UDMA/133 abar m1024 at 0xa0209400 port 0xa0209600 irq 9
[ 2.329165] ata4: SATA max UDMA/133 abar m1024 at 0xa0209400 port 0xa0209680 irq 9
[ 2.329914] pata_atiixp 0000:05:14.1: runtime IRQ mapping not provided by arch
[ 2.330373] scsi host4: pata_atiixp
[ 2.330706] scsi host5: pata_atiixp
[ 2.330946] ata5: PATA max UDMA/100 cmd 0x11030 ctl 0x11054 bmdma 0x11000 irq 9
[ 2.331445] ata6: DUMMY
[ 2.331655] pata_of_platform f0000000.cf: pio-mode unspecified, assuming PIO0
[ 2.332471] scsi host6: pata_of_platform
[ 2.332737] ata7: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0xf0000800 ctl 0xf000080e
[ 2.333631] libphy: Fixed MDIO Bus: probed
[ 2.334464] PA Semi PWRficient DMA library initialized (20 tx, 64 rx channels)
[ 2.334950] pasemi_mac 0000:00:14.0: runtime IRQ mapping not provided by arch
[ 2.335008] pasemi_mac 0000:00:14.1: runtime IRQ mapping not provided by arch
[ 2.335049] pasemi_mac 0000:00:14.2: runtime IRQ mapping not provided by arch
[ 2.335105] pasemi_mac 0000:00:14.3: runtime IRQ mapping not provided by arch
[ 2.335300] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
[ 2.335710] pasemi_mac 0000:00:15.0: runtime IRQ mapping not provided by arch
[ 2.335731] pasemi_mac 0000:00:15.0: no mac address in device tree, not configuring
[ 2.336284] pasemi_mac 0000:00:15.1: runtime IRQ mapping not provided by arch
[ 2.336370] 8139cp 0000:06:05.0: runtime IRQ mapping not provided by arch
[ 2.336374] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.336816] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.337536] 8139too 0000:06:05.0: runtime IRQ mapping not provided by arch
[ 2.337539] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.338783] 8139too 0000:06:05.0 eth1: RealTek RTL8139 at 0xd000380000013000, 00:e0:e8:16:5f:64, IRQ 4
[ 2.339513] PPP generic driver version 2.4.2
[ 2.339855] PPP BSD Compression module registered
[ 2.340131] PPP Deflate Compression module registered
[ 2.340421] NET: Registered protocol family 24
[ 2.340673] orinoco 0.15 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin <proski at gnu.org>, et al)
[ 2.340676] orinoco_plx 0.15 (Pavel Roskin <proski at gnu.org>, David Gibson <hermes at gibson.dropbear.id.au>, Daniel Barlow <dan at telent.net>)
[ 2.340718] orinoco_pci 0.15 (Pavel Roskin <proski at gnu.org>, David Gibson <hermes at gibson.dropbear.id.au> & Jean Tourrilhes <jt at hpl.hp.com>)
[ 2.340878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.341331] ehci-pci: EHCI PCI platform driver
[ 2.341604] ehci-pci 0000:05:13.5: runtime IRQ mapping not provided by arch
[ 2.341631] ehci-pci 0000:05:13.5: enabling bus mastering
[ 2.341664] ehci-pci 0000:05:13.5: EHCI Host Controller
[ 2.342046] ehci-pci 0000:05:13.5: new USB bus registered, assigned bus number 1
[ 2.342544] ehci-pci 0000:05:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 2.343046] ehci-pci 0000:05:13.5: debug port 1
[ 2.343342] ehci-pci 0000:05:13.5: irq 12, io mem 0xa0209800
[ 2.350075] ehci-pci 0000:05:13.5: USB 2.0 started, EHCI 1.00
[ 2.350512] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.350946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.351421] usb usb1: Product: EHCI Host Controller
[ 2.370609] usb usb1: Manufacturer: Linux 4.15.0-rc1_A-EON_AmigaOne_X1000_Nemo ehci_hcd
[ 2.390408] usb usb1: SerialNumber: 0000:05:13.5
[ 2.410521] hub 1-0:1.0: USB hub found
[ 2.430249] hub 1-0:1.0: 10 ports detected
[ 2.450097] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.469973] ohci-pci: OHCI PCI platform driver
[ 2.489908] ohci-pci 0000:05:13.0: runtime IRQ mapping not provided by arch
[ 2.489927] ohci-pci 0000:05:13.0: enabling bus mastering
[ 2.489931] ohci-pci 0000:05:13.0: OHCI PCI host controller
