[linux-next][bock] WARNING: CPU: 22 PID: 0 at block/blk-core.c:2655 .blk_update_request+0x4f8/0x500

Jens Axboe axboe at kernel.dk
Tue May 9 00:00:41 AEST 2017


On 05/08/2017 01:13 AM, Abdul Haleem wrote:
> On Fri, 2017-05-05 at 08:02 -0600, Jens Axboe wrote:
>> On 05/05/2017 12:25 AM, Abdul Haleem wrote:
>>> Hi,
>>>
>>> 4.11.0 Linus mainline booted with Warnings on PowerPC.
>>>
>>> We did not see this on next-20170407 but on next-20170410 and later.
>>
>> Have you tried current Linus -git? Both of the -next versions you list
>> are rather old.
>>
> 
> Hi Jens, 
> 
> Warning is still seen with next-20170505 and also with today's mainline.
> 
> It was first seen on next-20170410, so the last good was next-20170407.

The log between the known good and first bad version, condensed a bit for
primary suspects, is below.

Christoph Hellwig (4):
      sd: split sd_setup_discard_cmnd
      sd: implement REQ_OP_WRITE_ZEROES
      sd: implement unmapping Write Zeroes
      block: remove the discard_zeroes_data flag

Martin K. Petersen (2):
      scsi: sd: Separate zeroout and discard command choices
      scsi: sd: Remove LBPRZ dependency for discards

Christoph Hellwig (7):
      block: implement splitting of REQ_OP_WRITE_ZEROES bios
      block: stop using blkdev_issue_write_same for zeroing
      block: add a flags argument to (__)blkdev_issue_zeroout
      block: add a REQ_NOUNMAP flag for REQ_OP_WRITE_ZEROES
      block: add a new BLKDEV_ZERO_NOFALLBACK flag
      block: stop using discards for zeroing
      block: remove the discard_zeroes_data flag

Christoph, Martin - any ideas? Trace from Abdul below.

WARNING: CPU: 12 PID: 0 at block/blk-core.c:2651 .blk_update_request+0x4cc/0x4e0
Modules linked in: sg(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) binfmt_misc(E) ip_tables(E) ext4(E) mbcache(E) jbd2(E) sd_mod(E) ibmvscsi(E) scsi_transport_srp(E) ibmveth(E)
CPU: 12 PID: 0 Comm: swapper/12 Tainted: G            E   4.11.0-autotest #1
task: c0000009f455ee80 task.stack: c0000009fb2e8000
NIP: c00000000050bd1c LR: c00000000050b8ec CTR: c0000000005114b0
REGS: c0000013fff73740 TRAP: 0700   Tainted: G            E    (4.11.0-autotest)
MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>
  CR: 48042048  XER: 00000001
CFAR: c00000000050bb34 SOFTE: 1 
GPR00: c00000000050b8ec c0000013fff739c0 c000000001389c00 c0000009eca9c800
GPR04: 0000000000000000 0000000000000000 0000000000000001 0000000000000060 
GPR08: 0000000000067887 0000000000000000 c0000009eca9c800 d00000000e5f7e30 
GPR12: 0000000088044044 c00000000e9f6c00 c0000009fb2ebf90 0000000000200042 
GPR16: 00000000ffff9367 c0000013fff70000 0000000000000000 c000000000df4100 
GPR20: c0000000013c3b00 c000000000df4100 0000000000000000 0000000000000005 
GPR24: 0000000000002ee0 c0000000017789f8 0000000000000000 0000000000000000 
GPR28: 0000000000000000 c0000000038ba400 0000000000000000 c0000009eca9c800 
NIP [c00000000050bd1c] .blk_update_request+0x4cc/0x4e0
LR [c00000000050b8ec] .blk_update_request+0x9c/0x4e0
Call Trace:
[c0000013fff739c0] [c00000000050b8ec] .blk_update_request+0x9c/0x4e0 (unreliable)
[c0000013fff73a60] [c0000000006b06fc] .scsi_end_request+0x4c/0x240
[c0000013fff73b10] [c0000000006b4564] .scsi_io_completion+0x1d4/0x6c0
[c0000013fff73be0] [c0000000006a8cd0] .scsi_finish_command+0x100/0x1b0
[c0000013fff73c70] [c0000000006b3978] .scsi_softirq_done+0x188/0x1e0
[c0000013fff73d00] [c000000000516b44] .blk_done_softirq+0xc4/0xf0
[c0000013fff73d90] [c0000000000daef8] .__do_softirq+0x158/0x3b0
[c0000013fff73e90] [c0000000000db5b8] .irq_exit+0x1a8/0x1c0
[c0000013fff73f10] [c000000000014f84] .__do_irq+0x94/0x1f0
[c0000013fff73f90] [c000000000026cbc] .call_do_irq+0x14/0x24
[c0000009fb2eb7f0] [c00000000001516c] .do_IRQ+0x8c/0x100
[c0000009fb2eb890] [c000000000008bf4] hardware_interrupt_common+0x114/0x120
--- interrupt: 501 at .plpar_hcall_norets+0x14/0x20
    LR = .check_and_cede_processor+0x24/0x40
[c0000009fb2ebb80] [0000000000000002] 0x2 (unreliable)
[c0000009fb2ebbf0] [c0000000007c360c] .dedicated_cede_loop+0x4c/0x150
[c0000009fb2ebc70] [c0000000007c1040] .cpuidle_enter_state+0xb0/0x3b0
[c0000009fb2ebd20] [c00000000012d1bc] .call_cpuidle+0x3c/0x70
[c0000009fb2ebd90] [c00000000012d550] .do_idle+0x280/0x2e0
[c0000009fb2ebe50] [c00000000012d768] .cpu_startup_entry+0x28/0x40
[c0000009fb2ebed0] [c0000000000428a4] .start_secondary+0x304/0x350
[c0000009fb2ebf90] [c00000000000aa6c] start_secondary_prolog+0x10/0x14
Instruction dump:
3f82ff90 3b9cc190 4bfffd8c 3f82ff90 3b9cc1a8 4bfffd80 61290040 b13f0018
4bfffbd4 3cc2ff8b 38c63160 4bfffd9c <0fe00000> 4bfffe18 60000000 60000000 
---[ end trace 0f80359f8fb9c5f4 ]---
EXT4-fs (sda3): Delayed block allocation failed for inode 11011467 at logical offset 0 with max blocks 7 with error 121
EXT4-fs (sda3): This should not happen!! Data will be lost

-- 
Jens Axboe



More information about the Linuxppc-dev mailing list