[PATCH 4/7] powerpc/64s: fix POWER9 machine check handler from stop state

Nicholas Piggin npiggin at gmail.com
Mon Mar 20 17:01:49 AEDT 2017


The ISA specifies power save wakeup can cause a machine check interrupt.
The machine check handler currently has code to handle that for POWER8,
but POWER9 crashes when trying to execute the P8 style sleep
instructions.

So queue up the machine check, then call into the idle code to wake up
as the system reset interrupt does, rather than attempting to sleep
again without going through the main idle path.

Reviewed-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
Reviewed-by: Mahesh J Salgaonkar <mahesh at linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/include/asm/reg.h       |  1 +
 arch/powerpc/kernel/exceptions-64s.S | 80 ++++++++++++++++++++----------------
 2 files changed, 46 insertions(+), 35 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index fc879fd6bdae..8bbdfacce970 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -656,6 +656,7 @@
 #define   SRR1_ISI_PROT		0x08000000 /* ISI: Other protection fault */
 #define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
 #define   SRR1_WAKEMASK_P8	0x003c0000 /* reason for wakeup on POWER8 and 9 */
+#define   SRR1_WAKEMCE_RESVD	0x003c0000 /* Unused/reserved value used by MCE wakeup to indicate cause to idle wakeup handler */
 #define   SRR1_WAKESYSERR	0x00300000 /* System error */
 #define   SRR1_WAKEEE		0x00200000 /* External interrupt */
 #define   SRR1_WAKEHVI		0x00240000 /* Hypervisor Virtualization Interrupt (P9) */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index bef9b04a3b2d..0d379bd36808 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -306,6 +306,44 @@ EXC_COMMON_BEGIN(machine_check_common)
 	/* restore original r1. */			\
 	ld	r1,GPR1(r1)
 
+#ifdef CONFIG_PPC_P7_NAP
+EXC_COMMON_BEGIN(machine_check_idle_common)
+	bl	machine_check_queue_event
+	/*
+	 * Queue the machine check, then reload SRR1 and use it to set
+	 * CR3 according to pnv_powersave_wakeup convention.
+	 */
+	ld	r12,_MSR(r1)
+	rlwinm	r11,r12,47-31,30,31
+	cmpwi	cr3,r11,2
+
+	li	r11,1
+	stb	r11,PACA_NAPSTATELOST(r13)
+
+	/*
+	 * Now put SRR1_WAKEMCE_RESVD into SRR1, allows it to follow the
+	 * system reset wakeup code.
+	 */
+	oris	r12,r12,SRR1_WAKEMCE_RESVD at h
+	mtspr	SPRN_SRR1,r12
+	std	r12,_MSR(r1)
+
+	/*
+	 * We have not used any non-volatile GPRs here, and as a rule
+	 * most exception code including machine check does not. Therefore
+	 * PACA_NAPSTATELOST does not need to be set. Non-volatile cr3 has
+	 * been set, above, but the idle machine
+	 * check code does not
+	 * Ask the idle code to restore non-volatile GPR registers too.
+	 * Machine check exception code
+	 *
+	 * Decrement MCE nesting after finishing with the stack.
+	 */
+	lhz	r11,PACA_IN_MCE(r13)
+	subi	r11,r11,1
+	sth	r11,PACA_IN_MCE(r13)
+	b	pnv_powersave_wakeup
+#endif
 	/*
 	 * Handle machine check early in real mode. We come here with
 	 * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
@@ -318,6 +356,7 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	bl	machine_check_early
 	std	r3,RESULT(r1)	/* Save result */
 	ld	r12,_MSR(r1)
+
 #ifdef	CONFIG_PPC_P7_NAP
 	/*
 	 * Check if thread was in power saving mode. We come here when any
@@ -328,43 +367,14 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	 *
 	 * Go back to nap/sleep/winkle mode again if (b) is true.
 	 */
-	rlwinm.	r11,r12,47-31,30,31	/* Was it in power saving mode? */
-	beq	4f			/* No, it wasn't */
-	/* Thread was in power saving mode. Go back to nap again. */
-	cmpwi	r11,2
-	blt	3f
-	/* Supervisor/Hypervisor state loss */
-	li	r0,1
-	stb	r0,PACA_NAPSTATELOST(r13)
-3:	bl	machine_check_queue_event
-	MACHINE_CHECK_HANDLER_WINDUP
-	GET_PACA(r13)
-	ld	r1,PACAR1(r13)
-	/*
-	 * Check what idle state this CPU was in and go back to same mode
-	 * again.
-	 */
-	lbz	r3,PACA_THREAD_IDLE_STATE(r13)
-	cmpwi	r3,PNV_THREAD_NAP
-	bgt	10f
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
-	/* No return */
-10:
-	cmpwi	r3,PNV_THREAD_SLEEP
-	bgt	2f
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
-	/* No return */
-
-2:
-	/*
-	 * Go back to winkle. Please note that this thread was woken up in
-	 * machine check from winkle and have not restored the per-subcore
-	 * state.
-	 */
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
-	/* No return */
+	BEGIN_FTR_SECTION
+	rlwinm.	r11,r12,47-31,30,31
+	beq-	4f
+	BRANCH_TO_COMMON(r10, machine_check_idle_common)
 4:
+	END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
 #endif
+
 	/*
 	 * Check if we are coming from hypervisor userspace. If yes then we
 	 * continue in host kernel in V mode to deliver the MC event.
-- 
2.11.0



More information about the Linuxppc-dev mailing list