[PATCH v4 2/2] cxl: read PHB indications from the device tree

Philippe Bergheaud felix at linux.vnet.ibm.com
Sat Dec 16 00:48:18 AEDT 2017


Configure the P9 XSL_DSNCTL register with PHB indications found
in the device tree, or else use legacy hard-coded values.

Signed-off-by: Philippe Bergheaud <felix at linux.vnet.ibm.com>
---
Changelog:

v2: New patch. Use the new device tree property "ibm,phb-indications".

v3: No change.

v4: No functional change.
    Drop cosmetic fix in comment.

This patch depends on the following skiboot prerequisite:

https://patchwork.ozlabs.org/patch/849162/
---
 drivers/misc/cxl/cxl.h    |  2 +-
 drivers/misc/cxl/cxllib.c |  2 +-
 drivers/misc/cxl/pci.c    | 40 +++++++++++++++++++++++++++++++++++-----
 3 files changed, 37 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index e46a4062904a..5a6e9a921c2b 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -1062,7 +1062,7 @@ int cxl_psl_purge(struct cxl_afu *afu);
 int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid,
 			  u32 *phb_index, u64 *capp_unit_id);
 int cxl_slot_is_switched(struct pci_dev *dev);
-int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg);
+int cxl_get_xsl9_dsnctl(struct pci_dev *dev, u64 capp_unit_id, u64 *reg);
 u64 cxl_calculate_sr(bool master, bool kernel, bool real_mode, bool p9);
 
 void cxl_native_irq_dump_regs_psl9(struct cxl_context *ctx);
diff --git a/drivers/misc/cxl/cxllib.c b/drivers/misc/cxl/cxllib.c
index dc9bc1807fdf..61f80d586279 100644
--- a/drivers/misc/cxl/cxllib.c
+++ b/drivers/misc/cxl/cxllib.c
@@ -99,7 +99,7 @@ int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg)
 	if (rc)
 		return rc;
 
-	rc = cxl_get_xsl9_dsnctl(capp_unit_id, &cfg->dsnctl);
+	rc = cxl_get_xsl9_dsnctl(dev, capp_unit_id, &cfg->dsnctl);
 	if (rc)
 		return rc;
 	if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 19969ee86d6f..c58fb28685af 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -409,7 +409,36 @@ int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid,
 	return 0;
 }
 
-int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg)
+static u64 nbwind = 0;
+static u64 asnind = 0;
+static u64 capiind = 0;
+
+static int get_phb_indications(struct pci_dev *dev)
+{
+	struct device_node *np;
+	const __be32 *prop;
+
+	if (capiind)
+		return 0;
+
+	if (!(np = pnv_pci_get_phb_node(dev)))
+		return -1;
+
+	prop = of_get_property(np, "ibm,phb-indications", NULL);
+	if (!prop) {
+		nbwind = 0x0300UL; /* legacy values */
+		asnind = 0x0400UL;
+		capiind = 0x0200UL;
+	} else {
+		nbwind = (u64)be32_to_cpu(prop[2]);
+		asnind = (u64)be32_to_cpu(prop[1]);
+		capiind = (u64)be32_to_cpu(prop[0]);
+	}
+	of_node_put(np);
+	return 0;
+}
+
+int cxl_get_xsl9_dsnctl(struct pci_dev *dev, u64 capp_unit_id, u64 *reg)
 {
 	u64 xsl_dsnctl;
 
@@ -423,7 +452,8 @@ int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg)
 	 * Tell XSL where to route data to.
 	 * The field chipid should match the PHB CAPI_CMPM register
 	 */
-	xsl_dsnctl = ((u64)0x2 << (63-7)); /* Bit 57 */
+	get_phb_indications(dev);
+	xsl_dsnctl = (capiind << (63-15)); /* Bit 57 */
 	xsl_dsnctl |= (capp_unit_id << (63-15));
 
 	/* nMMU_ID Defaults to: b’000001001’*/
@@ -437,14 +467,14 @@ int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg)
 		 * nbwind=0x03, bits [57:58], must include capi indicator.
 		 * Not supported on P9 DD1.
 		 */
-		xsl_dsnctl |= ((u64)0x03 << (63-47));
+		xsl_dsnctl |= (nbwind << (63-55));
 
 		/*
 		 * Upper 16b address bits of ASB_Notify messages sent to the
 		 * system. Need to match the PHB’s ASN Compare/Mask Register.
 		 * Not supported on P9 DD1.
 		 */
-		xsl_dsnctl |= ((u64)0x04 << (63-55));
+		xsl_dsnctl |= asnind;
 	}
 
 	*reg = xsl_dsnctl;
@@ -464,7 +494,7 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter,
 	if (rc)
 		return rc;
 
-	rc = cxl_get_xsl9_dsnctl(capp_unit_id, &xsl_dsnctl);
+	rc = cxl_get_xsl9_dsnctl(dev, capp_unit_id, &xsl_dsnctl);
 	if (rc)
 		return rc;
 
-- 
2.15.0



More information about the Linuxppc-dev mailing list