[PATCH V2 6/6] crypto/nx: Add P9 NX support for 842 compression engine
Ram Pai
linuxram at us.ibm.com
Tue Jul 18 16:53:18 AEST 2017
On Mon, Jul 17, 2017 at 04:50:38PM -0700, Haren Myneni wrote:
>
> This patch adds P9 NX support for 842 compression engine. Virtual
> Accelerator Switchboard (VAS) is used to access 842 engine on P9.
>
> For each NX engine per chip, setup receive window using
> vas_rx_win_open() which configures RxFIFo with FIFO address, lpid,
> pid and tid values. This unique (lpid, pid, tid) combination will
> be used to identify the target engine.
>
> For crypto open request, open send window on the NX engine for
> the corresponding chip / cpu where the open request is executed.
> This send window will be closed upon crypto close request.
>
> NX provides high and normal priority FIFOs. For compression /
> decompression requests, we use only hight priority FIFOs in kernel.
>
> Each NX request will be communicated to VAS using copy/paste
> instructions with vas_copy_crb() / vas_paste_crb() functions.
>
> Signed-off-by: Haren Myneni <haren at us.ibm.com>
> ---
> drivers/crypto/nx/Kconfig | 1 +
> drivers/crypto/nx/nx-842-powernv.c | 369 ++++++++++++++++++++++++++++++++++++-
> drivers/crypto/nx/nx-842.c | 2 +-
> 3 files changed, 365 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/crypto/nx/Kconfig b/drivers/crypto/nx/Kconfig
> index ad7552a6998c..cd5dda9c48f4 100644
> --- a/drivers/crypto/nx/Kconfig
> +++ b/drivers/crypto/nx/Kconfig
> @@ -38,6 +38,7 @@ config CRYPTO_DEV_NX_COMPRESS_PSERIES
> config CRYPTO_DEV_NX_COMPRESS_POWERNV
> tristate "Compression acceleration support on PowerNV platform"
> depends on PPC_POWERNV
> + depends on PPC_VAS
> default y
> help
> Support for PowerPC Nest (NX) compression acceleration. This
> diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c
> index c0dd4c7e17d3..8d9d21420144 100644
> --- a/drivers/crypto/nx/nx-842-powernv.c
> +++ b/drivers/crypto/nx/nx-842-powernv.c
> @@ -23,6 +23,7 @@
> #include <asm/prom.h>
> #include <asm/icswx.h>
> #include <asm/vas.h>
> +#include <asm/reg.h>
>
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Dan Streetman <ddstreet at ieee.org>");
> @@ -32,6 +33,9 @@ MODULE_ALIAS_CRYPTO("842-nx");
>
> #define WORKMEM_ALIGN (CRB_ALIGN)
> #define CSB_WAIT_MAX (5000) /* ms */
> +#define VAS_RETRIES (10)
> +/* # of requests allowed per RxFIFO at a time. 0 for unlimited */
> +#define MAX_CREDITS_PER_RXFIFO (64)
>
> struct nx842_workmem {
> /* Below fields must be properly aligned */
> @@ -42,16 +46,27 @@ struct nx842_workmem {
>
> ktime_t start;
>
> + struct vas_window *txwin; /* Used with VAS function */
> char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
> } __packed __aligned(WORKMEM_ALIGN);
>
> struct nx842_coproc {
> unsigned int chip_id;
> unsigned int ct;
> - unsigned int ci;
> + unsigned int ci; /* Coprocessor instance, used with icswx */
> + struct {
> + struct vas_window *rxwin;
> + int id;
> + } vas;
ci and vas are mutually exclusive. a few bytes could be saved by unionizing them?
> struct list_head list;
> };
>
> +/*
> + * Send the request to NX engine on the chip for the corresponding CPU
> + * where the process is executing. Use with VAS function.
> + */
> +static DEFINE_PER_CPU(struct nx842_coproc *, coproc_inst);
> +
> /* no cpu hotplug on powernv, so this list never changes after init */
> static LIST_HEAD(nx842_coprocs);
> static unsigned int nx842_ct; /* used in icswx function */
> @@ -513,6 +528,108 @@ static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen,
> }
>
> /**
> + * nx842_exec_vas - compress/decompress data using the 842 algorithm
> + *
> + * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
> + * This compresses or decompresses the provided input buffer into the provided
> + * output buffer.
> + *
> + * Upon return from this function @outlen contains the length of the
> + * output data. If there is an error then @outlen will be 0 and an
> + * error will be specified by the return code from this function.
