[RFC v2 01/12] powerpc: Free up four 64K PTE bits in 4K backed hpte pages.
Ram Pai
linuxram at us.ibm.com
Wed Jun 21 19:30:00 AEST 2017
On Wed, Jun 21, 2017 at 12:11:32PM +0530, Aneesh Kumar K.V wrote:
> Ram Pai <linuxram at us.ibm.com> writes:
>
> > Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6
> > in the 4K backed hpte pages. These bits continue to be used
> > for 64K backed hpte pages in this patch, but will be freed
> > up in the next patch.
> >
> > The patch does the following change to the 64K PTE format
> >
> > H_PAGE_BUSY moves from bit 3 to bit 9
> > H_PAGE_F_SECOND which occupied bit 4 moves to the second part
> > of the pte.
> > H_PAGE_F_GIX which occupied bit 5, 6 and 7 also moves to the
> > second part of the pte.
> >
> > the four bits((H_PAGE_F_SECOND|H_PAGE_F_GIX) that represent a slot
> > is initialized to 0xF indicating an invalid slot. If a hpte
> > gets cached in a 0xF slot(i.e 7th slot of secondary), it is
> > released immediately. In other words, even though 0xF is a
> > valid slot we discard and consider it as an invalid
> > slot;i.e hpte_soft_invalid(). This gives us an opportunity to not
> > depend on a bit in the primary PTE in order to determine the
> > validity of a slot.
> >
> > When we release a hpte in the 0xF slot we also release a
> > legitimate primary slot and unmap that entry. This is to
> > ensure that we do get a legimate non-0xF slot the next time we
> > retry for a slot.
> >
> > Though treating 0xF slot as invalid reduces the number of available
> > slots and may have an effect on the performance, the probabilty
> > of hitting a 0xF is extermely low.
> >
> > Compared to the current scheme, the above described scheme reduces
> > the number of false hash table updates significantly and has the
> > added advantage of releasing four valuable PTE bits for other
> > purpose.
> >
> > This idea was jointly developed by Paul Mackerras, Aneesh, Michael
> > Ellermen and myself.
> >
> > 4K PTE format remain unchanged currently.
> >
> > Signed-off-by: Ram Pai <linuxram at us.ibm.com>
> > ---
> > arch/powerpc/include/asm/book3s/64/hash-4k.h | 20 +++++++
> > arch/powerpc/include/asm/book3s/64/hash-64k.h | 32 +++++++----
> > arch/powerpc/include/asm/book3s/64/hash.h | 15 +++--
> > arch/powerpc/include/asm/book3s/64/mmu-hash.h | 5 ++
> > arch/powerpc/mm/dump_linuxpagetables.c | 3 +-
> > arch/powerpc/mm/hash64_4k.c | 14 ++---
> > arch/powerpc/mm/hash64_64k.c | 81 ++++++++++++---------------
> > arch/powerpc/mm/hash_utils_64.c | 30 +++++++---
> > 8 files changed, 122 insertions(+), 78 deletions(-)
> >
> > diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
> > index b4b5e6b..5ef1d81 100644
> > --- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
> > +++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
> > @@ -16,6 +16,18 @@
> > #define H_PUD_TABLE_SIZE (sizeof(pud_t) << H_PUD_INDEX_SIZE)
> > #define H_PGD_TABLE_SIZE (sizeof(pgd_t) << H_PGD_INDEX_SIZE)
> >
> > +
> > +/*
> > + * Only supported by 4k linux page size
> > + */
> > +#define H_PAGE_F_SECOND _RPAGE_RSV2 /* HPTE is in 2ndary HPTEG */
> > +#define H_PAGE_F_GIX (_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
> > +#define H_PAGE_F_GIX_SHIFT 56
> > +
> > +#define H_PAGE_BUSY _RPAGE_RSV1 /* software: PTE & hash are busy */
> > +#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */
> > +
> > +
> > /* PTE flags to conserve for HPTE identification */
> > #define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | \
> > H_PAGE_F_SECOND | H_PAGE_F_GIX)
> > @@ -48,6 +60,14 @@ static inline int hash__hugepd_ok(hugepd_t hpd)
> > }
> > #endif
> >
> > +static inline unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
> > + unsigned int subpg_index, unsigned long slot)
> > +{
> > + return (slot << H_PAGE_F_GIX_SHIFT) &
