[PATCH 1/2] fsl/fman: propagate dma_ops

Madalin-cristian Bucur madalin.bucur at nxp.com
Tue Jun 27 16:49:06 AEST 2017


> -----Original Message-----
> From: geert.uytterhoeven at gmail.com [mailto:geert.uytterhoeven at gmail.com]
> On Behalf Of Geert Uytterhoeven
> Sent: Monday, June 26, 2017 7:24 PM
> To: Madalin-cristian Bucur <madalin.bucur at nxp.com>
> Cc: netdev at vger.kernel.org; David S. Miller <davem at davemloft.net>;
> linuxppc-dev at lists.ozlabs.org; linux-kernel at vger.kernel.org
> Subject: Re: [PATCH 1/2] fsl/fman: propagate dma_ops
> 
> Hi Madalin,
> 
> On Mon, Jun 26, 2017 at 4:55 PM, Madalin-cristian Bucur
> <madalin.bucur at nxp.com> wrote:
> >> -----Original Message-----
> >> From: geert.uytterhoeven at gmail.com
> [mailto:geert.uytterhoeven at gmail.com]
> >> On Behalf Of Geert Uytterhoeven
> >> Sent: Monday, June 26, 2017 10:49 AM
> >> To: Madalin-cristian Bucur <madalin.bucur at nxp.com>
> >> Cc: netdev at vger.kernel.org; David S. Miller <davem at davemloft.net>;
> >> linuxppc-dev at lists.ozlabs.org; linux-kernel at vger.kernel.org
> >> Subject: Re: [PATCH 1/2] fsl/fman: propagate dma_ops
> >>
> > On Mon, Jun 19, 2017 at 5:04 PM, Madalin Bucur <madalin.bucur at nxp.com>
> >> wrote:
> >> > Make sure dma_ops are set, to be later used by the Ethernet driver.
> >> >
> >> > Signed-off-by: Madalin Bucur <madalin.bucur at nxp.com>
> >> > ---
> >> >  drivers/net/ethernet/freescale/fman/mac.c | 2 ++
> >> >  1 file changed, 2 insertions(+)
> >> >
> >> > diff --git a/drivers/net/ethernet/freescale/fman/mac.c
> >> b/drivers/net/ethernet/freescale/fman/mac.c
> >> > index 0b31f85..6e67d22f 100644
> >> > --- a/drivers/net/ethernet/freescale/fman/mac.c
> >> > +++ b/drivers/net/ethernet/freescale/fman/mac.c
> >> > @@ -623,6 +623,8 @@ static struct platform_device
> >> *dpaa_eth_add_device(int fman_id,
> >> >                 goto no_mem;
> >> >         }
> >> >
> >> > +       set_dma_ops(&pdev->dev, get_dma_ops(priv->dev));
> >> > +
> >>
> >> When compile-testing with f NO_DMA=y:
> >>
> >>     drivers/net/ethernet/freescale/fman/mac.c: In function
> >> ‘dpaa_eth_add_device’:
> >>     drivers/net/ethernet/freescale/fman/mac.c:626: error: implicit
> >> declaration of function ‘set_dma_ops’
> >>
> >> Reverting commit 5567e989198b5a8d fixes this regression in v4.12-rc7.
> >>
> >> Why is this change needed?
> >> There's no single other call to the DMA API in this file?
> >
> > We're setting here the dma_ops that are later used in the other
> driver/patch.
> > The problem is we now depend upon DMA but do not explicitly declare it:
> >
> > <<Code that depends on the dma-mapping API needs to set 'depends on
> HAS_DMA'
> > in its Kconfig>>
> 
> Sure. But only if the driver really uses DMA.
> I can stick a set_dma_ops() call in whatever driver, but that doesn't
> mean it will
> suddenly use DMA.
> Why does the FMan driver suddenly has a dependency on DMA, if it doesn't
> use DMA?
> 
> > I'll need to add this to the FMan driver Kconfig.
> 
> Why does the FMan driver need this?
> Why can't his call be done in the driver that uses the DMA APIO?

The DPAA Ethernet driver makes use of DMA ops. It used to get them from
an API call (arch_setup_dma_ops) that was not exported. The DPAA Ethernet
that makes use of the FMan devices does not get the dma_ops as it does not
probe neither as an OF platform device nor thorough ACPI. It probes as a
platform device based on information prepared by the FMan driver. What the
FMan change [1] does is supplement the information shared with the Ethernet
driver with the dma_ops that the FMan driver gets during OF probing. There
are no scenarios one can use the DPAA drivers with NO_DMA, as far as I know.

For general info on the DPAA drivers please refer to the documentation
found in Documentation/networking/dpaa.txt. For the probing of the Ethernet
driver see change [2] and dpaa_eth_add_device() in fsl/fman, dpaa_eth_probe()
in dpaa_eth.
 
[1] 5567e989198b5a8d fsl/fman: propagate dma_ops
[2] fb52728a9294d97d dpaa_eth: reuse the dma_ops provided by the FMan MAC device

> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker.
> But
> when I'm talking to journalists I just say "programmer" or something like
> that.
>                                 -- Linus Torvalds

Thanks,
Madalin


More information about the Linuxppc-dev mailing list