[PATCH 2/3] powernv:idle: Don't override default/deepest directly in kernel
Gautham R Shenoy
ego at linux.vnet.ibm.com
Wed Mar 15 22:11:04 AEDT 2017
Hi Nick,
Thanks for reviewing the patch.
On Wed, Mar 15, 2017 at 12:05:43AM +1000, Nicholas Piggin wrote:
> On Mon, 13 Mar 2017 11:31:27 +0530
> "Gautham R. Shenoy" <ego at linux.vnet.ibm.com> wrote:
>
> > From: "Gautham R. Shenoy" <ego at linux.vnet.ibm.com>
> >
> > Currently during idle-init on power9, if we don't find suitable stop
> > states in the device tree that can be used as the
> > default_stop/deepest_stop, we set stop0 (ESL=1,EC=1) as the default
> > stop state psscr to be used by power9_idle and deepest stop state
> > which is used by CPU-Hotplug.
> >
> > However, if the platform firmware has not configured or enabled a stop
> > state, the kernel should not make any assumptions and fallback to a
> > default choice.
> >
> > If the kernel uses a stop state that is not configured by the platform
> > firmware, it may lead to further failures which should be avoided.
> >
> > In this patch, we modify the init code to ensure that the kernel uses
> > only the stop states exposed by the firmware through the device
> > tree. When a suitable default stop state isn't found, we disable
> > ppc_md.power_save for power9. Similarly, when a suitable
> > deepest_stop_state is not found in the device tree exported by the
> > firmware, fall back to the default busy-wait loop in the CPU-Hotplug
> > code.
>
> Seems reasonable. I have a few comments that you may consider. Nothing
> too major.
>
> Btw., it would be nice to move this hotplug idling selection code to
> idle.c. Have the hotplug just ask to enter the best available idle mode
> and that's it. I'm not asking you to do that for this series, but perhaps
> consider it for the future.
That's not a bad idea. I will do it in the respin of the patchset.
>
>
> > diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> > index 4ee837e..9fde6e4 100644
> > --- a/arch/powerpc/platforms/powernv/idle.c
> > +++ b/arch/powerpc/platforms/powernv/idle.c
> > @@ -147,7 +147,6 @@ u32 pnv_get_supported_cpuidle_states(void)
> > }
> > EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
> >
> > -
> > static void pnv_fastsleep_workaround_apply(void *info)
> >
> > {
> > @@ -243,6 +242,7 @@ static DEVICE_ATTR(fastsleep_workaround_applyonce, 0600,
> > */
> > u64 pnv_default_stop_val;
> > u64 pnv_default_stop_mask;
> > +bool default_stop_found;
> >
> > /*
> > * Used for ppc_md.power_save which needs a function with no parameters
> > @@ -264,6 +264,7 @@ static void power9_idle(void)
> > */
> > u64 pnv_deepest_stop_psscr_val;
> > u64 pnv_deepest_stop_psscr_mask;
> > +bool deepest_stop_found;
> >
> > /*
> > * Power ISA 3.0 idle initialization.
>
> If the hotplug idle code was in idle.c, then all this deepest/default stop
> logic and register settings would be static to idle.c, which would be nice.
>
> If you have a function to check if deepest stop is found, then you don't need
> a non-static variable here (or for default_stop_found AFAIKS).
Sure!
>
>
> > @@ -352,7 +353,6 @@ static int __init pnv_power9_idle_init(struct device_node *np, u32 *flags,
> > u32 *residency_ns = NULL;
> > u64 max_residency_ns = 0;
> > int rc = 0, i;
> > - bool default_stop_found = false, deepest_stop_found = false;
> >
> > psscr_val = kcalloc(dt_idle_states, sizeof(*psscr_val), GFP_KERNEL);
> > psscr_mask = kcalloc(dt_idle_states, sizeof(*psscr_mask), GFP_KERNEL);
> > @@ -433,20 +433,22 @@ static int __init pnv_power9_idle_init(struct device_node *np, u32 *flags,
> > }
> >
> > if (!default_stop_found) {
> > - pnv_default_stop_val = PSSCR_HV_DEFAULT_VAL;
> > - pnv_default_stop_mask = PSSCR_HV_DEFAULT_MASK;
> > - pr_warn("Setting default stop psscr val=0x%016llx,mask=0x%016llx\n",
> > + pr_warn("powernv:idle: Default stop not found. Disabling ppcmd.powersave\n");
> > + } else {
> > + pr_info("powernv:idle: Default stop: psscr = 0x%016llx,mask=0x%016llx\n",
> > pnv_default_stop_val, pnv_default_stop_mask);
> > }
> >
> > if (!deepest_stop_found) {
> > - pnv_deepest_stop_psscr_val = PSSCR_HV_DEFAULT_VAL;
> > - pnv_deepest_stop_psscr_mask = PSSCR_HV_DEFAULT_MASK;
> > - pr_warn("Setting default stop psscr val=0x%016llx,mask=0x%016llx\n",
> > + pr_warn("powernv:idle: Deepest stop not found. CPU-Hotplug is affected\n");
>
> I guess these warnings are meant for developers, but it might be nice
> to make them slightly more meaningful? Prefix of choice seems to be
> "cpuidle-powernv:"
>
> Then you could have "no suitable stop state provided by firmware. Disabling
> idle power saving" and "no suitable stop state provided by firmware. Offlined
> CPUs will busy-wait", perhaps?
