RCU lockup issues when CONFIG_SOFTLOCKUP_DETECTOR=n - any one else seeing this?

[Jonathan Cameron]

On Fri, 28 Jul 2017 09:55:29 -0700
"Paul E. McKenney" <paulmck at linux.vnet.ibm.com> wrote:

> On Fri, Jul 28, 2017 at 02:24:03PM +0100, Jonathan Cameron wrote:
> > On Fri, 28 Jul 2017 08:44:11 +0100
> > Jonathan Cameron <Jonathan.Cameron at huawei.com> wrote:  
> 
> [ . . . ]
> 
> > Ok.  Some info.  I disabled a few driver (usb and SAS) in the interest of having
> > fewer timer events.  Issue became much easier to trigger (on some runs before
> > I could get tracing up and running)
> >e
> > So logs are large enough that pastebin doesn't like them - please shoet if  
> >>e another timer period is of interest.  
> > 
> > https://pastebin.com/iUZDfQGM for the timer trace.
> > https://pastebin.com/3w1F7amH for dmesg.  
> > 
> > The relevant timeout on the RCU stall detector was 8 seconds.  Event is
> > detected around 835.
> > 
> > It's a lot of logs, so I haven't identified a smoking gun yet but there
> > may well be one in there.  
> 
> The dmesg says:
> 
> rcu_preempt kthread starved for 2508 jiffies! g112 c111 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1
> 
> So I look for "rcu_preempt" timer events and find these:
> 
> rcu_preempt-9     [019] ....   827.579114: timer_init: timer=ffff8017d5fc7da0
> rcu_preempt-9     [019] d..1   827.579115: timer_start: timer=ffff8017d5fc7da0 function=process_timeout 
> 
> Next look for "ffff8017d5fc7da0" and I don't find anything else.
It does show up off the bottom of what would fit in pastebin...

     rcu_preempt-9     [001] d..1   837.681077: timer_cancel: timer=ffff8017d5fc7da0
     rcu_preempt-9     [001] ....   837.681086: timer_init: timer=ffff8017d5fc7da0
     rcu_preempt-9     [001] d..1   837.681087: timer_start: timer=ffff8017d5fc7da0 function=process_timeout expires=4295101298 [timeout=1] cpu=1 idx=0 flags=

> The timeout was one jiffy, and more than a second later, no expiration.
> Is it possible that this event was lost?  I am not seeing any sign of
> this is the trace.
> 
> I don't see any sign of CPU hotplug (and I test with lots of that in
> any case).
> 
> The last time we saw something like this it was a timer HW/driver problem,
> but it is a bit hard to imagine such a problem affecting both ARM64
> and SPARC.  ;-)
Could be different issues, both of which were hidden by that lockup detector.

There is an errata work around for the timers on this particular board.
I'm only vaguely aware of it, so may be unconnected.

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/clocksource/arm_arch_timer.c?h=v4.13-rc2&id=bb42ca47401010fc02901b5e8f79e40a26f208cb

Seems unlikely though! + we've not yet seen it on the other chips that
errata effects (not that that means much).

Jonathan

> 
> Thomas, any debugging suggestions?
> 
> 							Thanx, Paul
>