[PATCH v8 05/10] powerpc/perf: IMC pmu cpumask and cpuhotplug support
Daniel Axtens
dja at axtens.net
Tue May 9 00:12:53 AEST 2017
Hi all,
I've had a look at the API as it was a big thing I didn't like in the
earlier version.
I am much happier with this one.
Some comments:
- I'm no longer subscribed to skiboot but I've had a look at the
patches on that side:
* in patch 9 should opal_imc_counters_init return something other
than OPAL_SUCCESS in the case on invalid arguments? Maybe
OPAL_PARAMETER? (I think you fix this in a later patch anyway?)
* in start/stop, should there be some sort of write barrier to make
sure the cb->imc_chip_command actually gets written out to memory
at the time we expect?
The rest of my comments are in line.
> Adds cpumask attribute to be used by each IMC pmu. Only one cpu (any
> online CPU) from each chip for nest PMUs is designated to read counters.
>
> On CPU hotplug, dying CPU is checked to see whether it is one of the
> designated cpus, if yes, next online cpu from the same chip (for nest
> units) is designated as new cpu to read counters. For this purpose, we
> introduce a new state : CPUHP_AP_PERF_POWERPC_NEST_ONLINE.
>
> Signed-off-by: Anju T Sudhakar <anju at linux.vnet.ibm.com>
> Signed-off-by: Hemant Kumar <hemant at linux.vnet.ibm.com>
> Signed-off-by: Madhavan Srinivasan <maddy at linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/imc-pmu.h | 4 +
> arch/powerpc/include/asm/opal-api.h | 12 +-
> arch/powerpc/include/asm/opal.h | 4 +
> arch/powerpc/perf/imc-pmu.c | 248 ++++++++++++++++++++++++-
> arch/powerpc/platforms/powernv/opal-wrappers.S | 3 +
> include/linux/cpuhotplug.h | 1 +
Who owns this? get_maintainer.pl doesn't give me anything helpful
here... Do we need an Ack from anyone?
> 6 files changed, 266 insertions(+), 6 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/imc-pmu.h b/arch/powerpc/include/asm/imc-pmu.h
> index 6bbe184..1478d0f 100644
> --- a/arch/powerpc/include/asm/imc-pmu.h
> +++ b/arch/powerpc/include/asm/imc-pmu.h
> @@ -92,6 +92,10 @@ struct imc_pmu {
> #define IMC_DOMAIN_NEST 1
> #define IMC_DOMAIN_UNKNOWN -1
>
> +#define IMC_COUNTER_ENABLE 1
> +#define IMC_COUNTER_DISABLE 0
I'm not sure these constants are particularly useful any more, but I'll
have more to say on that later.
> +
> +
> extern struct perchip_nest_info nest_perchip_info[IMC_MAX_CHIPS];
> extern struct imc_pmu *per_nest_pmu_arr[IMC_MAX_PMUS];
> extern int __init init_imc_pmu(struct imc_events *events,int idx, struct imc_pmu *pmu_ptr);
> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
> index a0aa285..ce863d9 100644
> --- a/arch/powerpc/include/asm/opal-api.h
> +++ b/arch/powerpc/include/asm/opal-api.h
> @@ -168,7 +168,10 @@
> #define OPAL_INT_SET_MFRR 125
> #define OPAL_PCI_TCE_KILL 126
> #define OPAL_NMMU_SET_PTCR 127
> -#define OPAL_LAST 127
> +#define OPAL_IMC_COUNTERS_INIT 149
> +#define OPAL_IMC_COUNTERS_START 150
> +#define OPAL_IMC_COUNTERS_STOP 151
Yay, this is heaps better!
> +#define OPAL_LAST 151
>
> /* Device tree flags */
>
> @@ -928,6 +931,13 @@ enum {
> OPAL_PCI_TCE_KILL_ALL,
> };
>
> +/* Argument to OPAL_IMC_COUNTERS_* */
> +enum {
> + OPAL_IMC_COUNTERS_NEST = 1,
> + OPAL_IMC_COUNTERS_CORE = 2,
> + OPAL_IMC_COUNTERS_THREAD = 3,
> +};
> +
> #endif /* __ASSEMBLY__ */
>
> #endif /* __OPAL_API_H */
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index 1ff03a6..9c16ec6 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -227,6 +227,10 @@ int64_t opal_pci_tce_kill(uint64_t phb_id, uint32_t kill_type,
> uint64_t dma_addr, uint32_t npages);
> int64_t opal_nmmu_set_ptcr(uint64_t chip_id, uint64_t ptcr);
>
> +int64_t opal_imc_counters_init(uint32_t type, uint64_t address);
This isn't called anywhere in this patch... including (worryingly) in
the init function...
