[PATCH v2 14/14] powerpc/64s: idle ESL=0 stop can avoid MSR and save/restore overhead

[Nicholas Piggin]

When stop is executed with EC=ESL=0, it appears to execute like a
normal instruction (resuming from NIP when woken by interrupt).
So all the save/restore handling can be avoided completely. In
particular NV GPRs do not have to be saved, and MSR does not have
to be switched back to kernel MSR.

So move the test for "lite" sleep states out to power9_idle_stop.

Reviewed-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/kernel/idle_book3s.S | 40 ++++++++++++++-------------------------
 1 file changed, 14 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index fc5145339277..0d8dd9823bd3 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -264,31 +264,8 @@ enter_winkle:
 /*
  * r3 - PSSCR value corresponding to the requested stop state.
  */
-power_enter_stop:
-/*
- * Check if we are executing the lite variant with ESL=EC=0
- */
-	andis.   r4,r3,PSSCR_EC_ESL_MASK_SHIFTED
+power_enter_stop_esl:
 	clrldi   r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */
-	bne	 .Lhandle_esl_ec_set
-	PPC_STOP
-	li	r3,0  /* Since we didn't lose state, return 0 */
-
-	/*
-	 * pnv_wakeup_noloss() expects r12 to contain the SRR1 value so
-	 * it can determine if the wakeup reason is an HMI in
-	 * CHECK_HMI_INTERRUPT.
-	 *
-	 * However, when we wakeup with ESL=0, SRR1 will not contain the wakeup
-	 * reason, so there is no point setting r12 to SRR1.
-	 *
-	 * Further, we clear r12 here, so that we don't accidentally enter the
-	 * HMI in pnv_wakeup_noloss() if the value of r12[42:45] == WAKE_HMI.
-	 */
-	li	r12, 0
-	b 	pnv_wakeup_noloss
-
-.Lhandle_esl_ec_set:
 	/*
 	 * POWER9 DD2 can incorrectly set PMAO when waking up after a
 	 * state-loss idle. Saving and restoring MMCR0 over idle is a
@@ -361,9 +338,20 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66);		\
  * r3 contains desired PSSCR register value.
  */
 _GLOBAL(power9_idle_stop)
-	std	r3, PACA_REQ_PSSCR(r13)
+	/*
+	 * Check if we are executing the lite variant with ESL=EC=0
+	 * This case resumes execution after the stop instruction without
+	 * losing any state, so nothing has to be saved.
+	 */
 	mtspr 	SPRN_PSSCR,r3
-	LOAD_REG_ADDR(r4,power_enter_stop)
+	andis.	r4,r3,PSSCR_EC_ESL_MASK_SHIFTED
+	bne	1f
+	PPC_STOP
+	li	r3,0  /* Since we didn't lose state, return 0 */
+	blr
+1:	/* state-loss idle */
+	std	r3, PACA_REQ_PSSCR(r13)
+	LOAD_REG_ADDR(r4,power_enter_stop_esl)
 	b	pnv_powersave_common
 	/* No return */
 
-- 
2.13.3