[PATCH v2] perf: libdw support for powerpc

Paolo Bonzini pbonzini at redhat.com
Thu Jun 1 20:24:41 AEST 2017


Porting PPC to libdw only needs an architecture-specific hook to move
the register state from perf to libdw.

The ARM and x86 architectures already use libdw, and it is useful to
have as much common code for the unwinder as possible.  Mark Wielaard
has contributed a frame-based unwinder to libdw, so that unwinding works
even for binaries that do not have CFI information.  In addition,
libunwind is always preferred to libdw by the build machinery so this
cannot introduce regressions on machines that have both libunwind and
libdw installed.

Cc: acme at kernel.org
Cc: Naveen N. Rao <naveen.n.rao at linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria at linux.vnet.ibm.com>
Cc: linuxppc-dev at lists.ozlabs.org
Signed-off-by: Paolo Bonzini <pbonzini at redhat.com>
---
	v1->v2: fix for 4.11->4.12 changes

 tools/perf/Makefile.config                  |  2 +-
 tools/perf/arch/powerpc/util/Build          |  2 +
 tools/perf/arch/powerpc/util/unwind-libdw.c | 73 +++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+), 1 deletion(-)
 create mode 100644 tools/perf/arch/powerpc/util/unwind-libdw.c

diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 8354d04b392f..e7b04a729417 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -61,7 +61,7 @@ endif
 # Disable it on all other architectures in case libdw unwind
 # support is detected in system. Add supported architectures
 # to the check.
-ifneq ($(ARCH),$(filter $(ARCH),x86 arm))
+ifneq ($(ARCH),$(filter $(ARCH),x86 arm powerpc))
   NO_LIBDW_DWARF_UNWIND := 1
 endif
 
diff --git a/tools/perf/arch/powerpc/util/Build b/tools/perf/arch/powerpc/util/Build
index 90ad64b231cd..2e6595310420 100644
--- a/tools/perf/arch/powerpc/util/Build
+++ b/tools/perf/arch/powerpc/util/Build
@@ -5,4 +5,6 @@ libperf-y += perf_regs.o
 
 libperf-$(CONFIG_DWARF) += dwarf-regs.o
 libperf-$(CONFIG_DWARF) += skip-callchain-idx.o
+
 libperf-$(CONFIG_LIBUNWIND) += unwind-libunwind.o
+libperf-$(CONFIG_LIBDW_DWARF_UNWIND) += unwind-libdw.o
diff --git a/tools/perf/arch/powerpc/util/unwind-libdw.c b/tools/perf/arch/powerpc/util/unwind-libdw.c
new file mode 100644
index 000000000000..3a24b3c43273
--- /dev/null
+++ b/tools/perf/arch/powerpc/util/unwind-libdw.c
@@ -0,0 +1,73 @@
+#include <elfutils/libdwfl.h>
+#include "../../util/unwind-libdw.h"
+#include "../../util/perf_regs.h"
+#include "../../util/event.h"
+
+/* See backends/ppc_initreg.c and backends/ppc_regs.c in elfutils.  */
+static const int special_regs[3][2] = {
+	{ 65, PERF_REG_POWERPC_LINK },
+	{ 101, PERF_REG_POWERPC_XER },
+	{ 109, PERF_REG_POWERPC_CTR },
+};
+
+bool libdw__arch_set_initial_registers(Dwfl_Thread *thread, void *arg)
+{
+	struct unwind_info *ui = arg;
+	struct regs_dump *user_regs = &ui->sample->user_regs;
+	Dwarf_Word dwarf_regs[32], dwarf_nip;
+	size_t i;
+
+#define REG(r) ({						\
+	Dwarf_Word val = 0;					\
+	perf_reg_value(&val, user_regs, PERF_REG_POWERPC_##r);	\
+	val;							\
+})
+
+	dwarf_regs[0]  = REG(R0);
+	dwarf_regs[1]  = REG(R1);
+	dwarf_regs[2]  = REG(R2);
+	dwarf_regs[3]  = REG(R3);
+	dwarf_regs[4]  = REG(R4);
+	dwarf_regs[5]  = REG(R5);
+	dwarf_regs[6]  = REG(R6);
+	dwarf_regs[7]  = REG(R7);
+	dwarf_regs[8]  = REG(R8);
+	dwarf_regs[9]  = REG(R9);
+	dwarf_regs[10] = REG(R10);
+	dwarf_regs[11] = REG(R11);
+	dwarf_regs[12] = REG(R12);
+	dwarf_regs[13] = REG(R13);
+	dwarf_regs[14] = REG(R14);
+	dwarf_regs[15] = REG(R15);
+	dwarf_regs[16] = REG(R16);
+	dwarf_regs[17] = REG(R17);
+	dwarf_regs[18] = REG(R18);
+	dwarf_regs[19] = REG(R19);
+	dwarf_regs[20] = REG(R20);
+	dwarf_regs[21] = REG(R21);
+	dwarf_regs[22] = REG(R22);
+	dwarf_regs[23] = REG(R23);
+	dwarf_regs[24] = REG(R24);
+	dwarf_regs[25] = REG(R25);
+	dwarf_regs[26] = REG(R26);
+	dwarf_regs[27] = REG(R27);
+	dwarf_regs[28] = REG(R28);
+	dwarf_regs[29] = REG(R29);
+	dwarf_regs[30] = REG(R30);
+	dwarf_regs[31] = REG(R31);
+	if (!dwfl_thread_state_registers(thread, 0, 32, dwarf_regs))
+		return false;
+
+	dwarf_nip = REG(NIP);
+	dwfl_thread_state_register_pc(thread, dwarf_nip);
+	for (i = 0; i < ARRAY_SIZE(special_regs); i++) {
+		Dwarf_Word val = 0;
+		perf_reg_value(&val, user_regs, special_regs[i][1]);
+		if (!dwfl_thread_state_registers(thread,
+						 special_regs[i][0], 1,
+						 &val))
+			return false;
+	}
+
+	return true;
+}
-- 
1.8.3.1



More information about the Linuxppc-dev mailing list