[PATCH v2 11/14] powerpc/64s: idle POWER9 can execute stop without a sync sequence

Nicholas Piggin npiggin at gmail.com
Sat Aug 12 02:39:09 AEST 2017


Reviewed-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/include/asm/cpuidle.h | 16 ----------------
 arch/powerpc/kernel/idle_book3s.S  | 26 ++++++++++++++++++++------
 2 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h
index 52586f9956bb..6853a3741338 100644
--- a/arch/powerpc/include/asm/cpuidle.h
+++ b/arch/powerpc/include/asm/cpuidle.h
@@ -90,20 +90,4 @@ static inline void report_invalid_psscr_val(u64 psscr_val, int err)
 
 #endif
 
-/* Idle state entry routines */
-#ifdef	CONFIG_PPC_P7_NAP
-#define IDLE_STATE_ENTER_SEQ(IDLE_INST)                         \
-	/* Magic NAP/SLEEP/WINKLE mode enter sequence */	\
-	std	r0,0(r1);					\
-	ptesync;						\
-	ld	r0,0(r1);					\
-236:	cmpd	cr0,r0,r0;					\
-	bne	236b;						\
-	IDLE_INST;						\
-
-#define	IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST)			\
-	IDLE_STATE_ENTER_SEQ(IDLE_INST)                         \
-	b	.
-#endif /* CONFIG_PPC_P7_NAP */
-
 #endif
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 9a9a28f0758d..3b701b1a5e87 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -151,6 +151,19 @@ pnv_powersave_common:
 	mtmsrd	r7,0
 	bctr
 
+/*
+ * This is the sequence required to execute idle instructions, as
+ * specified in ISA v2.07. MSR[IR] and MSR[DR] must be 0.
+ */
+#define ARCH207_IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST)		\
+	/* Magic NAP/SLEEP/WINKLE mode enter sequence */	\
+	std	r0,0(r1);					\
+	ptesync;						\
+	ld	r0,0(r1);					\
+236:	cmpd	cr0,r0,r0;					\
+	bne	236b;						\
+	IDLE_INST;
+
 	.globl pnv_enter_arch207_idle_mode
 pnv_enter_arch207_idle_mode:
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
@@ -176,7 +189,7 @@ pnv_enter_arch207_idle_mode:
 	stb	r3,PACA_THREAD_IDLE_STATE(r13)
 	cmpwi	cr3,r3,PNV_THREAD_SLEEP
 	bge	cr3,2f
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
+	ARCH207_IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
 	/* No return */
 2:
 	/* Sleep or winkle */
@@ -215,7 +228,7 @@ pnv_fastsleep_workaround_at_entry:
 
 common_enter: /* common code for all the threads entering sleep or winkle */
 	bgt	cr3,enter_winkle
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
+	ARCH207_IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
 
 fastsleep_workaround_at_entry:
 	oris	r15,r15,PNV_CORE_IDLE_LOCK_BIT at h
@@ -237,7 +250,7 @@ fastsleep_workaround_at_entry:
 enter_winkle:
 	bl	save_sprs_to_stack
 
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
+	ARCH207_IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
 
 /*
  * r3 - PSSCR value corresponding to the requested stop state.
@@ -249,7 +262,7 @@ power_enter_stop:
 	andis.   r4,r3,PSSCR_EC_ESL_MASK_SHIFTED
 	clrldi   r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */
 	bne	 .Lhandle_esl_ec_set
-	IDLE_STATE_ENTER_SEQ(PPC_STOP)
+	PPC_STOP
 	li	r3,0  /* Since we didn't lose state, return 0 */
 
 	/*
@@ -282,7 +295,8 @@ power_enter_stop:
 	ld	r4,ADDROFF(pnv_first_deep_stop_state)(r5)
 	cmpd	r3,r4
 	bge	.Lhandle_deep_stop
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)
+	PPC_STOP	/* Does not return (system reset interrupt) */
+
 .Lhandle_deep_stop:
 /*
  * Entering deep idle state.
@@ -304,7 +318,7 @@ lwarx_loop_stop:
 
 	bl	save_sprs_to_stack
 
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)
+	PPC_STOP	/* Does not return (system reset interrupt) */
 
 /*
  * Entered with MSR[EE]=0 and no soft-masked interrupts pending.
-- 
2.13.3



More information about the Linuxppc-dev mailing list