[PATCH v2] powerpc/powernv: Enable PCI peer-to-peer

[Frederic Barrat]

Le 27/06/2017 à 14:32, David Laight a écrit :
> From: Frederic Barrat
>> Sent: 26 June 2017 19:09
>> P9 has support for PCI peer-to-peer, enabling a device to write in the
>> mmio space of another device directly, without interrupting the CPU.
>>
>> This patch adds support for it on powernv, by adding a new API to be
>> called by drivers. The pnv_pci_set_p2p(...) call configures an
>> 'initiator', i.e the device which will issue the mmio operation, and a
>> 'target', i.e. the device on the receiving side.
> ...
> 
> Two questions:
> 
> 1) How does the driver get the correct address to give to the 'initiator'
>     in order to perform an access to the 'target'?

That's left out of this patch intentionally. The assumption is that 
there's some handshake happening between the 2 drivers. But that's an 
area where we could work to make it easier in the future.

> 2) Surely the API call the driver makes should be architecture neutral,
>     returning an error on other architectures.

The point of the patch is just to enable it on p9. I've heard of a more 
generic, on-going effort, at the PCI API level, which would be 
cross-arch. But here we just want to allow it for p9 to allow some early 
drivers to take advantage of it if they choose to.

   Fred


> At least some x86 cpus also support peer-to-peer writes,
> I believe they can work between cpu chips.
> PCIe bridges might support them (or be configurable to support them).
> 
> 	David
>