[PATCH] powerpc/sysdev: change CPM GPIO to platform_device
Christophe Leroy
christophe.leroy at c-s.fr
Wed Dec 13 22:26:23 AEDT 2017
Since commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names()
to use device property accessors"), gpio chips have to have a
parent, otherwise devprop_gpiochip_set_names() prematurely exists
with message "GPIO chip parent is NULL" and doesn't proceed
'gpio-line-names' DT property.
This patch wraps the CPM GPIO into a platform driver to allow
assignment of the parent device.
Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
---
arch/powerpc/include/asm/cpm.h | 2 +-
arch/powerpc/include/asm/cpm1.h | 2 +
arch/powerpc/sysdev/Makefile | 3 +-
arch/powerpc/sysdev/cpm1.c | 33 ++++-------------
arch/powerpc/sysdev/cpm2.c | 11 ------
arch/powerpc/sysdev/cpm_common.c | 5 ++-
arch/powerpc/sysdev/cpm_gpio.c | 80 ++++++++++++++++++++++++++++++++++++++++
7 files changed, 97 insertions(+), 39 deletions(-)
create mode 100644 arch/powerpc/sysdev/cpm_gpio.c
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index b925df1b87d0..4c24ea8209bb 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -166,6 +166,6 @@ static inline int cpm_command(u32 command, u8 opcode)
}
#endif /* CONFIG_CPM */
-int cpm2_gpiochip_add32(struct device_node *np);
+int cpm2_gpiochip_add32(struct device *dev);
#endif
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 3db821876d48..a116fe931789 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -605,5 +605,7 @@ enum cpm_clk {
};
int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
+int cpm1_gpiochip_add16(struct device *dev);
+int cpm1_gpiochip_add32(struct device *dev);
#endif /* __CPM1__ */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 0baba21404dc..fc31a271830b 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -43,7 +43,8 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o
obj-$(CONFIG_CPM) += cpm_common.o
obj-$(CONFIG_CPM1) += cpm1.o
-obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o
+obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o cpm_gpio.o
+obj-$(CONFIG_8xx_GPIO) += cpm_gpio.o
obj-$(CONFIG_QUICC_ENGINE) += cpm_common.o
obj-$(CONFIG_PPC_DCR) += dcr.o
obj-$(CONFIG_UCODE_PATCH) += micropatch.o
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index f5544c6fbd18..e6ec2b1263b1 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -635,8 +635,9 @@ static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
return 0;
}
-int cpm1_gpiochip_add16(struct device_node *np)
+int cpm1_gpiochip_add16(struct device *dev)
{
+ struct device_node *np = dev->of_node;
struct cpm1_gpio16_chip *cpm1_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
@@ -666,6 +667,8 @@ int cpm1_gpiochip_add16(struct device_node *np)
gc->get = cpm1_gpio16_get;
gc->set = cpm1_gpio16_set;
gc->to_irq = cpm1_gpio16_to_irq;
+ gc->parent = dev;
+ gc->owner = THIS_MODULE;
return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
}
@@ -761,8 +764,9 @@ static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
return 0;
}
-int cpm1_gpiochip_add32(struct device_node *np)
+int cpm1_gpiochip_add32(struct device *dev)
{
+ struct device_node *np = dev->of_node;
struct cpm1_gpio32_chip *cpm1_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
@@ -782,31 +786,10 @@ int cpm1_gpiochip_add32(struct device_node *np)
gc->direction_output = cpm1_gpio32_dir_out;
gc->get = cpm1_gpio32_get;
gc->set = cpm1_gpio32_set;
+ gc->parent = dev;
+ gc->owner = THIS_MODULE;
return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
}
-static int cpm_init_par_io(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
- cpm1_gpiochip_add16(np);
-
- for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
- cpm1_gpiochip_add32(np);
-
- for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
- cpm1_gpiochip_add16(np);
-
- for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
- cpm1_gpiochip_add16(np);
-
- /* Port E uses CPM2 layout */
- for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
- cpm2_gpiochip_add32(np);
- return 0;
-}
-arch_initcall(cpm_init_par_io);
-
#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index f78ff841652c..07718b9a2c99 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -354,14 +354,3 @@ void cpm2_set_pin(int port, int pin, int flags)
else
clrbits32(&iop[port].odr, pin);
}
-
-static int cpm_init_par_io(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
- cpm2_gpiochip_add32(np);
- return 0;
-}
-arch_initcall(cpm_init_par_io);
-
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 51bf749a4f3a..b74508175b67 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -190,8 +190,9 @@ static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
return 0;
}
-int cpm2_gpiochip_add32(struct device_node *np)
+int cpm2_gpiochip_add32(struct device *dev)
{
+ struct device_node *np = dev->of_node;
struct cpm2_gpio32_chip *cpm2_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
@@ -211,6 +212,8 @@ int cpm2_gpiochip_add32(struct device_node *np)
gc->direction_output = cpm2_gpio32_dir_out;
gc->get = cpm2_gpio32_get;
gc->set = cpm2_gpio32_set;
+ gc->parent = dev;
+ gc->owner = THIS_MODULE;
return of_mm_gpiochip_add_data(np, mm_gc, cpm2_gc);
}
diff --git a/arch/powerpc/sysdev/cpm_gpio.c b/arch/powerpc/sysdev/cpm_gpio.c
new file mode 100644
index 000000000000..0badc90be666
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm_gpio.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common CPM GPIO wrapper for the CPM GPIO ports
+ *
+ * Author: Christophe Leroy <christophe.leroy at c-s.fr>
+ *
+ * Copyright 2017 CS Systemes d'Information.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <asm/cpm.h>
+#ifdef CONFIG_8xx_GPIO
+#include <asm/cpm1.h>
+#endif
+
+static int cpm_gpio_probe(struct platform_device *ofdev)
+{
+ struct device *dev = &ofdev->dev;
+ int (*gp_add)(struct device *dev) = of_device_get_match_data(dev);
+
+ if (!gp_add)
+ return -ENODEV;
+
+ return gp_add(dev);
+}
+
+static const struct of_device_id cpm_gpio_match[] = {
+#ifdef CONFIG_8xx_GPIO
+ {
+ .compatible = "fsl,cpm1-pario-bank-a",
+ .data = cpm1_gpiochip_add16,
+ },
+ {
+ .compatible = "fsl,cpm1-pario-bank-b",
+ .data = cpm1_gpiochip_add32,
+ },
+ {
+ .compatible = "fsl,cpm1-pario-bank-c",
+ .data = cpm1_gpiochip_add16,
+ },
+ {
+ .compatible = "fsl,cpm1-pario-bank-d",
+ .data = cpm1_gpiochip_add16,
+ },
+ /* Port E uses CPM2 layout */
+ {
+ .compatible = "fsl,cpm1-pario-bank-e",
+ .data = cpm2_gpiochip_add32,
+ },
+#endif
+ {
+ .compatible = "fsl,cpm2-pario-bank",
+ .data = cpm2_gpiochip_add32,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cpm_gpio_match);
+
+static struct platform_driver cpm_gpio_driver = {
+ .probe = cpm_gpio_probe,
+ .driver = {
+ .name = "cpm-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = cpm_gpio_match,
+ },
+};
+
+static int __init cpm_gpio_init(void)
+{
+ return platform_driver_register(&cpm_gpio_driver);
+}
+arch_initcall(cpm_gpio_init);
+
+MODULE_AUTHOR("Christophe Leroy <christophe.leroy at c-s.fr>");
+MODULE_DESCRIPTION("Driver for CPM GPIO");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cpm-gpio");
--
2.13.3
More information about the Linuxppc-dev
mailing list