[PATCH 17/17] cxlflash: Update TMF command processing
Uma Krishnan
ukrishn at linux.vnet.ibm.com
Thu Jun 22 12:16:54 AEST 2017
From: "Matthew R. Ochs" <mrochs at linux.vnet.ibm.com>
Currently, the SCSI command presented to the device reset handler is used
to send TMFs to the AFU for a device reset. This behavior is incorrect as
the command presented is an actual command and not a special notification.
As such, it should only be used for reference and not be acted upon.
Additionally, the existing TMF transmission routine does not account for
actual errors from the hardware, only reflecting failure when a timeout
occurs. This can lead to a condition where the device reset handler is
presented with a false 'success'.
Update send_tmf() to dynamically allocate a private command for sending
the TMF command and properly reflect failure when the completed command
indicates an error or was aborted. Detect TMF commands during response
processing and avoid scsi_done() for these types of commands. Lastly,
update comments in the TMF processing paths to describe the new behavior.
Signed-off-by: Matthew R. Ochs <mrochs at linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn at linux.vnet.ibm.com>
---
drivers/scsi/cxlflash/main.c | 65 ++++++++++++++++++++++++++++++--------------
1 file changed, 44 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 4338982..7a787b6 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -155,9 +155,10 @@ static void process_cmd_err(struct afu_cmd *cmd, struct scsi_cmnd *scp)
* cmd_complete() - command completion handler
* @cmd: AFU command that has completed.
*
- * Prepares and submits command that has either completed or timed out to
- * the SCSI stack. Checks AFU command back into command pool for non-internal
- * (cmd->scp populated) commands.
+ * For SCSI commands this routine prepares and submits commands that have
+ * either completed or timed out to the SCSI stack. For internal commands
+ * (TMF or AFU), this routine simply notifies the originator that the
+ * command has completed.
*/
static void cmd_complete(struct afu_cmd *cmd)
{
@@ -167,7 +168,6 @@ static void cmd_complete(struct afu_cmd *cmd)
struct cxlflash_cfg *cfg = afu->parent;
struct device *dev = &cfg->dev->dev;
struct hwq *hwq = get_hwq(afu, cmd->hwq_index);
- bool cmd_is_tmf;
spin_lock_irqsave(&hwq->hsq_slock, lock_flags);
list_del(&cmd->list);
@@ -180,19 +180,14 @@ static void cmd_complete(struct afu_cmd *cmd)
else
scp->result = (DID_OK << 16);
- cmd_is_tmf = cmd->cmd_tmf;
-
dev_dbg_ratelimited(dev, "%s:scp=%p result=%08x ioasc=%08x\n",
__func__, scp, scp->result, cmd->sa.ioasc);
-
scp->scsi_done(scp);
-
- if (cmd_is_tmf) {
- spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
- cfg->tmf_active = false;
- wake_up_all_locked(&cfg->tmf_waitq);
- spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
- }
+ } else if (cmd->cmd_tmf) {
+ spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
+ cfg->tmf_active = false;
+ wake_up_all_locked(&cfg->tmf_waitq);
+ spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
} else
complete(&cmd->cevent);
}
@@ -206,8 +201,10 @@ static void cmd_complete(struct afu_cmd *cmd)
*/
static void flush_pending_cmds(struct hwq *hwq)
{
+ struct cxlflash_cfg *cfg = hwq->afu->parent;
struct afu_cmd *cmd, *tmp;
struct scsi_cmnd *scp;
+ ulong lock_flags;
list_for_each_entry_safe(cmd, tmp, &hwq->pending_cmds, list) {
/* Bypass command when on a doneq, cmd_complete() will handle */
@@ -222,7 +219,15 @@ static void flush_pending_cmds(struct hwq *hwq)
scp->scsi_done(scp);
} else {
cmd->cmd_aborted = true;
- complete(&cmd->cevent);
+
+ if (cmd->cmd_tmf) {
+ spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
+ cfg->tmf_active = false;
+ wake_up_all_locked(&cfg->tmf_waitq);
+ spin_unlock_irqrestore(&cfg->tmf_slock,
+ lock_flags);
+ } else
+ complete(&cmd->cevent);
}
}
}
@@ -455,24 +460,35 @@ static u32 cmd_to_target_hwq(struct Scsi_Host *host, struct scsi_cmnd *scp,
/**
* send_tmf() - sends a Task Management Function (TMF)
* @afu: AFU to checkout from.
- * @scp: SCSI command from stack.
+ * @scp: SCSI command from stack describing target.
* @tmfcmd: TMF command to send.
*
* Return:
- * 0 on success, SCSI_MLQUEUE_HOST_BUSY on failure
+ * 0 on success, SCSI_MLQUEUE_HOST_BUSY or -errno on failure
*/
static int send_tmf(struct afu *afu, struct scsi_cmnd *scp, u64 tmfcmd)
{
struct Scsi_Host *host = scp->device->host;
struct cxlflash_cfg *cfg = shost_priv(host);
- struct afu_cmd *cmd = sc_to_afucz(scp);
+ struct afu_cmd *cmd = NULL;
struct device *dev = &cfg->dev->dev;
int hwq_index = cmd_to_target_hwq(host, scp, afu);
struct hwq *hwq = get_hwq(afu, hwq_index);
+ char *buf = NULL;
ulong lock_flags;
int rc = 0;
ulong to;
+ buf = kzalloc(sizeof(*cmd) + __alignof__(*cmd) - 1, GFP_KERNEL);
+ if (unlikely(!buf)) {
+ dev_err(dev, "%s: no memory for command\n", __func__);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ cmd = (struct afu_cmd *)PTR_ALIGN(buf, __alignof__(*cmd));
+ INIT_LIST_HEAD(&cmd->queue);
+
/* When Task Management Function is active do not send another */
spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
if (cfg->tmf_active)
@@ -482,7 +498,6 @@ static int send_tmf(struct afu *afu, struct scsi_cmnd *scp, u64 tmfcmd)
cfg->tmf_active = true;
spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
- cmd->scp = scp;
cmd->parent = afu;
cmd->cmd_tmf = true;
cmd->hwq_index = hwq_index;
@@ -511,12 +526,20 @@ static int send_tmf(struct afu *afu, struct scsi_cmnd *scp, u64 tmfcmd)
cfg->tmf_slock,
to);
if (!to) {
- cfg->tmf_active = false;
dev_err(dev, "%s: TMF timed out\n", __func__);
- rc = -1;
+ rc = -ETIMEDOUT;
+ } else if (cmd->cmd_aborted) {
+ dev_err(dev, "%s: TMF aborted\n", __func__);
+ rc = -EAGAIN;
+ } else if (cmd->sa.ioasc) {
+ dev_err(dev, "%s: TMF failed ioasc=%08x\n",
+ __func__, cmd->sa.ioasc);
+ rc = -EIO;
}
+ cfg->tmf_active = false;
spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
out:
+ kfree(buf);
return rc;
}
--
2.1.0
More information about the Linuxppc-dev
mailing list