[RFC v6 13/62] powerpc: track allocation status of all pkeys

[Thiago Jung Bauermann]

Hello Ram,

I'm still going through the patches and haven't formed a full picture of
the feature in my mind yet, so my comments today won't be particularly
insightful...

But hopefully the comments that I currently have will be helpful anyway.

Ram Pai <linuxram at us.ibm.com> writes:
> diff --git a/arch/powerpc/include/asm/pkeys.h b/arch/powerpc/include/asm/pkeys.h
> index 203d7de..09b268e 100644
> --- a/arch/powerpc/include/asm/pkeys.h
> +++ b/arch/powerpc/include/asm/pkeys.h
> @@ -2,21 +2,87 @@
>  #define _ASM_PPC64_PKEYS_H
>
>  extern bool pkey_inited;
> -#define ARCH_VM_PKEY_FLAGS 0
> +#define arch_max_pkey()  32
> +#define ARCH_VM_PKEY_FLAGS (VM_PKEY_BIT0 | VM_PKEY_BIT1 | VM_PKEY_BIT2 | \
> +				VM_PKEY_BIT3 | VM_PKEY_BIT4)
> +/*
> + * Bits are in BE format.
> + * NOTE: key 31, 1, 0 are not used.
> + * key 0 is used by default. It give read/write/execute permission.
> + * key 31 is reserved by the hypervisor.
> + * key 1 is recommended to be not used.
> + * PowerISA(3.0) page 1015, programming note.
> + */
> +#define PKEY_INITIAL_ALLOCAION  0xc0000001

There's a typo in the macro name, should be "ALLOCATION".

-- 
Thiago Jung Bauermann
IBM Linux Technology Center