[PATCH] hwmon: (ibmpowernv) Add min/max attributes and current sensors

Shilpasri G Bhat shilpa.bhat at linux.vnet.ibm.com
Fri Apr 21 22:39:48 AEST 2017


Hi Cedric,

On 04/21/2017 05:17 PM, Cédric Le Goater wrote:
> Hello Shilpasri,
> 
> On 04/21/2017 06:31 AM, Shilpasri G Bhat wrote:
>> Add support for adding min/max values for the inband sensors copied by
>> OCC to main memory. And also add current(mA) sensors to the list.
>>
>> Signed-off-by: Shilpasri G Bhat <shilpa.bhat at linux.vnet.ibm.com>
>> ---
>>  drivers/hwmon/ibmpowernv.c | 55 ++++++++++++++++++++++++++++++++++++++++++++--
>>  1 file changed, 53 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
>> index 6d2e660..1f329fa8 100644
>> --- a/drivers/hwmon/ibmpowernv.c
>> +++ b/drivers/hwmon/ibmpowernv.c
>> @@ -50,6 +50,7 @@ enum sensors {
>>  	TEMP,
>>  	POWER_SUPPLY,
>>  	POWER_INPUT,
>> +	CURRENT,
>>  	MAX_SENSOR_TYPE,
>>  };
>>  
>> @@ -65,7 +66,8 @@ enum sensors {
>>  	{"fan", "ibm,opal-sensor-cooling-fan"},
>>  	{"temp", "ibm,opal-sensor-amb-temp"},
>>  	{"in", "ibm,opal-sensor-power-supply"},
>> -	{"power", "ibm,opal-sensor-power"}
>> +	{"power", "ibm,opal-sensor-power"},
>> +	{"curr"}, /* Follows newer device tree compatible ibm,opal-sensor */
> 
> why isn't there a compatible string ? 
> 

Skiboot exports "ibm,opal-sensor" as compatible string for all the inband
sensors. Now if I define that as the compatible string here, then all the
sensors would get identified as "curr" type of sensor by the driver.

>>  };
>>  
>>  struct sensor_data {
>> @@ -287,6 +289,7 @@ static int populate_attr_groups(struct platform_device *pdev)
>>  	opal = of_find_node_by_path("/ibm,opal/sensors");
>>  	for_each_child_of_node(opal, np) {
>>  		const char *label;
>> +		int len;
>>  
>>  		if (np->name == NULL)
>>  			continue;
>> @@ -298,10 +301,14 @@ static int populate_attr_groups(struct platform_device *pdev)
>>  		sensor_groups[type].attr_count++;
>>  
>>  		/*
>> -		 * add a new attribute for labels
>> +		 * add attributes for labels, min and max
>>  		 */
>>  		if (!of_property_read_string(np, "label", &label))
>>  			sensor_groups[type].attr_count++;
> 
> We are negating of_property_read_string() above, but not below.
> I wonder why ? 

of_find_property() returns 'struct property *' while of_property_read_string()
returns 0 on success.

> 
>> +		if (of_find_property(np, "sensor-data-min", &len))
>> +			sensor_groups[type].attr_count++;
>> +		if (of_find_property(np, "sensor-data-max", &len))
>> +			sensor_groups[type].attr_count++;
>>  	}
>>  
>>  	of_node_put(opal);
>> @@ -428,6 +435,50 @@ static int create_device_attrs(struct platform_device *pdev)
>>  			pgroups[type]->attrs[sensor_groups[type].attr_count++] =
>>  				&sdata[count++].dev_attr.attr;
>>  		}
>> +
>> +		if (!of_property_read_u32(np, "sensor-data-max", &sensor_id)) {
>> +			switch (type) {
>> +			case POWER_INPUT:
>> +				attr_name = "input_highest";
>> +				break;
>> +			case TEMP:
>> +				attr_name = "max";
>> +				break;
>> +			default:
>> +				attr_name = "highest";
>> +				break;
>> +			}
> 
> May be we could use a converting routine here ? create_device_attrs()
> is getting big.

Okay will do.

> 
>> +			sdata[count].id = sensor_id;
>> +			sdata[count].type = type;
>> +			sdata[count].hwmon_index = sdata[count - 1].hwmon_index;
>> +			create_hwmon_attr(&sdata[count], attr_name,
>> +					  show_sensor);
>> +			pgroups[type]->attrs[sensor_groups[type].attr_count++] =
>> +				&sdata[count++].dev_attr.attr;
>> +		}
>> +
>> +		if (!of_property_read_u32(np, "sensor-data-min", &sensor_id)) {
>> +			switch (type) {
>> +			case POWER_INPUT:
>> +				attr_name = "input_lowest";
>> +				break;
>> +			case TEMP:
>> +				attr_name = "min";
>> +				break;
>> +			default:
>> +				attr_name = "lowest";
>> +				break;
>> +			}
> 
> same here.

Sure.

Thanks and Regards,
Shilpa

> 
> Thanks,
> 
> C.
>> +			sdata[count].id = sensor_id;
>> +			sdata[count].type = type;
>> +			sdata[count].hwmon_index = sdata[count - 1].hwmon_index;
>> +			create_hwmon_attr(&sdata[count], attr_name,
>> +					  show_sensor);
>> +			pgroups[type]->attrs[sensor_groups[type].attr_count++] =
>> +				&sdata[count++].dev_attr.attr;
>> +		}
>>  	}
>>  
>>  exit_put_node:
>>
> 



More information about the Linuxppc-dev mailing list