[PATCH 1/3] powerpc/64s/idle: POWER9 implement a separate idle stop function for hotplug

Nicholas Piggin npiggin at gmail.com
Sat Nov 18 01:08:05 AEDT 2017


Implement a new function to invoke stop, power9_offline_stop, which is
like power9_idle_stop but used by the cpu hotplug code.

Move KVM secondary state manipulation code to the offline case.

Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/include/asm/processor.h  |  1 +
 arch/powerpc/kernel/idle_book3s.S     | 24 ++++++++++++++++++------
 arch/powerpc/platforms/powernv/idle.c |  2 +-
 3 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index bdab3b74eb98..0ebdb58460ce 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -500,6 +500,7 @@ extern int powersave_nap;	/* set if nap mode can be used in idle loop */
 extern unsigned long power7_idle_insn(unsigned long type); /* PNV_THREAD_NAP/etc*/
 extern void power7_idle_type(unsigned long type);
 extern unsigned long power9_idle_stop(unsigned long psscr_val);
+extern unsigned long power9_offline_stop(unsigned long psscr_val);
 extern void power9_idle_type(unsigned long stop_psscr_val,
 			      unsigned long stop_psscr_mask);
 
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 01e1c1997893..2f8364e7b489 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -325,12 +325,6 @@ enter_winkle:
  * r3 - PSSCR value corresponding to the requested stop state.
  */
 power_enter_stop:
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-	/* Tell KVM we're entering idle */
-	li	r4,KVM_HWTHREAD_IN_IDLE
-	/* DO THIS IN REAL MODE!  See comment above. */
-	stb	r4,HSTATE_HWTHREAD_STATE(r13)
-#endif
 /*
  * Check if we are executing the lite variant with ESL=EC=0
  */
@@ -435,6 +429,24 @@ _GLOBAL(power9_idle_stop)
 	b	pnv_powersave_common
 	/* No return */
 
+/*
+ * Entered with MSR[EE]=0 and no soft-masked interrupts pending.
+ * r3 contains desired PSSCR register value.
+ */
+_GLOBAL(power9_offline_stop)
+	std	r3, PACA_REQ_PSSCR(r13)
+	mtspr 	SPRN_PSSCR,r3
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	/* Tell KVM we're entering idle */
+	li	r4,KVM_HWTHREAD_IN_IDLE
+	/* DO THIS IN REAL MODE!  See comment above. */
+	stb	r4,HSTATE_HWTHREAD_STATE(r13)
+#endif
+	LOAD_REG_ADDR(r4,power_enter_stop)
+	b	pnv_powersave_common
+	/* No return */
+
+
 /*
  * On waking up from stop 0,1,2 with ESL=1 on POWER9 DD1,
  * HSPRG0 will be set to the HSPRG0 value of one of the
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 443d5ca71995..a921d5428d76 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -434,7 +434,7 @@ unsigned long pnv_cpu_offline(unsigned int cpu)
 		psscr = mfspr(SPRN_PSSCR);
 		psscr = (psscr & ~pnv_deepest_stop_psscr_mask) |
 						pnv_deepest_stop_psscr_val;
-		srr1 = power9_idle_stop(psscr);
+		srr1 = power9_offline_stop(psscr);
 
 	} else if ((idle_states & OPAL_PM_WINKLE_ENABLED) &&
 		   (idle_states & OPAL_PM_LOSE_FULL_CONTEXT)) {
-- 
2.15.0



More information about the Linuxppc-dev mailing list