> > + (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> > +}
> > +
> > +
> > #ifdef CONFIG_TRANSPARENT_HUGEPAGE
> >
> > static inline char *get_hpte_slot_array(pmd_t *pmdp)
> > diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
> > index 9732837..0eb3c89 100644
> > --- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
> > +++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
> > @@ -10,23 +10,25 @@
> > * 64k aligned address free up few of the lower bits of RPN for us
> > * We steal that here. For more deatils look at pte_pfn/pfn_pte()
> > */
> > -#define H_PAGE_COMBO _RPAGE_RPN0 /* this is a combo 4k page */
> > -#define H_PAGE_4K_PFN _RPAGE_RPN1 /* PFN is for a single 4k page */
> > +#define H_PAGE_COMBO _RPAGE_RPN0 /* this is a combo 4k page */
> > +#define H_PAGE_4K_PFN _RPAGE_RPN1 /* PFN is for a single 4k page */
> > +#define H_PAGE_F_SECOND _RPAGE_RSV2 /* HPTE is in 2ndary HPTEG */
> > +#define H_PAGE_F_GIX (_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
> > +#define H_PAGE_F_GIX_SHIFT 56
> > +
> > +
> > +#define H_PAGE_BUSY _RPAGE_RPN42 /* software: PTE & hash are busy */
> > +#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */
> > +
> > /*
> > * We need to differentiate between explicit huge page and THP huge
> > * page, since THP huge page also need to track real subpage details
> > */
> > #define H_PAGE_THP_HUGE H_PAGE_4K_PFN
> >
> > -/*
> > - * Used to track subpage group valid if H_PAGE_COMBO is set
> > - * This overloads H_PAGE_F_GIX and H_PAGE_F_SECOND
> > - */
> > -#define H_PAGE_COMBO_VALID (H_PAGE_F_GIX | H_PAGE_F_SECOND)
> > -
> > /* PTE flags to conserve for HPTE identification */
> > -#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_F_SECOND | \
> > - H_PAGE_F_GIX | H_PAGE_HASHPTE | H_PAGE_COMBO)
> > +#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | H_PAGE_COMBO)
>
> Why in this patch ? This is related to 64K pte
>
Yes its in the wrong patch. Have fixed it in my new series.
>
> > +
> > /*
> > * we support 16 fragments per PTE page of 64K size.
> > */
> > @@ -74,6 +76,16 @@ static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
> > return (pte_val(rpte.pte) >> H_PAGE_F_GIX_SHIFT) & 0xf;
> > }
> >
> > +static inline unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
> > + unsigned int subpg_index, unsigned long slot)
> > +{
> > + unsigned long *hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
> > +
> > + rpte.hidx &= ~(0xfUL << (subpg_index << 2));
> > + *hidxp = rpte.hidx | (slot << (subpg_index << 2));
> > + return 0x0UL;
> > +}
> > +
> > #define __rpte_to_pte(r) ((r).pte)
> > extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index);
> > /*
> > diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
> > index 4e957b0..e7cf03a 100644
> > --- a/arch/powerpc/include/asm/book3s/64/hash.h
> > +++ b/arch/powerpc/include/asm/book3s/64/hash.h
> > @@ -8,11 +8,8 @@
> > *
> > */
> > #define H_PTE_NONE_MASK _PAGE_HPTEFLAGS
> > -#define H_PAGE_F_GIX_SHIFT 56
> > -#define H_PAGE_BUSY _RPAGE_RSV1 /* software: PTE & hash are busy */
> > -#define H_PAGE_F_SECOND _RPAGE_RSV2 /* HPTE is in 2ndary HPTEG */
> > -#define H_PAGE_F_GIX (_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
> > -#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */
> > +
> > +#define INIT_HIDX (~0x0UL)
> >
> > #ifdef CONFIG_PPC_64K_PAGES
> > #include <asm/book3s/64/hash-64k.h>
> > @@ -160,6 +157,14 @@ static inline int hash__pte_none(pte_t pte)
> > return (pte_val(pte) & ~H_PTE_NONE_MASK) == 0;
> > }
> >
> > +static inline bool hpte_soft_invalid(unsigned long slot)
> > +{
> > + return ((slot & 0xfUL) == 0xfUL);
> > +}
> > +
> > +unsigned long get_hidx_gslot(unsigned long vpn, unsigned long shift,
> > + int ssize, real_pte_t rpte, unsigned int subpg_index);
> > +
> > /* This low level function performs the actual PTE insertion
