[RFC v6 21/62] powerpc: introduce execute-only pkey

[Thiago Jung Bauermann]

Ram Pai <linuxram at us.ibm.com> writes:

> On Fri, Jul 28, 2017 at 07:17:13PM -0300, Thiago Jung Bauermann wrote:
>> 
>> Ram Pai <linuxram at us.ibm.com> writes:
>> > --- a/arch/powerpc/mm/pkeys.c
>> > +++ b/arch/powerpc/mm/pkeys.c
>> > @@ -97,3 +97,60 @@ int __arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
>> >  	init_iamr(pkey, new_iamr_bits);
>> >  	return 0;
>> >  }
>> > +
>> > +static inline bool pkey_allows_readwrite(int pkey)
>> > +{
>> > +	int pkey_shift = pkeyshift(pkey);
>> > +
>> > +	if (!(read_uamor() & (0x3UL << pkey_shift)))
>> > +		return true;
>> > +
>> > +	return !(read_amr() & ((AMR_RD_BIT|AMR_WR_BIT) << pkey_shift));
>> > +}
>> > +
>> > +int __execute_only_pkey(struct mm_struct *mm)
>> > +{
>> > +	bool need_to_set_mm_pkey = false;
>> > +	int execute_only_pkey = mm->context.execute_only_pkey;
>> > +	int ret;
>> > +
>> > +	/* Do we need to assign a pkey for mm's execute-only maps? */
>> > +	if (execute_only_pkey == -1) {
>> > +		/* Go allocate one to use, which might fail */
>> > +		execute_only_pkey = mm_pkey_alloc(mm);
>> > +		if (execute_only_pkey < 0)
>> > +			return -1;
>> > +		need_to_set_mm_pkey = true;
>> > +	}
>> > +
>> > +	/*
>> > +	 * We do not want to go through the relatively costly
>> > +	 * dance to set AMR if we do not need to.  Check it
>> > +	 * first and assume that if the execute-only pkey is
>> > +	 * readwrite-disabled than we do not have to set it
>> > +	 * ourselves.
>> > +	 */
>> > +	if (!need_to_set_mm_pkey &&
>> > +	    !pkey_allows_readwrite(execute_only_pkey))
> 		^^^^^
> 	Here uamor and amr is read once each.

You are right. What confused me was that the call to mm_pkey_alloc above
also reads uamor and amr (and also iamr, and writes to all of those) but
if that function is called, then need_to_set_mm_pkey is true and
pkey_allows_readwrite won't be called.

>> > +		return execute_only_pkey;
>> > +
>> > +	/*
>> > +	 * Set up AMR so that it denies access for everything
>> > +	 * other than execution.
>> > +	 */
>> > +	ret = __arch_set_user_pkey_access(current, execute_only_pkey,
>> > +			(PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
> 		^^^^^^^
> 		here amr and iamr are written once each if the
> 		the function returns successfully.

__arch_set_user_pkey_access also reads uamor for the second time in its
call to is_pkey_enabled, and reads amr for the second time as well in
its calls to init_amr. The first reads are in either
pkey_allows_readwrite or pkey_status_change (called from
__arch_activate_pkey).

If need_to_set_mm_pkey is true, then the iamr read in init_iamr is the
2nd one during __execute_only_pkey's execution. In this case the writes
to amr and iamr will be the 2nd ones as well. The first reads and writes
are in pkey_status_change.

>> > +	/*
>> > +	 * If the AMR-set operation failed somehow, just return
>> > +	 * 0 and effectively disable execute-only support.
>> > +	 */
>> > +	if (ret) {
>> > +		mm_set_pkey_free(mm, execute_only_pkey);
> 		^^^
> 		here only if __arch_set_user_pkey_access() fails
> 		amr and iamr and uamor will be written once each.

I assume the error case isn't perfomance sensitive and didn't account
for mm_set_pkey_free in my analysis.

>> > +		return -1;
>> > +	}
>> > +
>> > +	/* We got one, store it and use it from here on out */
>> > +	if (need_to_set_mm_pkey)
>> > +		mm->context.execute_only_pkey = execute_only_pkey;
>> > +	return execute_only_pkey;
>> > +}
>> 
>> If you follow the code flow in __execute_only_pkey, the AMR and UAMOR
>> are read 3 times in total, and AMR is written twice. IAMR is read and
>> written twice. Since they are SPRs and access to them is slow (or isn't
>> it?), is it worth it to read them once in __execute_only_pkey and pass
>> down their values to the callees, and then write them once at the end of
>> the function?
>
> If my calculations are right: 
> 	uamor may be read once and may be written once.
> 	amr may be read once and is written once.
> 	iamr is written once.
> So not that bad, i think.

If I'm following the code correctly:
    if need_to_set_mm_pkey = true:
        uamor is read twice and written once.
        amr is read twice and written twice.
        iamr is read twice and written twice.
    if need_to_set_mm_pkey = false:
        uamor is read twice.
        amr is read once or twice (depending on the value of uamor) and written once.
        iamr is read once and written once.

-- 
Thiago Jung Bauermann
IBM Linux Technology Center