[ 2.492445] ata7.00: CFA: SanDisk SDCFB-256, HDX 2.33, max PIO4
[ 2.492449] ata7.00: 501760 sectors, multi 0: LBA
[ 2.492456] ata7.00: configured for PIO
[ 2.570833] ohci-pci 0000:05:13.0: new USB bus registered, assigned bus number 2
[ 2.591388] ohci-pci 0000:05:13.0: irq 9, io mem 0xa0208000
[ 2.652264] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.667144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.667148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.667152] usb usb2: Product: OHCI PCI host controller
[ 2.667155] usb usb2: Manufacturer: Linux 4.15.0-rc1_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 2.667158] usb usb2: SerialNumber: 0000:05:13.0
[ 2.743171] hub 2-0:1.0: USB hub found
[ 2.743190] hub 2-0:1.0: 2 ports detected
[ 2.743377] ohci-pci 0000:05:13.1: runtime IRQ mapping not provided by arch
[ 2.743393] ohci-pci 0000:05:13.1: enabling bus mastering
[ 2.743396] ohci-pci 0000:05:13.1: OHCI PCI host controller
[ 2.743463] ohci-pci 0000:05:13.1: new USB bus registered, assigned bus number 3
[ 2.743503] ohci-pci 0000:05:13.1: irq 10, io mem 0xa0207000
[ 2.799174] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.799178] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.799181] usb usb3: Product: OHCI PCI host controller
[ 2.799185] usb usb3: Manufacturer: Linux 4.15.0-rc1_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 2.799188] usb usb3: SerialNumber: 0000:05:13.1
[ 2.799421] hub 3-0:1.0: USB hub found
[ 2.799440] hub 3-0:1.0: 2 ports detected
[ 2.799708] ohci-pci 0000:05:13.2: runtime IRQ mapping not provided by arch
[ 2.799724] ohci-pci 0000:05:13.2: enabling bus mastering
[ 2.799728] ohci-pci 0000:05:13.2: OHCI PCI host controller
[ 2.799825] ohci-pci 0000:05:13.2: new USB bus registered, assigned bus number 4
[ 2.799868] ohci-pci 0000:05:13.2: irq 11, io mem 0xa0206000
[ 2.855149] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.855153] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.855156] usb usb4: Product: OHCI PCI host controller
[ 2.855160] usb usb4: Manufacturer: Linux 4.15.0-rc1_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 2.855162] usb usb4: SerialNumber: 0000:05:13.2
[ 2.855392] hub 4-0:1.0: USB hub found
[ 2.855412] hub 4-0:1.0: 2 ports detected
[ 2.855683] ohci-pci 0000:05:13.3: runtime IRQ mapping not provided by arch
[ 2.855698] ohci-pci 0000:05:13.3: enabling bus mastering
[ 2.855702] ohci-pci 0000:05:13.3: OHCI PCI host controller
[ 2.855794] ohci-pci 0000:05:13.3: new USB bus registered, assigned bus number 5
[ 2.855832] ohci-pci 0000:05:13.3: irq 10, io mem 0xa0204000
[ 2.911148] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.911152] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.911155] usb usb5: Product: OHCI PCI host controller
[ 2.911158] usb usb5: Manufacturer: Linux 4.15.0-rc1_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 2.911161] usb usb5: SerialNumber: 0000:05:13.3
[ 2.911390] hub 5-0:1.0: USB hub found
[ 2.911409] hub 5-0:1.0: 2 ports detected
[ 2.911681] ohci-pci 0000:05:13.4: runtime IRQ mapping not provided by arch
[ 2.911699] ohci-pci 0000:05:13.4: enabling bus mastering
[ 2.911702] ohci-pci 0000:05:13.4: OHCI PCI host controller
[ 2.911796] ohci-pci 0000:05:13.4: new USB bus registered, assigned bus number 6
[ 2.911834] ohci-pci 0000:05:13.4: irq 11, io mem 0xa0205000
[ 2.977098] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.977102] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.977105] usb usb6: Product: OHCI PCI host controller
[ 2.977109] usb usb6: Manufacturer: Linux 4.15.0-rc1_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 2.977112] usb usb6: SerialNumber: 0000:05:13.4
