[net-next v2 09/10] dpaa_eth: enable multiple Tx traffic classes

[Madalin Bucur]

From: Camelia Groza <camelia.groza at nxp.com>

Implement the setup_tc ndo to configure prioritised Tx traffic classes.
Priorities range from 0 (lowest) to 3 (highest). The driver assigns
NR_CPUS queues to each traffic class.

Signed-off-by: Camelia Groza <camelia.groza at nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur at nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 36 ++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index ac75d09..1b3ea38 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -342,6 +342,41 @@ static void dpaa_get_stats64(struct net_device *net_dev,
 	}
 }
 
+static int dpaa_setup_tc(struct net_device *net_dev, u32 handle, __be16 proto,
+			 struct tc_to_netdev *tc)
+{
+	struct dpaa_priv *priv = netdev_priv(net_dev);
+	int i;
+
+	if (tc->type != TC_SETUP_MQPRIO)
+		return -EINVAL;
+
+	if (tc->tc == priv->num_tc)
+		return 0;
+
+	if (!tc->tc) {
+		netdev_reset_tc(net_dev);
+		goto out;
+	}
+
+	if (tc->tc > DPAA_TC_NUM) {
+		netdev_err(net_dev, "Too many traffic classes: max %d supported.\n",
+			   DPAA_TC_NUM);
+		return -EINVAL;
+	}
+
+	netdev_set_num_tc(net_dev, tc->tc);
+
+	for (i = 0; i < tc->tc; i++)
+		netdev_set_tc_queue(net_dev, i, DPAA_TC_TXQ_NUM,
+				    i * DPAA_TC_TXQ_NUM);
+
+out:
+	priv->num_tc = tc->tc ? tc->tc : 1;
+	netif_set_real_num_tx_queues(net_dev, priv->num_tc * DPAA_TC_TXQ_NUM);
+	return 0;
+}
+
 static struct mac_device *dpaa_mac_dev_get(struct platform_device *pdev)
 {
 	struct platform_device *of_dev;
@@ -2417,6 +2452,7 @@ static const struct net_device_ops dpaa_ops = {
 	.ndo_validate_addr = eth_validate_addr,
 	.ndo_set_rx_mode = dpaa_set_rx_mode,
 	.ndo_do_ioctl = dpaa_ioctl,
+	.ndo_setup_tc = dpaa_setup_tc,
 };
 
 static int dpaa_napi_add(struct net_device *net_dev)
-- 
2.1.0