[PATCH V7 0/3] powernv : Add support for OPAL-OCC command/response interface

Shilpasri G Bhat shilpa.bhat at linux.vnet.ibm.com
Thu Jul 20 04:39:53 AEST 2017


In P9, OCC (On-Chip-Controller) supports shared memory based
commad-response interface. Within the shared memory there is an OPAL
command buffer and OCC response buffer that can be used to send
inband commands to OCC. The following commands are supported:

1) Set system powercap
2) Set CPU-GPU power shifting ratio
3) Clear min/max for OCC sensor groups

The skiboot patch for this interface is posted here:
https://lists.ozlabs.org/pipermail/skiboot/2017-July/008293.html

Shilpasri G Bhat (3):
  powernv: powercap: Add support for powercap framework
  powernv: Add support to set power-shifting-ratio
  powernv : Add support to clear sensor groups data

 arch/powerpc/include/asm/opal-api.h            |   8 +-
 arch/powerpc/include/asm/opal.h                |   8 +
 arch/powerpc/include/uapi/asm/opal-occ.h       |  23 +++
 arch/powerpc/platforms/powernv/Makefile        |   2 +-
 arch/powerpc/platforms/powernv/opal-occ.c      | 108 +++++++++++
 arch/powerpc/platforms/powernv/opal-powercap.c | 237 +++++++++++++++++++++++++
 arch/powerpc/platforms/powernv/opal-psr.c      | 169 ++++++++++++++++++
 arch/powerpc/platforms/powernv/opal-wrappers.S |   5 +
 arch/powerpc/platforms/powernv/opal.c          |  10 ++
 9 files changed, 568 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/include/uapi/asm/opal-occ.h
 create mode 100644 arch/powerpc/platforms/powernv/opal-occ.c
 create mode 100644 arch/powerpc/platforms/powernv/opal-powercap.c
 create mode 100644 arch/powerpc/platforms/powernv/opal-psr.c

-- 
1.8.3.1



More information about the Linuxppc-dev mailing list