> > * Setting the PTE depends on the MMU type and other factors. It's
> > * an horrible mess that I'm not going to try to clean up now but
> > diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
> > index 6981a52..cfb8169 100644
> > --- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
> > +++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
> > @@ -435,6 +435,11 @@ extern int __hash_page_4K(unsigned long ea, unsigned long access,
> > extern int __hash_page_64K(unsigned long ea, unsigned long access,
> > unsigned long vsid, pte_t *ptep, unsigned long trap,
> > unsigned long flags, int ssize);
> > +extern unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
> > + unsigned int subpg_index, unsigned long slot);
> > +extern unsigned long get_hidx_slot(unsigned long vpn, unsigned long shift,
> > + int ssize, real_pte_t rpte, unsigned int subpg_index);
> > +
> > struct mm_struct;
> > unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap);
> > extern int hash_page_mm(struct mm_struct *mm, unsigned long ea,
> > diff --git a/arch/powerpc/mm/dump_linuxpagetables.c b/arch/powerpc/mm/dump_linuxpagetables.c
> > index 44fe483..b832ed3 100644
> > --- a/arch/powerpc/mm/dump_linuxpagetables.c
> > +++ b/arch/powerpc/mm/dump_linuxpagetables.c
> > @@ -213,7 +213,7 @@ struct flag_info {
> > .val = H_PAGE_4K_PFN,
> > .set = "4K_pfn",
> > }, {
> > -#endif
> > +#else
> > .mask = H_PAGE_F_GIX,
> > .val = H_PAGE_F_GIX,
> > .set = "f_gix",
> > @@ -224,6 +224,7 @@ struct flag_info {
> > .val = H_PAGE_F_SECOND,
> > .set = "f_second",
> > }, {
> > +#endif /* CONFIG_PPC_64K_PAGES */
> > #endif
> > .mask = _PAGE_SPECIAL,
> > .val = _PAGE_SPECIAL,
> > diff --git a/arch/powerpc/mm/hash64_4k.c b/arch/powerpc/mm/hash64_4k.c
> > index 6fa450c..c673829 100644
> > --- a/arch/powerpc/mm/hash64_4k.c
> > +++ b/arch/powerpc/mm/hash64_4k.c
> > @@ -20,6 +20,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > pte_t *ptep, unsigned long trap, unsigned long flags,
> > int ssize, int subpg_prot)
> > {
> > + real_pte_t rpte;
> > unsigned long hpte_group;
> > unsigned long rflags, pa;
> > unsigned long old_pte, new_pte;
> > @@ -54,6 +55,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > * need to add in 0x1 if it's a read-only user page
> > */
> > rflags = htab_convert_pte_flags(new_pte);
> > + rpte = __real_pte(__pte(old_pte), ptep);
> >
> > if (cpu_has_feature(CPU_FTR_NOEXECUTE) &&
> > !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
> > @@ -64,13 +66,10 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > /*
> > * There MIGHT be an HPTE for this pte
> > */
> > - hash = hpt_hash(vpn, shift, ssize);
> > - if (old_pte & H_PAGE_F_SECOND)
> > - hash = ~hash;
> > - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> > - slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
> > + unsigned long gslot = get_hidx_gslot(vpn, shift,
> > + ssize, rpte, 0);
> >
> > - if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_4K,
> > + if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, MMU_PAGE_4K,
> > MMU_PAGE_4K, ssize, flags) == -1)
> > old_pte &= ~_PAGE_HPTEFLAGS;
> > }
> > @@ -118,8 +117,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > return -1;
> > }
> > new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
> > - new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
> > - (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> > + new_pte |= set_hidx_slot(ptep, rpte, 0, slot);
> > }
> > *ptep = __pte(new_pte & ~H_PAGE_BUSY);
> > return 0;
>
>
>
> None of the above changes are needed. We are not changing anything w.r.t
> 4k linux page table yet. So we can drop this.
>
I have put these changes in a separate patch. If needed it can be pulled
in. But its not mandatory. Would be nice to have though, since it
reduces a bunch of lines.
