[Patch V7 4/4] irqchip/qeic: remove PPCisms for QEIC
Marc Zyngier
marc.zyngier at arm.com
Fri Jan 6 04:04:40 AEDT 2017
On 26/12/16 08:32, Zhao Qiang wrote:
> QEIC was supported on PowerPC, and dependent on PPC,
> Now it is supported on other platforms, so remove PPCisms.
>
> Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
> ---
> Changes for v6:
> - new added
> Changes for v7:
> - fix warning
>
> drivers/irqchip/irq-qeic.c | 34 ++++++++++++++++++++--------------
> include/soc/fsl/qe/qe_ic.h | 12 ++++++------
> 2 files changed, 26 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
> index 4f49d4b..957ea5b 100644
> --- a/drivers/irqchip/irq-qeic.c
> +++ b/drivers/irqchip/irq-qeic.c
> @@ -18,7 +18,10 @@
> #include <linux/of_address.h>
> #include <linux/kernel.h>
> #include <linux/init.h>
> +#include <linux/irqdomain.h>
> #include <linux/errno.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> #include <linux/reboot.h>
> #include <linux/slab.h>
> #include <linux/stddef.h>
> @@ -88,7 +91,7 @@
>
> struct qe_ic {
> /* Control registers offset */
> - volatile u32 __iomem *regs;
> + u32 __iomem *regs;
>
> /* The remapper for this QEIC */
> struct irq_domain *irqhost;
> @@ -264,15 +267,15 @@ static struct qe_ic_info qe_ic_info[] = {
> },
> };
>
> -static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
> +static inline u32 qe_ic_read(__be32 __iomem * base, unsigned int reg)
> {
> - return in_be32(base + (reg >> 2));
> + return ioread32be(base + (reg >> 2));
> }
>
> -static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
> +static inline void qe_ic_write(__be32 __iomem * base, unsigned int reg,
> u32 value)
> {
> - out_be32(base + (reg >> 2), value);
> + iowrite32be(value, base + (reg >> 2));
> }
>
> static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
> @@ -374,7 +377,7 @@ static const struct irq_domain_ops qe_ic_host_ops = {
> .xlate = irq_domain_xlate_onetwocell,
> };
>
> -/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
> +/* Return an interrupt vector or 0 if no interrupt is pending. */
> unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
Why isn't this static?
> {
> int irq;
> @@ -385,12 +388,12 @@ unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
> irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
>
> if (irq == 0)
> - return NO_IRQ;
> + return 0;
>
> return irq_linear_revmap(qe_ic->irqhost, irq);
> }
>
> -/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
> +/* Return an interrupt vector or 0 if no interrupt is pending. */
> unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
and this ? And all the functions in that file while you're at it?
> {
> int irq;
> @@ -401,7 +404,7 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
> irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
>
> if (irq == 0)
> - return NO_IRQ;
> + return 0;
>
> return irq_linear_revmap(qe_ic->irqhost, irq);
> }
> @@ -447,7 +450,7 @@ static int __init qe_ic_init(unsigned int flags)
> qe_ic->virq_high = irq_of_parse_and_map(node, 0);
> qe_ic->virq_low = irq_of_parse_and_map(node, 1);
>
> - if (qe_ic->virq_low == NO_IRQ) {
> + if (qe_ic->virq_low == 0) {
> pr_err("Failed to map QE_IC low IRQ\n");
> ret = -ENOMEM;
> goto err_domain_remove;
> @@ -479,7 +482,7 @@ static int __init qe_ic_init(unsigned int flags)
> irq_set_handler_data(qe_ic->virq_low, qe_ic);
> irq_set_chained_handler(qe_ic->virq_low, qe_ic_cascade_low_mpic);
>
> - if (qe_ic->virq_high != NO_IRQ &&
> + if (qe_ic->virq_high != 0 &&