[ 2.977344] hub 6-0:1.0: USB hub found
[ 2.977363] hub 6-0:1.0: 2 ports detected
[ 2.977796] usbcore: registered new interface driver usblp
[ 2.977909] usbcore: registered new interface driver usb-storage
[ 2.977992] usbcore: registered new interface driver usbserial_generic
[ 2.978036] usbserial: USB Serial support registered for generic
[ 2.978098] usbcore: registered new interface driver ftdi_sio
[ 2.978140] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.978316] usbcore: registered new interface driver option
[ 2.978359] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.978792] mousedev: PS/2 mouse device common for all mice
[ 2.978894] usbcore: registered new interface driver synaptics_usb
[ 2.979372] usbcore: registered new interface driver iforce
[ 2.979952] usbcore: registered new interface driver xpad
[ 2.980005] usbcore: registered new interface driver usb_acecad
[ 2.980085] usbcore: registered new interface driver aiptek
[ 2.980142] usbcore: registered new interface driver gtco
[ 2.980196] usbcore: registered new interface driver hanwang
[ 2.980249] usbcore: registered new interface driver kbtab
[ 2.980489] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.980514] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 2.980568] i2c /dev entries driver
[ 2.981423] i2c-pasemi 0000:00:1c.0: runtime IRQ mapping not provided by arch
[ 2.981617] i2c-pasemi 0000:00:1c.1: runtime IRQ mapping not provided by arch
[ 2.981806] i2c-pasemi 0000:00:1c.2: runtime IRQ mapping not provided by arch
[ 2.982057] IR NEC protocol handler initialized
[ 2.982069] IR RC5(x/sz) protocol handler initialized
[ 2.982071] IR RC6 protocol handler initialized
[ 2.982072] IR JVC protocol handler initialized
[ 2.982074] IR Sony protocol handler initialized
[ 2.982075] IR SANYO protocol handler initialized
[ 2.982077] IR Sharp protocol handler initialized
[ 2.982078] IR MCE Keyboard/mouse protocol handler initialized
[ 2.982080] IR XMP protocol handler initialized
[ 3.000080] i2c i2c-10: Detected TI TMP423 chip at 0x4c
[ 3.045199] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel at redhat.com
[ 3.045219] pasemi_edac 0000:00:04.0: runtime IRQ mapping not provided by arch
[ 3.045499] EDAC MC0: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:04.0 (POLLED)
[ 3.045526] pasemi_edac 0000:00:05.0: runtime IRQ mapping not provided by arch
[ 3.045794] EDAC MC1: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:05.0 (POLLED)
[ 3.046044] usbcore: registered new interface driver usbhid
[ 3.046046] usbhid: USB HID core driver
[ 3.046706] no UART detected at 0x1
[ 3.047135] snd_hda_intel 0000:01:00.1: runtime IRQ mapping not provided by arch
[ 3.047157] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[ 3.047199] snd_hda_intel 0000:05:14.2: runtime IRQ mapping not provided by arch
[ 3.047220] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[ 3.047413] usbcore: registered new interface driver snd-usb-audio
[ 3.047444] usbcore: registered new interface driver snd-ua101
[ 3.047476] usbcore: registered new interface driver snd-usb-usx2y
[ 3.047508] usbcore: registered new interface driver snd-usb-caiaq
[ 3.047537] usbcore: registered new interface driver snd-usb-6fire
[ 3.047573] usbcore: registered new interface driver snd-usb-hiface
[ 3.047599] usbcore: registered new interface driver snd-bcd2000
[ 3.047624] usbcore: registered new interface driver snd_usb_pod
[ 3.047649] usbcore: registered new interface driver snd_usb_podhd
[ 3.047674] usbcore: registered new interface driver snd_usb_toneport
[ 3.047699] usbcore: registered new interface driver snd_usb_variax
[ 3.047701] oprofile: using ppc64/pa6t performance monitoring.