> +int64_t opal_imc_counters_start(uint32_t type);
> +int64_t opal_imc_counters_stop(uint32_t type);
> +
> /* Internal functions */
> extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
> int depth, void *data);
> diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
> index f09a37a..40792424 100644
> --- a/arch/powerpc/perf/imc-pmu.c
> +++ b/arch/powerpc/perf/imc-pmu.c
> @@ -18,6 +18,11 @@
>
> struct perchip_nest_info nest_perchip_info[IMC_MAX_CHIPS];
> struct imc_pmu *per_nest_pmu_arr[IMC_MAX_PMUS];
> +static cpumask_t nest_imc_cpumask;
> +
> +static atomic_t nest_events;
> +/* Used to avoid races in calling enable/disable nest-pmu units*/
You need a space here between s and * ----------------------------^
> +static DEFINE_MUTEX(imc_nest_reserve);
>
> /* Needed for sanity check */
> extern u64 nest_max_offset;
> @@ -33,6 +38,160 @@ static struct attribute_group imc_format_group = {
> .attrs = imc_format_attrs,
> };
>
> +/* Get the cpumask printed to a buffer "buf" */
> +static ssize_t imc_pmu_cpumask_get_attr(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + cpumask_t *active_mask;
> +
> + active_mask = &nest_imc_cpumask;
> + return cpumap_print_to_pagebuf(true, buf, active_mask);
> +}
> +
> +static DEVICE_ATTR(cpumask, S_IRUGO, imc_pmu_cpumask_get_attr, NULL);
> +
> +static struct attribute *imc_pmu_cpumask_attrs[] = {
> + &dev_attr_cpumask.attr,
> + NULL,
> +};
> +
> +static struct attribute_group imc_pmu_cpumask_attr_group = {
> + .attrs = imc_pmu_cpumask_attrs,
> +};
> +
> +/*
> + * nest_init : Initializes the nest imc engine for the current chip.
> + * by default the nest engine is disabled.
> + */
> +static void nest_init(int *cpu_opal_rc)
> +{
> + int rc;
> +
> + /*
> + * OPAL figures out which CPU to start based on the CPU that is
> + * currently running when we call into OPAL
> + */
> + rc = opal_imc_counters_stop(OPAL_IMC_COUNTERS_NEST);
Why isn't this the init call? If this is correct, a comment explaning it
would be helpful.
> + if (rc)
> + cpu_opal_rc[smp_processor_id()] = 1;
> +}
> +
> +static int nest_imc_control(int operation)
> +{
> + int *cpus_opal_rc, cpu;
> +
> + /*
> + * Memory for OPAL call return value.
> + */
> + cpus_opal_rc = kzalloc((sizeof(int) * nr_cpu_ids), GFP_KERNEL);
> + if (!cpus_opal_rc)
> + return -ENOMEM;
> + switch (operation) {
> +
> + case IMC_COUNTER_ENABLE:
> + /* Initialize Nest PMUs in each node using designated cpus */
> + on_each_cpu_mask(&nest_imc_cpumask, (smp_call_func_t)nest_imc_start,
> + (void *)cpus_opal_rc, 1);
> + break;
> + case IMC_COUNTER_DISABLE:
> + /* Disable the counters */
> + on_each_cpu_mask(&nest_imc_cpumask, (smp_call_func_t)nest_init,
> + (void *)cpus_opal_rc, 1);
> + break;
> + default: return -EINVAL;
> +
> + }
> +
> + /* Check return value array for any OPAL call failure */
> + for_each_cpu(cpu, &nest_imc_cpumask) {
> + if (cpus_opal_rc[cpu])
> + return -ENODEV;
> + }
> + return 0;
> +}
Two things:
- It doesn't look like you're freeing cpus_opal_rc anywhere - have I
missed it?
- Would it be better to split this function into two: so instead of
passing in `operation`, you just have a nest_imc_enable and
nest_imc_disable? All the call sites I can see call this with a
constant parameter anyway. Perhaps it could even be refactored into
nest_imc_event_start/stop and this method could be removed
entirely...
(I haven't checked if you use this in future patches or if it gets
expanded and makes sense to keep the function this way.)
> +
> static void imc_event_start(struct perf_event *event, int flags)
> {
> /*
> @@ -129,19 +333,44 @@ static void imc_event_stop(struct perf_event *event, int flags)
> imc_perf_event_update(event);
> }
>
> -/*
> - * The wrapper function is provided here, since we will have reserve
> - * and release lock for imc_event_start() in the following patch.
> - * Same in case of imc_event_stop().
> - */
> static void nest_imc_event_start(struct perf_event *event, int flags)
> {
> + int rc;
> +
> + /*
> + * Nest pmu units are enabled only when it is used.
> + * See if this is triggered for the first time.
> + * If yes, take the mutex lock and enable the nest counters.
> + * If not, just increment the count in nest_events.
> + */
> + if (atomic_inc_return(&nest_events) == 1) {
> + mutex_lock(&imc_nest_reserve);
> + rc = nest_imc_control(IMC_COUNTER_ENABLE);
> + mutex_unlock(&imc_nest_reserve);
> + if (rc)
> + pr_err("IMC: Unbale to start the counters\n");
Spelling: s/Unbale/Unable/ ----------^
> + }
> imc_event_start(event, flags);
> }
>
Overall I'm much happer with this now, good work :)
Regards,
Daniel
More information about the Linuxppc-dev
mailing list