[PATCH v2 06/20] powerpc/64: Make type of partition table flush depend on partition type
Paul Mackerras
paulus at ozlabs.org
Mon Jan 30 21:21:39 AEDT 2017
When changing a partition table entry on POWER9, we do a particular
form of the tlbie instruction which flushes all TLBs and caches of
the partition table for a given logical partition ID (LPID).
This instruction has a field in the instruction word, labelled R
(radix), which should be 1 if the partition was previously a radix
partition and 0 if it was a HPT partition. This implements that
logic.
Signed-off-by: Paul Mackerras <paulus at ozlabs.org>
---
arch/powerpc/mm/pgtable_64.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 8bca7f5..d6b5e5c 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -454,13 +454,23 @@ void __init mmu_partition_table_init(void)
void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0,
unsigned long dw1)
{
+ unsigned long old = be64_to_cpu(partition_tb[lpid].patb0);
+
partition_tb[lpid].patb0 = cpu_to_be64(dw0);
partition_tb[lpid].patb1 = cpu_to_be64(dw1);
- /* Global flush of TLBs and partition table caches for this lpid */
+ /*
+ * Global flush of TLBs and partition table caches for this lpid.
+ * The type of flush (hash or radix) depends on what the previous
+ * use of this partition ID was, not the new use.
+ */
asm volatile("ptesync" : : : "memory");
- asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : :
- "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ if (old & PATB_HR)
+ asm volatile(PPC_TLBIE_5(%0,%1,2,0,1) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ else
+ asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
asm volatile("eieio; tlbsync; ptesync" : : : "memory");
}
EXPORT_SYMBOL_GPL(mmu_partition_table_set_entry);
--
2.7.4
More information about the Linuxppc-dev
mailing list