[PATCH 04/37] PCI: dwc: designware: Move the register defines to designware header file
Kishon Vijay Abraham I
kishon at ti.com
Thu Jan 12 21:25:53 AEDT 2017
No functional change. Move the register defines and other macros from
pcie-designware.c to pcie-designware.h. This is in preparation to
split the pcie-designware.c file into designware core file and host
specific file.
While at that also fix a checkpatch warning.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
drivers/pci/dwc/pcie-designware.c | 70 ------------------------------------
drivers/pci/dwc/pcie-designware.h | 71 +++++++++++++++++++++++++++++++++++++
2 files changed, 71 insertions(+), 70 deletions(-)
diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index d68bc7b..0b928dc 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -25,76 +25,6 @@
#include "pcie-designware.h"
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES 10
-#define LINK_WAIT_USLEEP_MIN 90000
-#define LINK_WAIT_USLEEP_MAX 100000
-
-/* Parameters for the waiting for iATU enabled routine */
-#define LINK_WAIT_MAX_IATU_RETRIES 5
-#define LINK_WAIT_IATU_MIN 9000
-#define LINK_WAIT_IATU_MAX 10000
-
-/* Synopsys-specific PCIe configuration registers */
-#define PCIE_PORT_LINK_CONTROL 0x710
-#define PORT_LINK_MODE_MASK (0x3f << 16)
-#define PORT_LINK_MODE_1_LANES (0x1 << 16)
-#define PORT_LINK_MODE_2_LANES (0x3 << 16)
-#define PORT_LINK_MODE_4_LANES (0x7 << 16)
-#define PORT_LINK_MODE_8_LANES (0xf << 16)
-
-#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
-#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
-#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
-#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
-#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
-#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
-#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
-
-#define PCIE_MSI_ADDR_LO 0x820
-#define PCIE_MSI_ADDR_HI 0x824
-#define PCIE_MSI_INTR0_ENABLE 0x828
-#define PCIE_MSI_INTR0_MASK 0x82C
-#define PCIE_MSI_INTR0_STATUS 0x830
-
-#define PCIE_ATU_VIEWPORT 0x900
-#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
-#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
-#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
-#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
-#define PCIE_ATU_CR1 0x904
-#define PCIE_ATU_TYPE_MEM (0x0 << 0)
-#define PCIE_ATU_TYPE_IO (0x2 << 0)
-#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
-#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
-#define PCIE_ATU_CR2 0x908
-#define PCIE_ATU_ENABLE (0x1 << 31)
-#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
-#define PCIE_ATU_LOWER_BASE 0x90C
-#define PCIE_ATU_UPPER_BASE 0x910
-#define PCIE_ATU_LIMIT 0x914
-#define PCIE_ATU_LOWER_TARGET 0x918
-#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
-#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
-#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
-#define PCIE_ATU_UPPER_TARGET 0x91C
-
-/*
- * iATU Unroll-specific register definitions
- * From 4.80 core version the address translation will be made by unroll
- */
-#define PCIE_ATU_UNR_REGION_CTRL1 0x00
-#define PCIE_ATU_UNR_REGION_CTRL2 0x04
-#define PCIE_ATU_UNR_LOWER_BASE 0x08
-#define PCIE_ATU_UNR_UPPER_BASE 0x0C
-#define PCIE_ATU_UNR_LIMIT 0x10
-#define PCIE_ATU_UNR_LOWER_TARGET 0x14
-#define PCIE_ATU_UNR_UPPER_TARGET 0x18
-
-/* Register address builder */
-#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((0x3 << 20) | (region << 9))
-
/* PCIe Port Logic registers */
#define PLR_OFFSET 0x700
#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index 32f4602..a6cf9262 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -14,6 +14,77 @@
#ifndef _PCIE_DESIGNWARE_H
#define _PCIE_DESIGNWARE_H
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP_MIN 90000
+#define LINK_WAIT_USLEEP_MAX 100000
+
+/* Parameters for the waiting for iATU enabled routine */
+#define LINK_WAIT_MAX_IATU_RETRIES 5
+#define LINK_WAIT_IATU_MIN 9000
+#define LINK_WAIT_IATU_MAX 10000
+
+/* Synopsys-specific PCIe configuration registers */
+#define PCIE_PORT_LINK_CONTROL 0x710
+#define PORT_LINK_MODE_MASK (0x3f << 16)
+#define PORT_LINK_MODE_1_LANES (0x1 << 16)
+#define PORT_LINK_MODE_2_LANES (0x3 << 16)
+#define PORT_LINK_MODE_4_LANES (0x7 << 16)
+#define PORT_LINK_MODE_8_LANES (0xf << 16)
+
+#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
+#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
+#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
+#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
+#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
+#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
+#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
+
+#define PCIE_MSI_ADDR_LO 0x820
+#define PCIE_MSI_ADDR_HI 0x824
+#define PCIE_MSI_INTR0_ENABLE 0x828
+#define PCIE_MSI_INTR0_MASK 0x82C
+#define PCIE_MSI_INTR0_STATUS 0x830
+
+#define PCIE_ATU_VIEWPORT 0x900
+#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
+#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
+#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
+#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
+#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
+#define PCIE_ATU_CR1 0x904
+#define PCIE_ATU_TYPE_MEM (0x0 << 0)
+#define PCIE_ATU_TYPE_IO (0x2 << 0)
+#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
+#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
+#define PCIE_ATU_CR2 0x908
+#define PCIE_ATU_ENABLE (0x1 << 31)
+#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
+#define PCIE_ATU_LOWER_BASE 0x90C
+#define PCIE_ATU_UPPER_BASE 0x910
+#define PCIE_ATU_LIMIT 0x914
+#define PCIE_ATU_LOWER_TARGET 0x918
+#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
+#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
+#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
+#define PCIE_ATU_UPPER_TARGET 0x91C
+
+/*
+ * iATU Unroll-specific register definitions
+ * From 4.80 core version the address translation will be made by unroll
+ */
+#define PCIE_ATU_UNR_REGION_CTRL1 0x00
+#define PCIE_ATU_UNR_REGION_CTRL2 0x04
+#define PCIE_ATU_UNR_LOWER_BASE 0x08
+#define PCIE_ATU_UNR_UPPER_BASE 0x0C
+#define PCIE_ATU_UNR_LIMIT 0x10
+#define PCIE_ATU_UNR_LOWER_TARGET 0x14
+#define PCIE_ATU_UNR_UPPER_TARGET 0x18
+
+/* Register address builder */
+#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
+ ((0x3 << 20) | ((region) << 9))
+
/*
* Maximum number of MSI IRQs can be 256 per controller. But keep
* it 32 as of now. Probably we will never need more than 32. If needed,
--
1.7.9.5
More information about the Linuxppc-dev
mailing list