ibmvtpm byteswapping inconsistency

[Benjamin Herrenschmidt]

On Fri, 2017-01-27 at 12:32 -0800, Tyrel Datwyler wrote:
> Its possible being the end of the week I'm just a little dense, but
> wouldn't be64_to_cpu() imply that we are byte-swapping something that is
> already, or supposedly already, in BE format to cpu endianness? Which on
> a BE cpu I would expect a no-op, and on a LE cpu the 64bit word to have
> been swapped from BE --> LE?

It's in BE format in memory. In LE mode, loading it into a register will
get it the wrong way around, thus we have to swap it again. Once in a
register it has no "endianness" per-se, what matters is that the act
of loading from memory to a register would have loaded it the wrong
way around in LE.

> In my eyes the code does seem to support what I've argued. The same
> thing is done in the scsi VIO drivers. The CRQ structure is laid out and
> annotated BE. We use cpu_to_be() calls to load any non 8bit field.
> Finally, each word is swapped to cpu endian when we hand it off for the
> hcall.
> 
> from ibmvfc_send_event():
> 
>         __be64 *crq_as_u64 = (__be64 *) &evt->crq;
> 
>         <..snip..>
> 
>         if ((rc = ibmvfc_send_crq(vhost, be64_to_cpu(crq_as_u64[0]),
>                                   be64_to_cpu(crq_as_u64[1])))) {
> 
> Again, maybe I'm missing something.