[v6,2/2] QE: remove PPCisms for QE
Qiang Zhao
qiang.zhao at nxp.com
Mon Sep 26 11:46:37 AEST 2016
On Sun, Sep 25, 2016 at 12:19PM -0500, Scott Wood wrote:
> -----Original Message-----
> From: Scott Wood [mailto:oss at buserror.net]
> Sent: Sunday, September 25, 2016 12:19 PM
> To: Qiang Zhao <qiang.zhao at nxp.com>
> Cc: linuxppc-dev at lists.ozlabs.org; pku.leo at gmail.com; X.B. Xie
> <xiaobo.xie at nxp.com>; linux-kernel at vger.kernel.org
> Subject: Re: [v6,2/2] QE: remove PPCisms for QE
>
> On Sat, Sep 24, 2016 at 11:14:11PM -0500, Scott Wood wrote:
> > On Fri, Sep 23, 2016 at 10:20:32AM +0800, Zhao Qiang wrote:
> > > QE was supported on PowerPC, and dependent on PPC, Now it is
> > > supported on other platforms. so remove PPCisms.
> > >
> > > Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
> > > ---
> > > Changes for v2:
> > > - na
> > > Changes for v3:
> > > - add NO_IRQ
> > > Changes for v4:
> > > - modify spin_event_timeout to opencoded timeout loop
> > > - remove NO_IRQ
> > > - modify virq_to_hw to opencoed code Changes for v5:
> > > - modify commit msg
> > > - modify depends of QUICC_ENGINE
> > > - add kerneldoc header for qe_issue_cmd Changes for v6:
> > > - add dependency on FSL_SOC and PPC32 for drivers
> > > depending on QUICC_ENGING but not available on ARM
> > >
> > > drivers/irqchip/qe_ic.c | 28 +++++++-----
> > > drivers/net/ethernet/freescale/Kconfig | 10 ++---
> > > drivers/soc/fsl/qe/Kconfig | 2 +-
> > > drivers/soc/fsl/qe/qe.c | 80 ++++++++++++++++++++--------------
> > > drivers/soc/fsl/qe/qe_io.c | 42 ++++++++----------
> > > drivers/soc/fsl/qe/qe_tdm.c | 8 ++--
> > > drivers/soc/fsl/qe/ucc.c | 10 ++---
> > > drivers/soc/fsl/qe/ucc_fast.c | 68 ++++++++++++++---------------
> > > drivers/tty/serial/Kconfig | 2 +-
> > > drivers/usb/gadget/udc/Kconfig | 2 +-
> > > drivers/usb/host/Kconfig | 2 +-
> > > include/soc/fsl/qe/qe.h | 1 -
> > > include/soc/fsl/qe/qe_ic.h | 12 ++---
> > > 13 files changed, 141 insertions(+), 126 deletions(-)
> >
> > I assume this means you'll be updating
> > http://patchwork.ozlabs.org/patch/654473/
> > to be based on top of this...
>
> Apparently that assumption was wrong, since I now see that you're patching
> drivers/irqchip/qe_ic.c rather than drivers/soc/fsl/qe/qe_ic.c.
> Please keep the drivers/irqchip stuff separate and send to the appropriate
> maintainers.
>
You means separate drivers/irqchip/qe_ic.c part from this patch and send it with the other qe_ic patches?
Is it acceptable if I modify qe_ic.c with drivers/soc/fsl/qe/qe_ic.c, then send qe_ic patches to move qe_ic to drivers/irqchip?
BR
-Zhao Qiang
More information about the Linuxppc-dev
mailing list