> + *
> + * The @workmem buffer should only be used by one function call at a time.
> + *
> + * @in: input buffer pointer
> + * @inlen: input buffer size
> + * @out: output buffer pointer
> + * @outlenp: output buffer size pointer
> + * @workmem: working memory buffer pointer, size determined by
> + * nx842_powernv_driver.workmem_size
> + * @fc: function code, see CCW Function Codes in nx-842.h
> + *
> + * Returns:
> + * 0 Success, output of length @outlenp stored in the buffer
> + * at @out
> + * -ENODEV Hardware unavailable
> + * -ENOSPC Output buffer is to small
> + * -EMSGSIZE Input buffer too large
> + * -EINVAL buffer constraints do not fix nx842_constraints
> + * -EPROTO hardware error during operation
> + * -ETIMEDOUT hardware did not complete operation in reasonable time
> + * -EINTR operation was aborted
> + */
> +static int nx842_exec_vas(const unsigned char *in, unsigned int inlen,
> + unsigned char *out, unsigned int *outlenp,
> + void *workmem, int fc)
> +{
> + struct coprocessor_request_block *crb;
> + struct coprocessor_status_block *csb;
> + struct nx842_workmem *wmem;
> + struct vas_window *txwin;
> + int ret, i = 0;
> + u32 ccw;
> + unsigned int outlen = *outlenp;
> +
> + wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
> +
> + *outlenp = 0;
> +
> + crb = &wmem->crb;
> + csb = &crb->csb;
> +
> + ret = nx842_config_crb(in, inlen, out, outlen, wmem);
> + if (ret)
> + return ret;
> +
> + ccw = 0;
> + ccw = SET_FIELD(CCW_FC_842, ccw, fc);
> + crb->ccw = cpu_to_be32(ccw);
> +
> + txwin = wmem->txwin;
> + /* shoudn't happen, we don't load without a coproc */
> + if (!txwin) {
> + pr_err_ratelimited("NX-842 coprocessor is not available");
> + return -ENODEV;
> + }
> +
> + wmem->start = ktime_get();
> +
> + /*
> + * VAS copy CRB into L2 cache. Refer <asm/vas.h>.
> + * @crb, @offset and @first (must be true)
> + */
> + vas_copy_crb(crb, 0, 1);
> +
> + /*
> + * VAS paste previously copied CRB to NX.
> + * @txwin, @offset, @last (must be true) and @re is expected/assumed
> + * to be true for NX windows.
> + */
> + ret = vas_paste_crb(txwin, 0, 1, 1);
> +
> + /*
> + * Retry copy/paste function for VAS failures.
> + */
> + while (ret && (i++ < VAS_RETRIES)) {
> + vas_copy_crb(crb, 0, 1);
> + wmem->start = ktime_get();
should this is be before vas_copy_crb() ?
> + ret = vas_paste_crb(wmem->txwin, 0, 1, 1);
> + }
> +
> + if (ret) {
> + pr_err_ratelimited("VAS copy/paste failed\n");
> + return ret;
> + }
> +
> + ret = wait_for_csb(wmem, csb);
> + if (!ret)
> + *outlenp = be32_to_cpu(csb->count);
> +
> + return ret;
> +}
> +
> +/**
> * nx842_powernv_compress - Compress data using the 842 algorithm
> *
> * Compression provided by the NX842 coprocessor on IBM PowerNV systems.
> @@ -576,6 +693,191 @@ static inline void nx842_add_coprocs_list(struct nx842_coproc *coproc,
> list_add(&coproc->list, &nx842_coprocs);
> }
>
> +/*
> + * Identify chip ID for each CPU and save coprocesor adddress for the
> + * corresponding NX engine in percpu coproc_inst.
> + * coproc_inst is used in crypto_init to open send window on the NX instance
> + * for the corresponding CPU / chip where the open request is executed.
> + */
> +static void nx842_set_per_cpu_coproc(struct nx842_coproc *coproc)
> +{
> + unsigned int i, chip_id;
> +
> + for_each_possible_cpu(i) {
> + chip_id = cpu_to_chip_id(i);
> +
> + if (coproc->chip_id == chip_id)
> + per_cpu(coproc_inst, i) = coproc;
> + }
> +}
> +
> +
> +static struct vas_window *nx842_alloc_txwin(struct nx842_coproc *coproc)
> +{
> + struct vas_window *txwin = NULL;
> + struct vas_tx_win_attr txattr;
> +
> + /*
> + * Kernel requests will be high priority. So open send
> + * windows only for high priority RxFIFO entries.
