[PATCH] dt-bindings: qman: Remove pool channel node

[Madalin Bucur]

From: Scott Wood <oss at buserror.net>

No device tree has these, nor does any driver look for them.

Signed-off-by: Scott Wood <oss at buserror.net>
---
 .../devicetree/bindings/soc/fsl/qman-portals.txt     | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
index 47e46cc..5a34f3a 100644
--- a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
@@ -5,7 +5,6 @@ Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
 CONTENTS
 
 	- QMan Portal
-	- QMan Pool Channel
 	- Example
 
 QMan Portal Node
@@ -82,25 +81,6 @@ These subnodes should have the following properties:
 	Definition:	The phandle to the particular hardware device that this
 			portal is connected to.
 
-DPAA QMan Pool Channel Nodes
-
-Pool Channels are defined with the following properties.
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman-pool-channel"
-			May include "fsl,<SoC>-qman-pool-channel"
-
-- fsl,qman-channel-id
-	Usage:		Required
-	Value type:	<u32>
-	Definition:	The hardware index of the channel. This can also be
-			determined by dividing any of the channel's 8 work queue
-			IDs by 8
-
 EXAMPLE
 
 The example below shows a (P4080) QMan portals container/bus node with two portals
-- 
2.1.0