[ 3.047813] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.048030] Initializing XFRM netlink socket
[ 3.048724] NET: Registered protocol family 10
[ 3.049730] Segment Routing with IPv6
[ 3.049766] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.050030] NET: Registered protocol family 17
[ 3.050039] NET: Registered protocol family 15
[ 3.050090] No cpufreq driver, powersavings modes disabled
[ 3.050092] Using PA6T idle loop (spin)
[ 3.050489] Loading compiled-in X.509 certificates
[ 3.050785] Btrfs loaded, crc32c=crc32c-generic
[ 3.096076] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 3.427085] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input0
[ 3.553225] usb 2-1: New USB device found, idVendor=04d9, idProduct=1503
[ 3.553229] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.553232] usb 2-1: Product: USB Keyboard
[ 3.553236] usb 2-1: Manufacturer:
[ 3.697420] input: USB Keyboard as /devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1:1.0/0003:04D9:1503.0001/input/input1
[ 3.749353] hid-generic 0003:04D9:1503.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:05:13.0-1/input0
[ 3.839149] input: USB Keyboard as /devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1:1.1/0003:04D9:1503.0002/input/input2
[ 3.891140] hid-generic 0003:04D9:1503.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:05:13.0-1/input1
[ 4.204385] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[ 4.204389] snd_hda_codec_idt hdaudioC1D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.204394] snd_hda_codec_idt hdaudioC1D3: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 4.204397] snd_hda_codec_idt hdaudioC1D3: mono: mono_out=0x0
[ 4.204400] snd_hda_codec_idt hdaudioC1D3: dig-out=0x21/0x0
[ 4.204402] snd_hda_codec_idt hdaudioC1D3: inputs:
[ 4.204407] snd_hda_codec_idt hdaudioC1D3: Front Mic=0xb
[ 4.204410] snd_hda_codec_idt hdaudioC1D3: Rear Mic=0xe
[ 4.204414] snd_hda_codec_idt hdaudioC1D3: Line=0xc
[ 4.204417] snd_hda_codec_idt hdaudioC1D3: CD=0x12
[ 4.816725] rtc_cmos rtc_cmos: setting system clock to 2017-11-29 20:12:55 UTC (1511986375)
[ 4.817145] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.818023] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.818028] ALSA device list:
[ 4.818030] #0: HDA ATI HDMI at 0xa0040000 irq 49
[ 4.818137] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.818140] cfg80211: failed to load regulatory.db
[ 5.026076] usb 1-9: new high-speed USB device number 5 using ehci-pci
[ 5.088079] usb 4-2: new low-speed USB device number 2 using ohci-pci
[ 5.118025] usb 5-2: new low-speed USB device number 2 using ohci-pci
[ 5.357729] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.357831] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.377851] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.397794] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 5.397805] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.417779] usb 1-9: New USB device found, idVendor=057c, idProduct=8501
[ 5.417784] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.417787] usb 1-9: Product: FRITZ!WLAN USB Stick N v2
[ 5.417790] usb 1-9: Manufacturer: AVM Berlin
[ 5.417793] usb 1-9: SerialNumber: 246511446201
[ 5.438051] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.438055] ata3.00: configured for UDMA/100
[ 5.440185] usb 4-2: New USB device found, idVendor=046a, idProduct=000c
[ 5.440189] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.444171] usb 5-2: New USB device found, idVendor=040b, idProduct=6533
[ 5.444175] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.444178] usb 5-2: Product: SPEED-LINK Competition Pro
[ 5.444181] usb 5-2: Manufacturer: A
[ 5.444184] usb 5-2: SerialNumber: 0001
[ 5.447848] input: HID 046a:000c as /devices/pci0000:00/0000:00:11.0/0000:05:13.2/usb4/4-2/4-2:1.0/0003:046A:000C.0003/input/input3
[ 5.448034] hid-generic 0003:046A:000C.0003: input: USB HID v1.00 Mouse [HID 046a:000c] on usb-0000:05:13.2-2/input0
[ 5.453799] input: A SPEED-LINK Competition Pro as /devices/pci0000:00/0000:00:11.0/0000:05:13.3/usb5/5-2/5-2:1.0/0003:040B:6533.0004/input/input4
[ 5.453992] hid-generic 0003:040B:6533.0004: input: USB HID v1.00 Joystick [A SPEED-LINK Competition Pro] on usb-0000:05:13.3-2/input0
[ 5.460597] ata4.00: ATA-8: ESA3SF1240GB, 4.C.V, max UDMA/133
[ 5.460601] ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.460607] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.553073] usb 1-10: new high-speed USB device number 6 using ehci-pci
