[PATCH 12/37] PCI: dwc: Create a new config symbol to enable pci dwc host
Joao Pinto
Joao.Pinto at synopsys.com
Sat Jan 14 04:50:43 AEDT 2017
Hi Kishon,
Às 10:26 AM de 1/12/2017, Kishon Vijay Abraham I escreveu:
> Now that pci designware host has a separate file, create a new
> config symbol to select the host only driver. This is in preparation
> to enable endpoint support to designware driver.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
> drivers/pci/dwc/Kconfig | 26 +++++++++++++++-----------
> drivers/pci/dwc/Makefile | 3 ++-
> drivers/pci/dwc/pcie-designware.h | 29 +++++++++++++++++++++++++----
> 3 files changed, 42 insertions(+), 16 deletions(-)
>
You are already working in a base where dwc/ already exists. I know you made a
rename / re-structure patch for pci, but I think it was not yet accepted, right?
I don't see it in any of Bjorn' dev branches.
Thanks.
> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
> index 8b08519..d0bdfb5 100644
> --- a/drivers/pci/dwc/Kconfig
> +++ b/drivers/pci/dwc/Kconfig
> @@ -3,13 +3,17 @@ menu "DesignWare PCI Core Support"
>
> config PCIE_DW
> bool
> +
> +config PCIE_DW_HOST
> + bool
> depends on PCI_MSI_IRQ_DOMAIN
> + select PCIE_DW
>
> config PCI_DRA7XX
> bool "TI DRA7xx PCIe controller"
> depends on OF && HAS_IOMEM && TI_PIPE3
> depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Enables support for the PCIe controller in the DRA7xx SoC. There
> are two instances of PCIe controller in DRA7xx. This controller can
> @@ -18,7 +22,7 @@ config PCI_DRA7XX
> config PCIE_DW_PLAT
> bool "Platform bus based DesignWare PCIe Controller"
> depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> + select PCIE_DW_HOST
> ---help---
> This selects the DesignWare PCIe controller support. Select this if
> you have a PCIe controller on Platform bus.
> @@ -32,21 +36,21 @@ config PCI_EXYNOS
> depends on SOC_EXYNOS5440 || COMPILE_TEST
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
>
> config PCI_IMX6
> bool "Freescale i.MX6 PCIe controller"
> depends on SOC_IMX6Q || COMPILE_TEST
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
>
> config PCIE_SPEAR13XX
> bool "STMicroelectronics SPEAr PCIe controller"
> depends on ARCH_SPEAR13XX || COMPILE_TEST
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Say Y here if you want PCIe support on SPEAr13XX SoCs.
>
> @@ -55,7 +59,7 @@ config PCI_KEYSTONE
> depends on ARCH_KEYSTONE || COMPILE_TEST
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Say Y here if you want to enable PCI controller support on Keystone
> SoCs. The PCI controller on Keystone is based on Designware hardware
> @@ -67,7 +71,7 @@ config PCI_LAYERSCAPE
> depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> depends on PCI_MSI_IRQ_DOMAIN
> select MFD_SYSCON
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Say Y here if you want PCIe controller support on Layerscape SoCs.
>
> @@ -76,7 +80,7 @@ config PCI_HISI
> bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Say Y here if you want PCIe controller support on HiSilicon
> Hip05 and Hip06 SoCs
> @@ -86,7 +90,7 @@ config PCIE_QCOM
> depends on (ARCH_QCOM || COMPILE_TEST) && OF
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Say Y here to enable PCIe controller support on Qualcomm SoCs. The
> PCIe controller uses the Designware core plus Qualcomm-specific
> @@ -97,7 +101,7 @@ config PCIE_ARMADA_8K
> depends on ARCH_MVEBU || COMPILE_TEST
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Say Y here if you want to enable PCIe controller support on
> Armada-8K SoCs. The PCIe controller on Armada-8K is based on
> @@ -109,7 +113,7 @@ config PCIE_ARTPEC6
> depends on MACH_ARTPEC6 || COMPILE_TEST
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIEPORTBUS
> - select PCIE_DW
> + select PCIE_DW_HOST
> help
> Say Y here to enable PCIe controller support on Axis ARTPEC-6
> SoCs. This PCIe controller uses the DesignWare core.
> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
> index 3b57e55..a2df13c 100644
> --- a/drivers/pci/dwc/Makefile
> +++ b/drivers/pci/dwc/Makefile
> @@ -1,4 +1,5 @@
> -obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o
> +obj-$(CONFIG_PCIE_DW) += pcie-designware.o
> +obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
> obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
> obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
> obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> index 808d17b..8f3dcb2 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -162,10 +162,6 @@ struct dw_pcie {
>
> int dw_pcie_read(void __iomem *addr, int size, u32 *val);
> int dw_pcie_write(void __iomem *addr, int size, u32 val);
> -irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
> -void dw_pcie_msi_init(struct pcie_port *pp);
> -void dw_pcie_setup_rc(struct pcie_port *pp);
> -int dw_pcie_host_init(struct pcie_port *pp);
>
> u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg);
> void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
> @@ -175,4 +171,29 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> int type, u64 cpu_addr, u64 pci_addr,
> u32 size);
> void dw_pcie_setup(struct dw_pcie *pci);
> +
> +#ifdef CONFIG_PCIE_DW_HOST
> +irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
> +void dw_pcie_msi_init(struct pcie_port *pp);
> +void dw_pcie_setup_rc(struct pcie_port *pp);
> +int dw_pcie_host_init(struct pcie_port *pp);
> +#else
> +static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
> +{
> + return IRQ_NONE;
> +}
> +
> +static inline void dw_pcie_msi_init(struct pcie_port *pp)
> +{
> +}
> +
> +static inline void dw_pcie_setup_rc(struct pcie_port *pp)
> +{
> +}
> +
> +static inline int dw_pcie_host_init(struct pcie_port *pp)
> +{
> + return 0;
> +}
> +#endif
> #endif /* _PCIE_DESIGNWARE_H */
>
More information about the Linuxppc-dev
mailing list