[PATCH 9/9] powerpc: A new cache geometry aux vectors

Wed Jan 11 03:26:13 AEDT 2017

On Tue, 2017-01-10 at 10:16 -0600, Paul Clarke wrote:
> On 01/08/2017 05:31 PM, Benjamin Herrenschmidt wrote:
> > This adds AUX vectors for the L1I,D, L2 and L3 cache levels
> > providing for each cache level the size of the cache in bytes
> > and the geometry (line size and number of ways).
> > 
> > We chose to not use the existing alpha/sh definition which
> > packs all the information in a single entry per cache level as
> > it is too restricted to represent some of the geometries used
> > on POWER.
> > diff --git a/arch/powerpc/include/asm/cache.h
> > b/arch/powerpc/include/asm/cache.h
> > index 3987bd9..1557d26 100644
> > --- a/arch/powerpc/include/asm/cache.h
> > +++ b/arch/powerpc/include/asm/cache.h
> > @@ -35,6 +35,7 @@ struct ppc_cache_info {
> >  	u32 log_block_size;
> >  	u32 blocks_per_page;
> >  	u32 sets;
> > +	u32 assoc;
> 
> Associativity is defined as u32...
> 
> >  };
> > 
> >  struct ppc64_caches {
> > diff --git a/arch/powerpc/include/asm/elf.h
> > b/arch/powerpc/include/asm/elf.h
> > index 730c27e..a128836 100644
> > --- a/arch/powerpc/include/asm/elf.h
> > +++ b/arch/powerpc/include/asm/elf.h
> > +extern long il1cache_shape;
> > +extern long dl1cache_shape;
> > +extern long l2cache_shape;
> > +extern long l3cache_shape;
> 
> shapes are "long"...

Those are obsolete definitions from the previous implementation, I
forgot to remove them.

> > @@ -136,6 +140,9 @@ extern int arch_setup_additional_pages(struct
> > linux_binprm *bprm,
> > 
> >  #endif /* CONFIG_SPU_BASE */
> > 
> > +#define get_cache_shape(level) \
> > +	(ppc64_caches.level.assoc << 16 |
> > ppc64_caches.level.line_size)
> 
> Now we stuff u32 assoc into 16 bits.

Right. Not a huge deal.

> What's the reason behind combining associativity and cache line size
> into a single field?

Because we are already creating way too many AT_* entries, I don't want
to add 4 more.

> Likely the most requested values will be cache line size and (maybe)
> cache size.  The latter is a simple query with these changes, but the
> former is now a query and some awkward mask/shift.  

A simple mask, not *that* awkward.

> I don't think we're currently providing accessor macros, although I
> guess those can be added to glibc.  Would it not be simpler, though,
> to just add independent queries for each of cache line size and
> associativity?
> - AT_L1I_CACHESIZE
> - AT_L1I_CACHE_LINE_SIZE
> - AT_L1I_CACHE_ASSOC
> etc.
> 
> Is there a big "con" to having a few more AUXV entries?

We already *multiplied* the number of arch entries and I think we're
the only arch to do that... at that point, I'm starting to prefer
something in the VDSO...

Ben.

