[PATCH 02/13] powerpc/powernv: Set correct configuration space size for opencapi devices

[Andrew Donnellan]

On 19/12/17 02:21, Frederic Barrat wrote:
>  From Andrew Donnellan <andrew.donnellan at au1.ibm.com>

Good try :) That should be "From: ..."

git format-patch/send-email will handle this automatically if the commit 
author is set correctly, ie:

git commit --amend --author="Andrew Donnellan 
<andrew.donnellan at au1.ibm.com>"

> 
> The configuration space for opencapi devices doesn't have a PCI
> Express capability, therefore confusing linux in thinking it's of an
> old PCI type with a 256-byte configuration space size, instead of the
> desired 4k. So add a PCI fixup to declare the correct size.
> 
> 
> Signed-off-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
> Signed-off-by: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
> ---
>   arch/powerpc/platforms/powernv/pci-ioda.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index c37b5d288f9c..b8ec76aa266f 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -4079,6 +4079,16 @@ void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np)
>   	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI);
>   }
> 
> +static void pnv_npu2_opencapi_cfg_size_fixup(struct pci_dev *dev)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(dev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +
> +	if (phb->type == PNV_PHB_NPU_OCAPI)
> +		dev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pnv_npu2_opencapi_cfg_size_fixup);
> +
>   void __init pnv_pci_init_ioda_hub(struct device_node *np)
>   {
>   	struct device_node *phbn;
> 

-- 
Andrew Donnellan              OzLabs, ADL Canberra
andrew.donnellan at au1.ibm.com  IBM Australia Limited