> qe_ic->virq_high != qe_ic->virq_low) {
> irq_set_handler_data(qe_ic->virq_high, qe_ic);
> irq_set_chained_handler(qe_ic->virq_high,
> @@ -500,7 +503,8 @@ err_put_node:
> void qe_ic_set_highest_priority(unsigned int virq, int high)
> {
> struct qe_ic *qe_ic = qe_ic_from_irq(virq);
> - unsigned int src = virq_to_hw(virq);
> + struct irq_data *irq_data = irq_get_irq_data(virq);
> + irq_hw_number_t src = WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
> u32 temp = 0;
>
> temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
> @@ -518,7 +522,8 @@ void qe_ic_set_highest_priority(unsigned int virq, int high)
> int qe_ic_set_priority(unsigned int virq, unsigned int priority)
> {
> struct qe_ic *qe_ic = qe_ic_from_irq(virq);
> - unsigned int src = virq_to_hw(virq);
> + struct irq_data *irq_data = irq_get_irq_data(virq);
> + irq_hw_number_t src = WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
> u32 temp;
>
> if (priority > 8 || priority == 0)
> @@ -548,7 +553,8 @@ int qe_ic_set_priority(unsigned int virq, unsigned int priority)
> int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
> {
> struct qe_ic *qe_ic = qe_ic_from_irq(virq);
> - unsigned int src = virq_to_hw(virq);
> + struct irq_data *irq_data = irq_get_irq_data(virq);
> + irq_hw_number_t src = WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
> u32 temp, control_reg = QEIC_CICNR, shift = 0;
>
> if (priority > 2 || priority == 0)
> diff --git a/include/soc/fsl/qe/qe_ic.h b/include/soc/fsl/qe/qe_ic.h
> index 6113699..863cfec 100644
> --- a/include/soc/fsl/qe/qe_ic.h
> +++ b/include/soc/fsl/qe/qe_ic.h
> @@ -76,7 +76,7 @@ static inline void qe_ic_cascade_low_ipic(struct irq_desc *desc)
Why do we have a bunch of static inline functions here? Why do have that
file at all?
> struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
> unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
>
> - if (cascade_irq != NO_IRQ)
> + if (cascade_irq != 0)
> generic_handle_irq(cascade_irq);
> }
>
> @@ -85,7 +85,7 @@ static inline void qe_ic_cascade_high_ipic(struct irq_desc *desc)
> struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
> unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
>
> - if (cascade_irq != NO_IRQ)
> + if (cascade_irq != 0)
> generic_handle_irq(cascade_irq);
> }
>
> @@ -95,7 +95,7 @@ static inline void qe_ic_cascade_low_mpic(struct irq_desc *desc)
> unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
> struct irq_chip *chip = irq_desc_get_chip(desc);
>
> - if (cascade_irq != NO_IRQ)
> + if (cascade_irq != 0)
> generic_handle_irq(cascade_irq);
>
> chip->irq_eoi(&desc->irq_data);
> @@ -107,7 +107,7 @@ static inline void qe_ic_cascade_high_mpic(struct irq_desc *desc)
> unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
> struct irq_chip *chip = irq_desc_get_chip(desc);
>
> - if (cascade_irq != NO_IRQ)
> + if (cascade_irq != 0)
> generic_handle_irq(cascade_irq);
>
> chip->irq_eoi(&desc->irq_data);
> @@ -120,10 +120,10 @@ static inline void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
> struct irq_chip *chip = irq_desc_get_chip(desc);
>
> cascade_irq = qe_ic_get_high_irq(qe_ic);
> - if (cascade_irq == NO_IRQ)
> + if (cascade_irq == 0)
> cascade_irq = qe_ic_get_low_irq(qe_ic);
>
> - if (cascade_irq != NO_IRQ)
> + if (cascade_irq != 0)
> generic_handle_irq(cascade_irq);
>
> chip->irq_eoi(&desc->irq_data);
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
More information about the Linuxppc-dev
mailing list