[ 5.568270] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.568274] ata4.00: configured for UDMA/133
[ 5.630787] ata1.00: ATA-8: ST2000DM001-9YN164, CC4B, max UDMA/133
[ 5.630791] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.630798] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.672694] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.672697] ata1.00: configured for UDMA/133
[ 5.693625] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4B PQ: 0 ANSI: 5
[ 5.694119] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 5.694124] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.694198] sd 0:0:0:0: [sda] Write Protect is off
[ 5.694202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.694255] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.697197] usb 1-10: New USB device found, idVendor=0781, idProduct=5583
[ 5.697201] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.697205] usb 1-10: Product: Ultra Fit
[ 5.697208] usb 1-10: Manufacturer: SanDisk
[ 5.697211] usb 1-10: SerialNumber: 4C530001021221121340
[ 5.697554] usb-storage 1-10:1.0: USB Mass Storage device detected
[ 5.697618] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 2) sda2 (SFS^B)(res 2 spb 1) sda3 (SFS^B)(res 2 spb 2) sda4 ((res 2 spb 1)
[ 5.697798] sda: p4 size 18446744071956107760 extends beyond EOD, enabling native capacity
[ 5.698622] scsi host7: usb-storage 1-10:1.0
[ 5.698914] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 2) sda2 (SFS^B)(res 2 spb 1) sda3 (SFS^B)(res 2 spb 2) sda4 ((res 2 spb 1)
[ 5.699106] sda: p4 size 18446744071956107760 extends beyond EOD, truncated
[ 5.699739] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.715187] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.779216] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5
[ 5.821813] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.821816] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.822021] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 5.822266] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 5.826388] scsi 3:0:0:0: Direct-Access ATA ESA3SF1240GB V PQ: 0 ANSI: 5
[ 5.826736] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 5.826948] sd 3:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 5.826978] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.826983] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.827033] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.829386] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3 sdb4
[ 5.830454] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 5.876764] scsi 6:0:0:0: Direct-Access ATA SanDisk SDCFB-25 2.33 PQ: 0 ANSI: 5
[ 5.877288] sd 6:0:0:0: [sdc] 501760 512-byte logical blocks: (257 MB/245 MiB)
[ 5.877319] sd 6:0:0:0: [sdc] Write Protect is off
[ 5.877324] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.877378] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.877560] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.904917] sdc: sdc1
[ 5.926019] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 6.125189] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input5
[ 6.125296] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input6
[ 6.125400] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input7
[ 6.125507] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input8
[ 6.125609] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input9
[ 6.125714] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input10
[ 6.125819] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input11
[ 6.125921] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input12
[ 6.810756] scsi 7:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 6.839000] sd 7:0:0:0: [sdd] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[ 6.840246] sd 7:0:0:0: [sdd] Write Protect is off
[ 6.840251] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 6.841247] sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.848374] sdd: sdd1 sdd2
[ 6.851503] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 6.866123] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 7.534791] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities
[ 7.644699] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 7.674619] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 7.778519] devtmpfs: mounted
[ 7.809486] Freeing unused kernel memory: 972K
[ 7.838334] This architecture does not have kernel memory protection.
