[PATCH 2/3] powerpc: add helper to check if offset is within rel branch range

[Anju T Sudhakar]

To permit the use of relative branch instruction in powerpc, the target 
address has to be relatively nearby, since the address is specified in an 
immediate field (24 bit filed) in the instruction opcode itself. Here 
nearby refers to 32MB on either side of the current instruction.

This patch verifies whether the target address is within +/- 32MB
range or not.

Signed-off-by: Naveen N. Rao <naveen.n.rao at linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/code-patching.h |  1 +
 arch/powerpc/lib/code-patching.c         | 24 +++++++++++++++++++++++-
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 2015b07..75ee4f4 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -22,6 +22,7 @@
 #define BRANCH_SET_LINK	0x1
 #define BRANCH_ABSOLUTE	0x2
 
+bool is_offset_in_branch_range(long offset);
 unsigned int create_branch(const unsigned int *addr,
 			   unsigned long target, int flags);
 unsigned int create_cond_branch(const unsigned int *addr,
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index d5edbeb..f643451 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -32,6 +32,28 @@ int patch_branch(unsigned int *addr, unsigned long target, int flags)
 	return patch_instruction(addr, create_branch(addr, target, flags));
 }
 
+bool is_offset_in_branch_range(long offset)
+{
+	/*
+	 * Powerpc branch instruction is :
+	 *
+	 *  0         6                 30   31
+	 *  +---------+----------------+---+---+
+	 *  | opcode  |     LI         |AA |LK |
+	 *  +---------+----------------+---+---+
+	 *  Where AA = 0 and LK = 0
+	 *
+	 * LI is a signed 24 bits integer. The real branch offset is computed
+	 * by: imm32 = SignExtend(LI:'0b00', 32);
+	 *
+	 * So the maximum forward branch should be:
+	 *   (0x007fffff << 2) = 0x01fffffc =  0x1fffffc
+	 * The maximum backward branch should be:
+	 *   (0xff800000 << 2) = 0xfe000000 = -0x2000000
+	 */
+	return (offset >= -0x2000000 && offset <= 0x1fffffc && !(offset & 0x3));
+}
+
 unsigned int create_branch(const unsigned int *addr,
 			   unsigned long target, int flags)
 {
@@ -43,7 +65,7 @@ unsigned int create_branch(const unsigned int *addr,
 		offset = offset - (unsigned long)addr;
 
 	/* Check we can represent the target in the instruction format */
-	if (offset < -0x2000000 || offset > 0x1fffffc || offset & 0x3)
+	if (!is_offset_in_branch_range(offset))
 		return 0;
 
 	/* Mask out the flags and target, so they don't step on each other. */
-- 
2.7.4