How about
pr_warn("cpuidle-powernv: No suitable stop for CPU-Hotplug. Offlined CPUs will busy wait\n");
>
> Just a suggestion.
>
> > + } else {
> > + pr_info("powernv:idle: Deepest stop: psscr = 0x%016llx,mask=0x%016llx\n",
> > pnv_deepest_stop_psscr_val,
> > pnv_deepest_stop_psscr_mask);
> > }
> >
> > + pr_info("powernv:idle: RL value of first deep stop = 0x%llx\n",
> > + pnv_first_deep_stop_state);
>
> cpuidle-powernv: prefix for these too?
Will fix.
>
> > out:
> > kfree(psscr_val);
> > kfree(psscr_mask);
> > @@ -454,6 +456,12 @@ static int __init pnv_power9_idle_init(struct device_node *np, u32 *flags,
> > return rc;
> > }
> >
> > +bool pnv_check_deepest_stop(void)
> > +{
> > + return deepest_stop_found;
> > +}
> > +EXPORT_SYMBOL_GPL(pnv_check_deepest_stop);
>
> Does this need to be exported? AFAIKS it's not used in a module.
No, it is not used in a module. Will get rid of it.
>
> > +
> > /*
> > * Probe device tree for supported idle states
> > */
> > @@ -526,7 +534,8 @@ static int __init pnv_init_idle_states(void)
> >
> > if (supported_cpuidle_states & OPAL_PM_NAP_ENABLED)
> > ppc_md.power_save = power7_idle;
> > - else if (supported_cpuidle_states & OPAL_PM_STOP_INST_FAST)
> > + else if ((supported_cpuidle_states & OPAL_PM_STOP_INST_FAST) &&
> > + default_stop_found)
> > ppc_md.power_save = power9_idle;
> >
> > out:
>
> Is this the only use of default_stop_found? & OPAL_PM_STOP_INST_FAST
> should always be the same as default_stop_found value, no? In that case
> can you just remove the OPAL_PM_STOP_INST_FAST test here? (I like the
> boolean and prefer the default idle state selection logic to stay in the
> idle init above where you have it commented).
Yup. You are right, the check is redundant. We only consider
STOP_INST_FAST states for default in power9_idle_init(). Will fix this
and move initialization of ppc_md.power_save to the init function.
>
>
> > diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
> > index 6130522..9acd5eb 100644
> > --- a/arch/powerpc/platforms/powernv/powernv.h
> > +++ b/arch/powerpc/platforms/powernv/powernv.h
> > @@ -18,6 +18,7 @@ static inline void pnv_pci_shutdown(void) { }
> > #endif
> >
> > extern u32 pnv_get_supported_cpuidle_states(void);
> > +bool pnv_check_deepest_stop(void);
> > extern u64 pnv_deepest_stop_psscr_val;
> > extern u64 pnv_deepest_stop_psscr_mask;
> >
> > diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
> > index 8d5b99e..3f66e6f 100644
> > --- a/arch/powerpc/platforms/powernv/smp.c
> > +++ b/arch/powerpc/platforms/powernv/smp.c
> > @@ -140,6 +140,7 @@ static void pnv_smp_cpu_kill_self(void)
> > unsigned int cpu;
> > unsigned long srr1, wmask;
> > u32 idle_states;
> > + bool deepest_stop_found;
> >
> > /* Standard hot unplug procedure */
> > local_irq_disable();
> > @@ -155,6 +156,7 @@ static void pnv_smp_cpu_kill_self(void)
> > wmask = SRR1_WAKEMASK_P8;
> >
> > idle_states = pnv_get_supported_cpuidle_states();
> > + deepest_stop_found = pnv_check_deepest_stop();
> >
> > /* We don't want to take decrementer interrupts while we are offline,
> > * so clear LPCR:PECE1. We keep PECE2 (and LPCR_PECE_HVEE on P9)
> > @@ -184,7 +186,11 @@ static void pnv_smp_cpu_kill_self(void)
> >
> > ppc64_runlatch_off();
> >
> > - if (cpu_has_feature(CPU_FTR_ARCH_300)) {
> > + if (cpu_has_feature(CPU_FTR_ARCH_300) && deepest_stop_found) {
> > + pr_info("CPU %u offlining with psscr = 0x%016llx\n",
> > + cpu, pnv_deepest_stop_psscr_val);
> > + pr_info("CPU%d down paca pir %016x pir %lx\n",
> > + cpu, hard_smp_processor_id(), mfspr(SPRN_PIR));
>
> How much log info is appropriate here?
This should have been pr_debug. I will clean up this part.
>
> > srr1 = power9_idle_stop(pnv_deepest_stop_psscr_val,
> > pnv_deepest_stop_psscr_mask);
> > } else if (idle_states & OPAL_PM_WINKLE_ENABLED) {
>
--
Thanks and Regards
gautham.
More information about the Linuxppc-dev
mailing list