[ 8.210595] random: crng init done
[ 9.524600] systemd-udevd[1362]: starting version 204
[ 11.941086] usb 1-9: reset high-speed USB device number 5 using ehci-pci
[ 12.102382] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[ 12.163506] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.208392] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.211171] usbcore: registered new interface driver rt2800usb
[ 25.063468] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 25.447738] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 36.030585] Bluetooth: Core ver 2.22
[ 36.055344] NET: Registered protocol family 31
[ 36.080303] Bluetooth: HCI device and connection manager initialized
[ 36.105912] Bluetooth: HCI socket layer initialized
[ 36.131173] Bluetooth: L2CAP socket layer initialized
[ 36.155770] Bluetooth: SCO socket layer initialized
[ 36.263770] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.265108] Bluetooth: RFCOMM TTY layer initialized
[ 36.265115] Bluetooth: RFCOMM socket layer initialized
[ 36.265123] Bluetooth: RFCOMM ver 1.11
[ 36.365378] Bluetooth: BNEP filters: protocol multicast
[ 36.365731] Bluetooth: BNEP socket layer initialized
[ 40.564750] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 40.790821] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 40.791488] ieee80211 phy0: rt2800usb_write_firmware: Info - Firmware loading not required - NIC in AutoRun mode
[ 40.839093] radeon_dp_aux_transfer_native: 158 callbacks suppressed
[ 41.090726] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.103514] 8139too 0000:06:05.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 41.212534] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.523350] wlan0: authenticate with 00:21:29:6f:ed:19
[ 49.612899] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 49.614534] wlan0: authenticated
[ 49.614571] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 49.614576] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 49.615150] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 49.617279] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 49.624262] wlan0: associated
[ 53.585372] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 57.507186] wlan0: authenticate with 00:21:29:6f:ed:19
[ 57.597287] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 57.598926] wlan0: authenticated
[ 57.598957] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 57.598962] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 57.599073] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 57.601678] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 57.608782] wlan0: associated
[ 61.565492] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 65.587127] wlan0: authenticate with 00:21:29:6f:ed:19
[ 65.676447] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 65.679209] wlan0: authenticated
[ 65.679241] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 65.679246] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 65.681076] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 65.683347] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 65.690321] wlan0: associated
[ 69.655403] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 73.666762] wlan0: authenticate with 00:21:29:6f:ed:19
[ 73.757108] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 73.758743] wlan0: authenticated
[ 73.758774] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 73.758779] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 73.759260] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 73.761488] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 73.768728] wlan0: associated
[ 77.728088] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 81.771994] wlan0: authenticate with 00:21:29:6f:ed:19
[ 81.861279] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 81.862915] wlan0: authenticated
[ 81.862948] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 81.862953] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 81.863060] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 81.865404] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 81.872397] wlan0: associated
[ 85.835727] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 89.859073] wlan0: authenticate with 00:21:29:6f:ed:19
[ 89.949190] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 89.950836] wlan0: authenticated
[ 89.950867] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 89.950873] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 89.951115] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 89.953328] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 89.960305] wlan0: associated
[ 90.620067] radeon_dp_aux_transfer_native: 158 callbacks suppressed
[ 93.925921] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 98.114990] wlan0: authenticate with 00:21:29:6f:ed:19
[ 98.206380] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 98.210057] wlan0: authenticated
[ 98.210102] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 98.210108] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 98.212050] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 98.214259] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 98.221124] wlan0: associated
[ 100.347226] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 100.351346] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
[ 100.386321] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 102.185987] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 106.220064] wlan0: authenticate with 00:21:29:6f:ed:19
[ 106.312297] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 106.315399] wlan0: authenticated
[ 106.315450] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 106.315455] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 106.316253] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 106.318431] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 106.325409] wlan0: associated
[ 110.285994] wlan0: deauthenticated from 00:21:29:6f:ed:19 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 114.339378] wlan0: authenticate with 00:21:29:6f:ed:19
[ 114.429461] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 114.432257] wlan0: authenticated
[ 114.432292] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 114.432298] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 114.433093] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 114.435467] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0 aid=5)
[ 114.442702] wlan0: associated
[ 115.537429] wlan0: deauthenticating from 00:21:29:6f:ed:19 by local choice (Reason: 3=DEAUTH_LEAVING)
-------------- next part --------------
00:00.0 Host bridge: PA Semi, Inc PWRficient Host Bridge (rev 12)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 86
Capabilities: <access denied>
00:01.0 Memory controller: PA Semi, Inc PWRficient L2 Cache (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 82
Capabilities: <access denied>
00:03.0 PIC: PA Semi, Inc PWRficient System/Debug Controller (rev 13) (prog-if 80)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 84