>
> > diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
> > index 1a68cb1..3702a3c 100644
> > --- a/arch/powerpc/mm/hash64_64k.c
> > +++ b/arch/powerpc/mm/hash64_64k.c
> > @@ -15,34 +15,13 @@
> > #include <linux/mm.h>
> > #include <asm/machdep.h>
> > #include <asm/mmu.h>
> > +
> > /*
> > * index from 0 - 15
> > */
> > bool __rpte_sub_valid(real_pte_t rpte, unsigned long index)
> > {
> > - unsigned long g_idx;
> > - unsigned long ptev = pte_val(rpte.pte);
> > -
> > - g_idx = (ptev & H_PAGE_COMBO_VALID) >> H_PAGE_F_GIX_SHIFT;
> > - index = index >> 2;
> > - if (g_idx & (0x1 << index))
> > - return true;
> > - else
> > - return false;
> > -}
> > -/*
> > - * index from 0 - 15
> > - */
> > -static unsigned long mark_subptegroup_valid(unsigned long ptev, unsigned long index)
> > -{
> > - unsigned long g_idx;
> > -
> > - if (!(ptev & H_PAGE_COMBO))
> > - return ptev;
> > - index = index >> 2;
> > - g_idx = 0x1 << index;
> > -
> > - return ptev | (g_idx << H_PAGE_F_GIX_SHIFT);
> > + return !(hpte_soft_invalid(rpte.hidx >> (index << 2)));
> > }
> >
> > int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > @@ -50,10 +29,9 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > int ssize, int subpg_prot)
> > {
> > real_pte_t rpte;
> > - unsigned long *hidxp;
> > unsigned long hpte_group;
> > unsigned int subpg_index;
> > - unsigned long rflags, pa, hidx;
> > + unsigned long rflags, pa;
> > unsigned long old_pte, new_pte, subpg_pte;
> > unsigned long vpn, hash, slot;
> > unsigned long shift = mmu_psize_defs[MMU_PAGE_4K].shift;
> > @@ -116,28 +94,23 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > * On hash insert failure we use old pte value and we don't
> > * want slot information there if we have a insert failure.
> > */
> > - old_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
> > - new_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
> > + old_pte &= ~(H_PAGE_HASHPTE);
> > + new_pte &= ~(H_PAGE_HASHPTE);
> > goto htab_insert_hpte;
> > }
> > /*
> > * Check for sub page valid and update
> > */
> > if (__rpte_sub_valid(rpte, subpg_index)) {
> > - int ret;
> >
> > - hash = hpt_hash(vpn, shift, ssize);
> > - hidx = __rpte_to_hidx(rpte, subpg_index);
> > - if (hidx & _PTEIDX_SECONDARY)
> > - hash = ~hash;
> > - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> > - slot += hidx & _PTEIDX_GROUP_IX;
> > + unsigned long gslot = get_hidx_gslot(vpn, shift,
> > + ssize, rpte, subpg_index);
>
>
> Converting that to helper is also not needed in this patch. Leave it as
> it is. It is much easier to review.
>
ok. But dont want to reduce a bunch of lines?
>
> >
> > - ret = mmu_hash_ops.hpte_updatepp(slot, rflags, vpn,
> > + int ret = mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn,
> > MMU_PAGE_4K, MMU_PAGE_4K,
> > ssize, flags);
> > /*
> > - *if we failed because typically the HPTE wasn't really here
> > + * if we failed because typically the HPTE wasn't really here
> > * we try an insertion.
> > */
> > if (ret == -1)
> > @@ -148,6 +121,15 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > }
> >
> > htab_insert_hpte:
> > +
> > + /*
> > + * initialize all hidx entries to a invalid value,
> > + * the first time the PTE is about to allocate
> > + * a 4K hpte
> > + */
> > + if (!(old_pte & H_PAGE_COMBO))
> > + rpte.hidx = INIT_HIDX;
> > +
> > /*
> > * handle H_PAGE_4K_PFN case
> > */
> > @@ -177,10 +159,20 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > rflags, HPTE_V_SECONDARY,
> > MMU_PAGE_4K, MMU_PAGE_4K,
> > ssize);
> > - if (slot == -1) {
> > - if (mftb() & 0x1)
> > +
> > + if (unlikely(hpte_soft_invalid(slot))) {
>
> Should we name that hpte_slot_invalid() ? ie. s/soft/slot/ ?
I intentionally used the word soft, since for the hardware it is a
valid slot. The *soft*ware is considering it invalid. Hence the word
*soft*.
>
>
> > + slot = slot & _PTEIDX_GROUP_IX;
> > + mmu_hash_ops.hpte_invalidate(hpte_group+slot, vpn,
> > + MMU_PAGE_4K, MMU_PAGE_4K,
> > + ssize, flags);
>
> What is the last arg flags here ? I guess we need to pass 0 there ?
> We can't do a local = 1 invalidate, because we don't know whether
> anybody did really access this address in between and has got the entry
> in TLB.
ok. I think you are right. it should be 0.
>
>
> > + }
> > +
> > + if (unlikely(slot == -1 || hpte_soft_invalid(slot))) {
> > +
>
> Can you add a comment around explaining invalid slot always result in
> removing from primary ? Also do we want to store that invalid slot
> details in a variable ? instead of doing that conditional again and
> again ? This is hotpath.
>
will do.
> > + if (hpte_soft_invalid(slot) || (mftb() & 0x1))
> > hpte_group = ((hash & htab_hash_mask) *
> > HPTES_PER_GROUP) & ~0x7UL;
> > +
> > mmu_hash_ops.hpte_remove(hpte_group);
> > /*
> > * FIXME!! Should be try the group from which we removed ?