> + */
> + vas_init_tx_win_attr(&txattr, coproc->ct);
> + txattr.lpid = 0; /* lpid is 0 for kernel requests */
> + txattr.pid = mfspr(SPRN_PID);
> +
> + /*
> + * Open a VAS send window which is used to send request to NX.
> + */
> + txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr);
> + if (IS_ERR(txwin)) {
> + pr_err("ibm,nx-842: Can not open TX window: %ld\n",
> + PTR_ERR(txwin));
> + return NULL;
> + }
> +
> + return txwin;
> +}
> +
> +static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
> + int vasid)
> +{
> + struct vas_window *rxwin = NULL;
> + struct vas_rx_win_attr rxattr;
> + struct nx842_coproc *coproc;
> + u32 lpid, pid, tid, fifo_size;
> + u64 rx_fifo;
> + const char *priority;
> + int ret;
> +
> + ret = of_property_read_u64(dn, "rx-fifo-address", (void *)&rx_fifo);
> + if (ret) {
> + pr_err("Missing rx-fifo-address property\n");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size);
> + if (ret) {
> + pr_err("Missing rx-fifo-size property\n");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(dn, "lpid", &lpid);
> + if (ret) {
> + pr_err("Missing lpid property\n");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(dn, "pid", &pid);
> + if (ret) {
> + pr_err("Missing pid property\n");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(dn, "tid", &tid);
> + if (ret) {
> + pr_err("Missing tid property\n");
> + return ret;
> + }
> +
> + ret = of_property_read_string(dn, "priority", &priority);
> + if (ret) {
> + pr_err("Missing priority property\n");
> + return ret;
> + }
> +
> + coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
> + if (!coproc)
> + return -ENOMEM;
> +
> + if (!strcmp(priority, "High"))
> + coproc->ct = VAS_COP_TYPE_842_HIPRI;
> + else if (!strcmp(priority, "Normal"))
> + coproc->ct = VAS_COP_TYPE_842;
> + else {
> + pr_err("Invalid RxFIFO priority value\n");
> + ret = -EINVAL;
> + goto err_out;
> + }
> +
> + vas_init_rx_win_attr(&rxattr, coproc->ct);
> + rxattr.rx_fifo = (void *)rx_fifo;
> + rxattr.rx_fifo_size = fifo_size;
> + rxattr.lnotify_lpid = lpid;
> + rxattr.lnotify_pid = pid;
> + rxattr.lnotify_tid = tid;
> + rxattr.wcreds_max = MAX_CREDITS_PER_RXFIFO;
> +
> + /*
> + * Open a VAS receice window which is used to configure RxFIFO
> + * for NX.
> + */
> + rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr);
> + if (IS_ERR(rxwin)) {
> + ret = PTR_ERR(rxwin);
> + pr_err("setting RxFIFO with VAS failed: %d\n",
> + ret);
> + goto err_out;
> + }
> +
> + coproc->vas.rxwin = rxwin;
> + coproc->vas.id = vasid;
> + nx842_add_coprocs_list(coproc, chip_id);
> +
> + /*
> + * Kernel requests use only high priority FIFOs. So save coproc
> + * info in percpu coproc_inst which will be used to open send
> + * windows for crypto open requests later.
