[PATCH v6 02/11] powerpc/powernv: Autoload IMC device driver module

[Daniel Axtens]

Hi all,

I'm trying to get my head around these patches - at this point I'm just
doing a first pass, so I may have more substantive structural comments
later on. In the mean time - here are some minor C nits:

> + * Copyright	(C) 2016 Madhavan Srinivasan, IBM Corporation.
> + *		(C) 2016 Hemant K Shaw, IBM Corporation.

Should these be bumped to 2017?

> +
> +		do {
> +			pages = PAGE_SIZE * i;
> +			pcni->vbase[i++] = (u64)phys_to_virt(pcni->pbase +
> +							     pages);
> +		} while (i < (pcni->size / PAGE_SIZE));
> +	}
I had to scroll back up to the top of this function to make sure I
understood what this loop does. Would it be better to write it as:

for (i = 0; i < (pcni->size / PAGE_SIZE); i++) {
    pages = PAGE_SIZE * i;
    pcni->vbase[i] = (u64)....
}

And, just checking - this is expected to work on both 4 and 64kB pages?

> +
> +	return 0;
> +err:
> +	return -ENODEV;

You're not releasing any resources here - would it be better to just
replace the gotos with this return? I haven't checked to see if you
change the function later on to allocate memory - if so please ignore :)

> +}
> +
> +static const struct of_device_id opal_imc_match[] = {
> +	{ .compatible = IMC_DTB_COMPAT },
> +	{},
> +};
> +
> +static struct platform_driver opal_imc_driver = {
> +	.driver = {
> +		.name = "opal-imc-counters",
> +		.of_match_table = opal_imc_match,
> +	},
> +	.probe = opal_imc_counters_probe,
> +};
> +
> +MODULE_DEVICE_TABLE(of, opal_imc_match);
> +module_platform_driver(opal_imc_driver);
> +MODULE_DESCRIPTION("PowerNV OPAL IMC driver");
> +MODULE_LICENSE("GPL");
> diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
> index e0f856bfbfe8..85ea1296f030 100644
> --- a/arch/powerpc/platforms/powernv/opal.c
> +++ b/arch/powerpc/platforms/powernv/opal.c
> @@ -14,6 +14,7 @@
>  #include <linux/printk.h>
>  #include <linux/types.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>
>  #include <linux/of_fdt.h>
>  #include <linux/of_platform.h>
>  #include <linux/interrupt.h>
> @@ -30,6 +31,7 @@
>  #include <asm/opal.h>
>  #include <asm/firmware.h>
>  #include <asm/mce.h>
> +#include <asm/imc-pmu.h>
>  
>  #include "powernv.h"
>  
> @@ -631,6 +633,15 @@ static void opal_pdev_init(const char *compatible)
>  		of_platform_device_create(np, NULL, NULL);
>  }
>  
> +static void opal_imc_init_dev(void)
> +{
> +	struct device_node *np;
> +
> +	np = of_find_compatible_node(NULL, NULL, IMC_DTB_COMPAT);
> +	if (np)
> +		of_platform_device_create(np, NULL, NULL);
> +}

Should this function be tagged __init?

> +
>  static int kopald(void *unused)
>  {
>  	unsigned long timeout = msecs_to_jiffies(opal_heartbeat) + 1;
> @@ -704,6 +715,9 @@ static int __init opal_init(void)
>  	/* Setup a heatbeat thread if requested by OPAL */
>  	opal_init_heartbeat();
>  
> +	/* Detect IMC pmu counters support and create PMUs */
> +	opal_imc_init_dev();
> +
>  	/* Create leds platform devices */
>  	leds = of_find_node_by_path("/ibm,opal/leds");
>  	if (leds) {
> -- 
> 2.7.4