[1/2] powerpc/perf/imc: use cpu_to_node instead topology_physical_package_id

[Michael Ellerman]

On Sun, 2017-10-15 at 18:43:41 UTC, Madhavan Srinivasan wrote:
> ...
> [1069001518.000000] [c000003f95b3f770] [c0000000000b2574] init_imc_pmu+0x1f4/0xc40
> [1069005374.000000] [c000003f95b3f850] [c00000000008fec8] opal_imc_counters_probe+0x2e8/0x3e0
> [1069009426.000000] [c000003f95b3f950] [c0000000006153a4] platform_drv_probe+0x44/0x90
> [1069012818.000000] [c000003f95b3f9c0] [c0000000006124c0] really_probe+0x290/0x370
> [1069016302.000000] [c000003f95b3fa50] [c0000000006126c8] __driver_attach+0x128/0x130
> [1069019564.000000] [c000003f95b3fa90] [c00000000060f38c] bus_for_each_dev+0x9c/0x110
> [1069022838.000000] [c000003f95b3fae0] [c000000000611dfc] driver_attach+0x3c/0x60
> [1069026104.000000] [c000003f95b3fb10] [c0000000006118d8] bus_add_driver+0x298/0x320
> [1069029428.000000] [c000003f95b3fb90] [c0000000006135b8] driver_register+0xb8/0x1a0
> [1069033016.000000] [c000003f95b3fc00] [c00000000061533c] __platform_driver_register+0x8c/0xb0
> [1069036362.000000] [c000003f95b3fc30] [c000000000cbb0fc] opal_imc_driver_init+0x24/0x38
> [1069039756.000000] [c000003f95b3fc50] [c00000000000cc70] do_one_initcall+0xd0/0x250
> [1069043094.000000] [c000003f95b3fd20] [c000000000ca44d0] kernel_init_freeable+0x244/0x324
> [1069046490.000000] [c000003f95b3fdc0] [c00000000000d600] kernel_init+0x30/0x1b0
> [1069050348.000000] [c000003f95b3fe30] [c00000000000b268] ret_from_kernel_thread+0x5c/0x74
> 
> init_imc_pmu() use topology_physical_package_id() to detect the phy_id
> of the processor it is on to get local memory. But this cause crashes
> when node_id are not same as physicaly id. As a fix use cpu_to_node().
> 
> Reported-By: Rob Lippert <rlippert at google.com>
> Tested-By: Madhavan Srinivasan <maddy at linux.vnet.ibm.com>
> Signed-off-by: Madhavan Srinivasan <maddy at linux.vnet.ibm.com>

Applied to powerpc fixes, thanks.

https://git.kernel.org/powerpc/c/f3f1dfd600ff82b18b7ea73d80eb27

cheers