RCU lockup issues when CONFIG_SOFTLOCKUP_DETECTOR=n - any one else seeing this?

[Paul E. McKenney]

On Tue, Jul 25, 2017 at 10:42:45PM +0800, Jonathan Cameron wrote:
> On Tue, 25 Jul 2017 06:46:26 -0700
> "Paul E. McKenney" <paulmck at linux.vnet.ibm.com> wrote:
> 
> > On Tue, Jul 25, 2017 at 10:26:54PM +1000, Nicholas Piggin wrote:
> > > On Tue, 25 Jul 2017 19:32:10 +0800
> > > Jonathan Cameron <Jonathan.Cameron at huawei.com> wrote:
> > >   
> > > > Hi All,
> > > > 
> > > > We observed a regression on our d05 boards (but curiously not
> > > > the fairly similar but single socket / smaller core count
> > > > d03), initially seen with linux-next prior to the merge window
> > > > and still present in v4.13-rc2.
> > > > 
> > > > The symptom is:  
> > 
> > Adding Dave Miller and the sparclinux at vger.kernel.org email on CC, as
> > they have been seeing something similar, and you might well have saved
> > them the trouble of bisecting.
> > 
> > [ . . . ]
> > 
> > > > [ 1984.628602] rcu_preempt kthread starved for 5663 jiffies! g1566 c1565 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1  
> > 
> > This is the cause from an RCU perspective.  You had a lot of idle CPUs,
> > and RCU is not permitted to disturb them -- the battery-powered embedded
> > guys get very annoyed by that sort of thing.  What happens instead is
> > that each CPU updates a per-CPU state variable when entering or exiting
> > idle, and the grace-period kthread ("rcu_preempt kthread" in the above
> > message) checks these state variables, and if when sees an idle CPU,
> > it reports a quiescent state on that CPU's behalf.
> > 
> > But the grace-period kthread can only do this work if it gets a chance
> > to run.  And the message above says that this kthread hasn't had a chance
> > to run for a full 5,663 jiffies.  For completeness, the "g1566 c1565"
> > says that grace period #1566 is in progress, the "f0x0" says that no one
> > is needing another grace period #1567.  The "RCU_GP_WAIT_FQS(3)" says
> > that the grace-period kthread has fully initialized the current grace
> > period and is sleeping for a few jiffies waiting to scan for idle tasks.
> > Finally, the "->state=0x1" says that the grace-period kthread is in
> > TASK_INTERRUPTIBLE state, in other words, still sleeping.
> 
> Thanks for the explanation!
> > 
> > So my first question is "What did commit 05a4a9527 (kernel/watchdog:
> > split up config options) do to prevent the grace-period kthread from
> > getting a chance to run?" 
> 
> As far as we can tell it was a side effect of that patch.
> 
> The real cause is that patch changed the result of defconfigs to stop running
> the softlockup detector - now CONFIG_SOFTLOCKUP_DETECTOR
> 
> Enabling that on 4.13-rc2 (and presumably everything in between)
> means we don't see the problem any more.
> 
> > I must confess that I don't see anything
> > obvious in that commit, so my second question is "Are we sure that
> > reverting this commit makes the problem go away?"
> 
> Simply enabling CONFIG_SOFTLOCKUP_DETECTOR seems to make it go away.
> That detector fires up a thread on every cpu, which may be relevant.

Interesting...  Why should it be necessary to fire up a thread on every
CPU in order to make sure that RCU's grace-period kthreads get some
CPU time?  Especially give how many idle CPUs you had on your system.

So I have to ask if there is some other bug that the softlockup detector
is masking.

> > and my third is "Is
> > this an intermittent problem that led to a false bisection?"
> 
> Whilst it is a bit slow to occur, we verified with long runs on either
> side of that patch and since with the option enabled on latest mainline.
> 
> Also can cause the issue before that patch by disabling the previous
> relevant option on 4.12.

OK, thank you -- hard to argue with that!  ;-)

Except that I am still puzzled as to why per-CPU softlockup threads
are needed for RCU's kthreads to get their wakeups.  We really should
be able to disable softlockup and still have kthreads get wakeups and
access to CPU, after all.

> > [ . . . ]
> > 
> > > > Reducing the RCU CPU stall timeout makes it happen more often,
> > > > but we are seeing even with the default value of 24 seconds.
> > > > 
> > > > Tends to occur after a period or relatively low usage, but has
> > > > also been seen mid way through performance tests.
> > > > 
> > > > This was not seen with v4.12 so a bisection run later lead to
> > > > commit 05a4a9527 (kernel/watchdog: split up config options).
> > > > 
> > > > Which was odd until we discovered that a side effect of this patch
> > > > was to change whether the softlockup detector was enabled or not in
> > > > the arm64 defconfig.
> > > > 
> > > > On 4.13-rc2 enabling the softlockup detector indeed stopped us
> > > > seeing the rcu issue. Disabling the equivalent on 4.12 made the
> > > > issue occur there as well.
> > > > 
> > > > Clearly the softlockup detector results in a thread on every cpu,
> > > > which might be related but beyond that we are still looking into
> > > > the issue.
> > > > 
> > > > So the obvious question is whether anyone else is seeing this as
> > > > it might help us to focus in on where to look!  
> > > 
> > > Huh. Something similar has been seen very intermittently on powerpc
> > > as well. We couldn't reproduce it reliably to bisect it already, so
> > > this is a good help.
> > > 
> > > http://marc.info/?l=linuxppc-embedded&m=149872815523646&w=2
> > > 
> > > It looks like the watchdog patch has a similar effect on powerpc in
> > > that it stops enabling the softlockup detector by default. Haven't
> > > confirmed, but it looks like the same thing.
> > > 
> > > A bug in RCU stall detection?  
> > 
> > Well, if I am expected to make grace periods complete when my grace-period
> > kthreads aren't getting any CPU time, I will have to make some substantial
> > changes.  ;-)
> > 
> > One possibility is that the timer isn't firing and another is that the
> > timer's wakeup is being lost somehow.
> > 
> > So another thing to try is to boot with rcutree.rcu_kick_kthreads=1.
> > This will cause RCU to do redundant wakeups on the grace-period kthread
> > if the grace period is moving slowly.  This is of course a crude hack,
> > which is why this boot parameter will also cause a splat if it ever has
> > to do anything.
> 
> Running that now will let you know how it goes.  Not seen the issue yet
> but might just be a 'lucky' run - will give it a few hours.

Thank you very much!

							Thanx, Paul

> Jonathan
> > 
> > Does this help at all?
> > 
> > 							Thanx, Paul
> > 
> > > > In the meantime we'll carry on digging.
> > > > 
> > > > Thanks,
> > > > 
> > > > Jonathan
> > > > 
> > > > p.s. As a more general question, do we want to have the
> > > > soft lockup detector enabledon arm64 by default?  
> > > 
> > > I've cc'ed Don. My patch should not have changed defconfigs, I
> > > should have been more careful with that.
> > > 
> > > Thanks,
> > > Nick
> > >   
> > 
> 
>