[PATCH] PCI: Add parameter @mmio_force_on to pci_update_resource()

[Gavin Shan]

On Wed, Sep 28, 2016 at 07:45:32AM +1000, Benjamin Herrenschmidt wrote:
>On Tue, 2016-09-27 at 14:20 -0500, Bjorn Helgaas wrote:
>> On Mon, Sep 19, 2016 at 09:53:30AM +1000, Gavin Shan wrote:
>> > In pci_update_resource(), the PCI device's memory decoding (0x2 in
>> > PCI_COMMAND) is disabled when 64-bits memory BAR is updated if the
>> > PCI device's memory space wasn't asked to be always on by @pdev->
>> > mmio_always_on. The PF's memory decoding might be disabled when
>> > updating its IOV BARs in the following path. Actually, the PF's
>> > memory decoding shouldn't be disabled in this scenario as the PF
>> > has been started to provide services:
>> 
>> The reason we disable memory decoding while updating a 64-bit BAR is
>> because we can't do the update atomically, and a half-updated BAR might
>> conflict with other devices.
>> 
>> You need to explain what is special about these SR-IOV BARs that makes it
>> safe to update them non-atomically while decoding is enabled.
>
>The IOV BAR won't decode until SR-IOV is enabled right ? Gavin, I don't
>think we update it "live", so it should be safe...
>

Yeah, it's safe to update it with memory decoding on. As the function call
flow I listed in the changelog (as below), nobody should access the IOV BAR
when pci_update_resource() is called. However, the PF's memory BARs might
be accessed that time and it's not safe to disable PF's memory decoding.

   sriov_numvfs_store
   pdev->driver->sriov_configure
   mlx5_core_sriov_configure
   pci_enable_sriov
   sriov_enable
   pcibios_sriov_enable
   pnv_pci_sriov_enable
   pnv_pci_vf_resource_shift
   pci_update_resource

Thanks,
Gavin