00:04.0 RAM memory: PA Semi, Inc PWRficient DDR2 Memory Controller (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 88
Capabilities: <access denied>
Kernel driver in use: pasemi_edac
00:05.0 RAM memory: PA Semi, Inc PWRficient DDR2 Memory Controller (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 90
Capabilities: <access denied>
Kernel driver in use: pasemi_edac
00:08.0 Power PC: PA Semi, Inc PA6T Core (rev 12)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:09.0 Power PC: PA Semi, Inc PA6T Core (rev 12)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:10.0 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90000000-a00fffff
Prefetchable memory behind bridge: 0000080000000000-00000800001fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.1 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 4
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.2 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 3
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.3 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 2
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 00000000-00003fff
Memory behind bridge: a0100000-a03fffff
Prefetchable memory behind bridge: 0000080000200000-00000800003fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.1 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 4
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000080000400000-00000800005fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.2 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 3
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 80200000-803fffff
Prefetchable memory behind bridge: 0000080000600000-00000800007fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.3 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 2
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 80400000-805fffff
Prefetchable memory behind bridge: 0000080000800000-00000800009fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 1
00:14.1 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 1
00:14.2 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 1
00:14.3 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 67
Kernel driver in use: pasemi_mac
00:15.0 Ethernet controller: PA Semi, Inc PWRficient 10-Gigabit Ethernet (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 68
00:15.1 Ethernet controller: PA Semi, Inc PWRficient 10-Gigabit Ethernet (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 1
00:1a.0 DMA controller: PA Semi, Inc PWRficient DMA Controller (rev 12) (prog-if ff)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 128
Capabilities: <access denied>
00:1b.0 System peripheral: PA Semi, Inc PWRficient SERDES (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1c.0 SMBus: PA Semi, Inc PWRficient SMBus Controller (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 70
Region 0: I/O ports at 7f0200 [size=64]
Kernel driver in use: i2c-pasemi
00:1c.1 SMBus: PA Semi, Inc PWRficient SMBus Controller (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 71
Region 0: I/O ports at 7f0240 [size=64]
Kernel driver in use: i2c-pasemi
00:1c.2 SMBus: PA Semi, Inc PWRficient SMBus Controller (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 72
Region 0: I/O ports at 7f0280 [size=64]
Kernel driver in use: i2c-pasemi
00:1d.0 Serial controller: PA Semi, Inc PWRficient 16550 UART (rev 02) (prog-if 03 [16650])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 73
Region 0: I/O ports at 7f03f8 [size=8]
Kernel driver in use: serial
00:1d.1 Serial controller: PA Semi, Inc PWRficient 16550 UART (rev 02) (prog-if 03 [16650])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 74
Region 0: I/O ports at 7f02f8 [size=8]
Kernel driver in use: serial
00:1e.0 ISA bridge: PA Semi, Inc PWRficient LPC/Localbus Interface (rev 12) (prog-if ff)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 81
Region 0: I/O ports at 7f0400 [size=256]
Region 1: I/O ports at 7f0500 [size=256]
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Barts XT [Radeon HD 6870] (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 3107
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at a0020000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 2000 [size=256]
Expansion ROM at a0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6800 Series]
Subsystem: XFX Pine Group Inc. Device aa88
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 49
Region 0: Memory at a0040000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
05:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1040 [size=8]
Region 1: I/O ports at 105c [size=4]
Region 2: I/O ports at 1048 [size=8]
Region 3: I/O ports at 1058 [size=4]
Region 4: I/O ports at 1010 [size=16]
Region 5: Memory at a0209400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
05:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 252, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at a0208000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
05:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 252, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at a0207000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
05:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 252, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at a0206000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
05:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 252, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at a0204000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
05:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 252, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at a0205000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
05:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 252, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 12
Region 0: Memory at a0209800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
05:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 14)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 1020 [size=16]
Region 1: Memory at a0209000 (32-bit, non-prefetchable) [size=1K]
05:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE (prog-if 83 [Master PriP PriO])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1030 [size=8]
Region 1: I/O ports at 1054 [size=4]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1000 [size=16]
Kernel driver in use: pata_atiixp
05:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Subsystem: Varisys Ltd Device 1000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 240, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at a0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
05:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
05:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255
Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a0300000-a03fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 4
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at a0310000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at a0300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
More information about the Linuxppc-dev
mailing list