> > @@ -204,11 +196,9 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> > * Since we have H_PAGE_BUSY set on ptep, we can be sure
> > * nobody is undating hidx.
> > */
> > - hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
> > - rpte.hidx &= ~(0xfUL << (subpg_index << 2));
> > - *hidxp = rpte.hidx | (slot << (subpg_index << 2));
> > - new_pte = mark_subptegroup_valid(new_pte, subpg_index);
> > - new_pte |= H_PAGE_HASHPTE;
> > + new_pte |= set_hidx_slot(ptep, rpte, subpg_index, slot);
> > + new_pte |= H_PAGE_HASHPTE;
> > +
> > /*
> > * check __real_pte for details on matching smp_rmb()
> > */
> > @@ -322,9 +312,10 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
> > MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
> > return -1;
> > }
> > - new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
> > +
> > new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
> > - (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> > + (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> > + new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
>
> What is this change ? i guess we want this in second patch ?
yes. have moved it to the second patch.
>
>
> > }
> > *ptep = __pte(new_pte & ~H_PAGE_BUSY);
> > return 0;
> > diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
> > index f2095ce..c0f4b46 100644
> > --- a/arch/powerpc/mm/hash_utils_64.c
> > +++ b/arch/powerpc/mm/hash_utils_64.c
> > @@ -975,8 +975,9 @@ void __init hash__early_init_devtree(void)
> >
> > void __init hash__early_init_mmu(void)
> > {
> > +#ifndef CONFIG_PPC_64K_PAGES
> > /*
> > - * We have code in __hash_page_64K() and elsewhere, which assumes it can
> > + * We have code in __hash_page_4K() and elsewhere, which assumes it can
> > * do the following:
> > * new_pte |= (slot << H_PAGE_F_GIX_SHIFT) & (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> > *
> > @@ -987,6 +988,7 @@ void __init hash__early_init_mmu(void)
> > * with a BUILD_BUG_ON().
> > */
> > BUILD_BUG_ON(H_PAGE_F_SECOND != (1ul << (H_PAGE_F_GIX_SHIFT + 3)));
> > +#endif /* CONFIG_PPC_64K_PAGES */
> >
> > htab_init_page_sizes();
> >
> > @@ -1589,29 +1591,39 @@ static inline void tm_flush_hash_page(int local)
> > }
> > #endif
> >
> > +unsigned long get_hidx_gslot(unsigned long vpn, unsigned long shift,
> > + int ssize, real_pte_t rpte, unsigned int subpg_index)
> > +{
> > + unsigned long hash, slot, hidx;
> > +
> > + hash = hpt_hash(vpn, shift, ssize);
> > + hidx = __rpte_to_hidx(rpte, subpg_index);
> > + if (hidx & _PTEIDX_SECONDARY)
> > + hash = ~hash;
> > + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> > + slot += hidx & _PTEIDX_GROUP_IX;
> > + return slot;
> > +}
>
>
> We don't need this helper for this patch series ?
>
the helpers will now be moved into independent patches. Can be applied
if needed.
> > +
> > +
> > /* WARNING: This is called from hash_low_64.S, if you change this prototype,
> > * do not forget to update the assembly call site !
> > */
> > void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, int ssize,
> > unsigned long flags)
> > {
> > - unsigned long hash, index, shift, hidx, slot;
> > + unsigned long hash, index, shift, hidx, gslot;
> > int local = flags & HPTE_LOCAL_UPDATE;
> >
> > DBG_LOW("flush_hash_page(vpn=%016lx)\n", vpn);
> > pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) {
> > - hash = hpt_hash(vpn, shift, ssize);
> > - hidx = __rpte_to_hidx(pte, index);
> > - if (hidx & _PTEIDX_SECONDARY)
> > - hash = ~hash;
> > - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> > - slot += hidx & _PTEIDX_GROUP_IX;
> > + gslot = get_hidx_gslot(vpn, shift, ssize, pte, index);
> > DBG_LOW(" sub %ld: hash=%lx, hidx=%lx\n", index, slot, hidx);
> > /*
> > * We use same base page size and actual psize, because we don't
> > * use these functions for hugepage
> > */
> > - mmu_hash_ops.hpte_invalidate(slot, vpn, psize, psize,
> > + mmu_hash_ops.hpte_invalidate(gslot, vpn, psize, psize,
> > ssize, local);
> > } pte_iterate_hashed_end();
> >
> And if we avoid adding that helper, changes like this can be avoided in
> the patch.
>
>
> -aneesh
More information about the Linuxppc-dev
mailing list