> + */
> + if (coproc->ct == VAS_COP_TYPE_842_HIPRI)
> + nx842_set_per_cpu_coproc(coproc);
> +
> + return 0;
> +
> +err_out:
> + kfree(coproc);
> + return ret;
> +}
> +
> +
> +static int __init nx842_powernv_probe_vas(struct device_node *pn)
> +{
> + struct device_node *dn;
> + int chip_id, vasid, rc = 0;
> +
> + chip_id = of_get_ibm_chip_id(pn);
> + if (chip_id < 0) {
> + pr_err("ibm,chip-id missing\n");
> + return -EINVAL;
> + }
> +
> + dn = of_find_compatible_node(pn, NULL, "ibm,power9-vas-x");
> +
> + if (!dn) {
> + pr_err("Missing VAS device node\n");
> + return -EINVAL;
> + }
> +
> + if (of_property_read_u32(dn, "ibm,vas-id", &vasid)) {
> + pr_err("Missing ibm,vas-id device property\n");
> + of_node_put(dn);
> + return -EINVAL;
> + }
> +
> + of_node_put(dn);
> +
> + for_each_child_of_node(pn, dn) {
> + if (of_device_is_compatible(dn, "ibm,p9-nx-842")) {
> + rc = vas_cfg_coproc_info(dn, chip_id, vasid);
> + if (rc) {
> + of_node_put(dn);
> + return rc;
> + }
> + }
> + }
> +
> + return 0;
> +}
> +
> static int __init nx842_powernv_probe(struct device_node *dn)
> {
> struct nx842_coproc *coproc;
> @@ -622,6 +924,9 @@ static void nx842_delete_coprocs(void)
> struct nx842_coproc *coproc, *n;
>
> list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
> + if (coproc->vas.rxwin)
> + vas_win_close(coproc->vas.rxwin);
> +
> list_del(&coproc->list);
> kfree(coproc);
> }
> @@ -643,6 +948,44 @@ static struct nx842_driver nx842_powernv_driver = {
> .decompress = nx842_powernv_decompress,
> };
>
> +static int nx842_powernv_crypto_init_vas(struct crypto_tfm *tfm)
> +{
> + struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
> + struct nx842_workmem *wmem;
> + struct nx842_coproc *coproc;
> + int ret;
> +
> + ret = nx842_crypto_init(tfm, &nx842_powernv_driver);
> +
> + if (ret)
> + return ret;
> +
> + wmem = (struct nx842_workmem *)ctx->wmem;
I think, you want to align wmem to WORKMEM_ALIGN boundary.
> + coproc = per_cpu(coproc_inst, smp_processor_id());
> +
> + ret = -EINVAL;
> + if (coproc && coproc->vas.rxwin) {
> + wmem->txwin = nx842_alloc_txwin(coproc);
> + if (!IS_ERR(wmem->txwin))
> + return 0;
> +
> + ret = PTR_ERR(wmem->txwin);
> + }
> +
> + return ret;
> +}
> +
> +void nx842_powernv_crypto_exit_vas(struct crypto_tfm *tfm)
> +{
> + struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
> + struct nx842_workmem *wmem = (struct nx842_workmem *)ctx->wmem;
here as well.
> +
> + if (wmem && wmem->txwin)
> + vas_win_close(wmem->txwin);
> +
> + nx842_crypto_exit(tfm);
> +}
> +
> static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
> {
> return nx842_crypto_init(tfm, &nx842_powernv_driver);
> @@ -676,13 +1019,27 @@ static __init int nx842_powernv_init(void)
> BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT);
> BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
>
> - for_each_compatible_node(dn, NULL, "ibm,power-nx")
> - nx842_powernv_probe(dn);
> + for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
> + ret = nx842_powernv_probe_vas(dn);
> + if (ret) {
> + nx842_delete_coprocs();
> + return ret;
> + }
> + }
>
> - if (!nx842_ct)
> - return -ENODEV;
> + if (list_empty(&nx842_coprocs)) {
> + for_each_compatible_node(dn, NULL, "ibm,power-nx")
> + nx842_powernv_probe(dn);
> +
> + if (!nx842_ct)
> + return -ENODEV;
>
> - nx842_powernv_exec = nx842_exec_icswx;
> + nx842_powernv_exec = nx842_exec_icswx;
> + } else {
> + nx842_powernv_exec = nx842_exec_vas;
> + nx842_powernv_alg.cra_init = nx842_powernv_crypto_init_vas;
> + nx842_powernv_alg.cra_exit = nx842_powernv_crypto_exit_vas;
> + }
>
> ret = crypto_register_alg(&nx842_powernv_alg);
> if (ret) {
> diff --git a/drivers/crypto/nx/nx-842.c b/drivers/crypto/nx/nx-842.c
> index d94e25df503b..da3cb8c35ec7 100644
> --- a/drivers/crypto/nx/nx-842.c
> +++ b/drivers/crypto/nx/nx-842.c
> @@ -116,7 +116,7 @@ int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver)
>
> spin_lock_init(&ctx->lock);
> ctx->driver = driver;
> - ctx->wmem = kmalloc(driver->workmem_size, GFP_KERNEL);
> + ctx->wmem = kzalloc(driver->workmem_size, GFP_KERNEL);
> ctx->sbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
> ctx->dbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
> if (!ctx->wmem || !ctx->sbounce || !ctx->dbounce) {
> --
> 2.11.0
>
>
--
Ram Pai
More information about the Linuxppc-dev
mailing list