> Regards,
> PC
> 
> > @@ -156,6 +163,14 @@ do {						
> > 			\
> >  	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			
> > \
> >  	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			
> > \
> >  	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm-
> > >context.vdso_base);	\
> > +	NEW_AUX_ENT(AT_L1I_CACHESIZE, ppc64_caches.l1i.size);	
> > 	\
> > +	NEW_AUX_ENT(AT_L1I_CACHEGEOMETRY, get_cache_shape(l1i));	
> > \
> > +	NEW_AUX_ENT(AT_L1D_CACHESIZE, ppc64_caches.l1i.size);	
> > 	\
> > +	NEW_AUX_ENT(AT_L1D_CACHEGEOMETRY, get_cache_shape(l1i));	
> > \
> > +	NEW_AUX_ENT(AT_L2_CACHESIZE, ppc64_caches.l2.size);	
> > 	\
> > +	NEW_AUX_ENT(AT_L2_CACHEGEOMETRY, get_cache_shape(l2));	
> > 	\
> > +	NEW_AUX_ENT(AT_L3_CACHESIZE, ppc64_caches.l3.size);	
> > 	\
> > +	NEW_AUX_ENT(AT_L3_CACHEGEOMETRY, get_cache_shape(l3));	
> > 	\
> >  } while (0)
> > 
> >  #endif /* _ASM_POWERPC_ELF_H */
> > diff --git a/arch/powerpc/include/uapi/asm/auxvec.h
> > b/arch/powerpc/include/uapi/asm/auxvec.h
> > index ce17d2c..be6e94e 100644
> > --- a/arch/powerpc/include/uapi/asm/auxvec.h
> > +++ b/arch/powerpc/include/uapi/asm/auxvec.h
> > @@ -16,6 +16,37 @@
> >   */
> >  #define AT_SYSINFO_EHDR		33
> > 
> > -#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
> > +/*
> > + * AT_*CACHEBSIZE above represent the cache *block* size which is
> > + * the size that is affected by the cache management instructions.
> > + *
> > + * It doesn't nececssarily matches the cache *line* size which is
> > + * more of a performance tuning hint. Additionally the latter can
> > + * be different for the different cache levels.
> > + *
> > + * The set of entries below represent more extensive information
> > + * about the caches, in the form of two entry per cache type,
> > + * one entry containing the cache size in bytes, and the other
> > + * containing the cache line size in bytes in the bottom 16 bits
> > + * and the cache associativity in the next 16 bits.
> > + *
> > + * The associativity is such that if N is the 16-bit value, the
> > + * cache is N way set associative. A value if 0xffff means fully
> > + * associative, a value of 1 means directly mapped.
> > + *
> > + * For all these fields, a value of 0 means that the information
> > + * is not known.
> > + */
> > +
> > +#define AT_L1I_CACHESIZE	40
> > +#define AT_L1I_CACHEGEOMETRY	41
> > +#define AT_L1D_CACHESIZE	42
> > +#define AT_L1D_CACHEGEOMETRY	43
> > +#define AT_L2_CACHESIZE		44
> > +#define AT_L2_CACHEGEOMETRY	45
> > +#define AT_L3_CACHESIZE		46
> > +#define AT_L3_CACHEGEOMETRY	47
> > +
> > +#define AT_VECTOR_SIZE_ARCH	14 /* entries in ARCH_DLINFO */
> > 
> >  #endif
> > diff --git a/arch/powerpc/kernel/setup-common.c
> > b/arch/powerpc/kernel/setup-common.c
> > index e0eeed4..cfa2a06 100644
> > --- a/arch/powerpc/kernel/setup-common.c
> > +++ b/arch/powerpc/kernel/setup-common.c
> > @@ -94,7 +94,10 @@ EXPORT_SYMBOL_GPL(boot_cpuid);
> >  int dcache_bsize;
> >  int icache_bsize;
> >  int ucache_bsize;
> > -
> > +long il1cache_shape = -1;
> > +long dl1cache_shape = -1;
> > +long l2cache_shape = -1;
> > +long l3cache_shape = -1;
> > 
> >  unsigned long klimit = (unsigned long) _end;
> > 
> > diff --git a/arch/powerpc/kernel/setup_64.c
> > b/arch/powerpc/kernel/setup_64.c
> > index b3c93d8..16cb0b7 100644
> > --- a/arch/powerpc/kernel/setup_64.c
> > +++ b/arch/powerpc/kernel/setup_64.c
> > @@ -451,6 +451,10 @@ static bool __init parse_cache_info(struct
> > device_node *np,
> >  	info->block_size = bsize;
> >  	info->log_block_size = __ilog2(bsize);
> >  	info->blocks_per_page = PAGE_SIZE / bsize;
> > +	if (sets == 0)
> > +		info->assoc = 0xffff;
> > +	else
> > +		info->assoc = size / (sets * lsize);
> > 
> >  	return success;
> >  }
> > 