[PATCH 6/6] cpuidle-powernv: Allow Deep stop states that don't stop time
Gautham R Shenoy
ego at linux.vnet.ibm.com
Wed May 31 18:39:48 AEST 2017
On Tue, May 30, 2017 at 09:10:06PM +1000, Nicholas Piggin wrote:
> On Tue, 30 May 2017 16:20:55 +0530
> Gautham R Shenoy <ego at linux.vnet.ibm.com> wrote:
>
> > On Tue, May 30, 2017 at 05:13:57PM +1000, Nicholas Piggin wrote:
> > > On Tue, 16 May 2017 14:19:48 +0530
> > > "Gautham R. Shenoy" <ego at linux.vnet.ibm.com> wrote:
> > >
> > > > From: "Gautham R. Shenoy" <ego at linux.vnet.ibm.com>
> > > >
> > > > The current code in the cpuidle-powernv intialization only allows deep
> > > > stop states (indicated by OPAL_PM_STOP_INST_DEEP) which lose timebase
> > > > (indicated by OPAL_PM_TIMEBASE_STOP). This assumption goes back to
> > > > POWER8 time where deep states used to lose the timebase. However, on
> > > > POWER9, we do have stop states that are deep (they lose hypervisor
> > > > state) but retain the timebase.
> > > >
> > > > Fix the initialization code in the cpuidle-powernv driver to allow
> > > > such deep states.
> > > >
> > > > Further, there is a bug in cpuidle-powernv driver with
> > > > CONFIG_TICK_ONESHOT=n where we end up incrementing the nr_idle_states
> > > > even if a platform idle state which loses time base was not added to
> > > > the cpuidle table.
> > > >
> > > > Fix this by ensuring that the nr_idle_states variable gets incremented
> > > > only when the platform idle state was added to the cpuidle table.
> > >
> > > Should this be a separate patch? Stable?
> >
> > Ok. Will send it out separately.
>
> Looks like mpe has merged this in next now. I just wonder if this
> particular bit would be relevant for POWER8 and therefore be a
> stable candidate? All the POWER9 idle fixes may not be suitable for
> stable.
I agree. The other POWER9 fixes aren't suitable for stable. I will
clean this patch alone based on your suggestion and mark it for
stable.
>
>
> > > > Signed-off-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
> > > > ---
> > > > drivers/cpuidle/cpuidle-powernv.c | 16 ++++++++++------
> > > > 1 file changed, 10 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
> > > > index 12409a5..45eaf06 100644
> > > > --- a/drivers/cpuidle/cpuidle-powernv.c
> > > > +++ b/drivers/cpuidle/cpuidle-powernv.c
> > > > @@ -354,6 +354,7 @@ static int powernv_add_idle_states(void)
> > > >
> > > > for (i = 0; i < dt_idle_states; i++) {
> > > > unsigned int exit_latency, target_residency;
> > > > + bool stops_timebase = false;
> > > > /*
> > > > * If an idle state has exit latency beyond
> > > > * POWERNV_THRESHOLD_LATENCY_NS then don't use it
> > > > @@ -381,6 +382,9 @@ static int powernv_add_idle_states(void)
> > > > }
> > > > }
> > > >
> > > > + if (flags[i] & OPAL_PM_TIMEBASE_STOP)
> > > > + stops_timebase = true;
> > > > +
> > > > /*
> > > > * For nap and fastsleep, use default target_residency
> > > > * values if f/w does not expose it.
> > > > @@ -392,8 +396,7 @@ static int powernv_add_idle_states(void)
> > > > add_powernv_state(nr_idle_states, "Nap",
> > > > CPUIDLE_FLAG_NONE, nap_loop,
> > > > target_residency, exit_latency, 0, 0);
> > > > - } else if ((flags[i] & OPAL_PM_STOP_INST_FAST) &&
> > > > - !(flags[i] & OPAL_PM_TIMEBASE_STOP)) {
> > > > + } else if (has_stop_states && !stops_timebase) {
> > > > add_powernv_state(nr_idle_states, names[i],
> > > > CPUIDLE_FLAG_NONE, stop_loop,
> > > > target_residency, exit_latency,
> > > > @@ -405,8 +408,8 @@ static int powernv_add_idle_states(void)
> > > > * within this config dependency check.
> > > > */
> > > > #ifdef CONFIG_TICK_ONESHOT
> > > > - if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
> > > > - flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
> > > > + else if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
> > > > + flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
> > >
> > > Hmm, seems okay but readability is isn't the best with the ifdef and
> > > mixing power8 and 9 cases IMO.
> > >
> > > Particularly with the nice regular POWER9 states, we're not doing much
> > > logic in this loop besides checking for the timebase stop flag, right?
> > > Would it be clearer if it was changed to something like this (untested
> > > quick hack)?
> >
> > Yes, this is very much doable. Some comments below.
> >
> > >
> > > ---
> > > drivers/cpuidle/cpuidle-powernv.c | 76 +++++++++++++++++++--------------------
> > > 1 file changed, 37 insertions(+), 39 deletions(-)
> > >
> > > diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
> > > index 12409a519cc5..77291389f9ac 100644
> > > --- a/drivers/cpuidle/cpuidle-powernv.c
> > > +++ b/drivers/cpuidle/cpuidle-powernv.c
> > > @@ -353,7 +353,9 @@ static int powernv_add_idle_states(void)
> > > }
> > >
> > > for (i = 0; i < dt_idle_states; i++) {
> > > + unsigned int cpuidle_flags = CPUIDLE_FLAG_NONE;
> > > unsigned int exit_latency, target_residency;
> > > +
> > > /*
> > > * If an idle state has exit latency beyond
> > > * POWERNV_THRESHOLD_LATENCY_NS then don't use it
> > > @@ -371,6 +373,16 @@ static int powernv_add_idle_states(void)
> > > else
> > > target_residency = 0;
> > >
> > > + if (flags[i] & OPAL_PM_TIMEBASE_STOP) {
> > > + /*
> > > + * All cpuidle states with CPUIDLE_FLAG_TIMER_STOP set
> > > + * depend on CONFIG_TICK_ONESHOT.
> > > + */
> > > + if (!IS_ENABLED(CONFIG_TICK_ONESHOT))
> > > + continue;
> > > + cpuidle_flags = CPUIDLE_FLAG_TIMER_STOP;
> >
> > Yes, this can be done. We just need to extend this condition to
> > (flags[i] & OPAL_PM_TIMEBASE_STOP || flags[i] &
> > OPAL_PM_SLEEP_ENABLED).
> >
> > Even though all the recent versions of OPAL have OPAL_PM_TIMEBASE_STOP
> > set for states which have OPAL_PM_SLEEP_ENABLED, I am not sure if
> > that was always the case and which is why we have the fastsleep case
> > explicitly coded in the kernel.
>
> Okay that makes sense, thanks for explaining.
>
> Since your patches are now merged, it's a matter of preference,
> if you want to send any cleanup patches you can take any of my
> suggestions.
>
> Thanks for the fixes!
I will incorporate your suggestion into a separate patch to do all the
device-tree parsing pertaining to the idle-bits in one place,
preferably arch/powerpc/platforms/powernv/idle.c and expose the parsed
output to any other subsystems such as cpuidle-powernv via an in
kernel data-structure. Today we do it at two separate place, once
during the idle-code initialization and another cpuidle-powernv driver
initialization.
--
Thanks and Regards
gautham.
More information about the Linuxppc-dev
mailing list